Other Forestry Equipment
other forestry equipment — pre-owned
Browse 514 other forestry equipment — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
ISC Rope Wrench With @Height 12” Tether
ISC Rope wrench with 12” @height single eye stiff tether Great condition very little use
ROCK EXOTICA ROPE GRAB 90 DEGREE W/ 7.5’ ROPE ARBORIST Tree /Rock CLIMBING
Like new condition! 1/2 inch 16 strand 350lb rope. 3800 lb gate,5k lb hookThe Rock Exotica Rope Grab 90 Degree with 7.5' rope is specifically designed for arborists and rock climbers. With a weight capacity of 5k lbs, this product provides a secure attachment for accessing trees and rocks with confidence. The 90-degree angle and included rope grab enhance the versatility and safety of the user while navigating challenging terrain in forestry and climbing applications. Made by the trusted brand Rock Exotica, this product ensures durability and reliability in demanding environments.
Main Drive Gearbox for Long, Fort F25 Disc Mower
Main Drive Gearbox for Long, Fort F25 Disc Mower
Spencer 50’ Original Loggers Tape + horseshoe nail - Seattle WA
The Spencer 50' Original Loggers Tape is a forestry equipment essential for measuring tree diameter at breast height. Made by the renowned brand Spencer in the United States, this model 950DC tape ensures accuracy in forestry management. The addition of a horseshoe nail in Seattle, WA adds value to the product, making it a must-have for those in the agriculture and forestry industry seeking precision and quality tools for their operations. In very good condition. May need some oil to reduce squeaking, but reels all the way out, and back again under its own spring force. Thanks for checking it out!
Spencer 50’ Pro Loggers Tape 1/8” Scale Both Sides 950 45139 W/ Horse Shoe Nail
This is in good used condition. The numbers look good and the recoil works just like it should.
Spencer 75’ Pro Loggers Tape 1/8” Both Sides Model 975 w/Hoop & Nail - Rebuilt
This tape works great! The tape retracts well, has 1/8” marking on each side. I buy old tapes and get them going again. We started with a pretty good base tape. We opened it up and removed the dried up grease and use lithium grease in its place.
Spencer Products Original Loggers Tape
This is a Spencer Products Original Loggers Tape. It is used, showing the occasional fine scratch, mark. Doesn't appear to be carried much; shows a little dirt but not the wear of constant daily use.
Spencer 50’ Loggers Tape (new refill) + horseshoe nail
With Loop End (horseshoe nail pre-attached). Spencer Logger’s Tape, 50´ English with Loop End Model 950DC.
Spencer 50’ Loggers Tape 1/8” & Diameter 1/10th 950DC Dymax/Release Nail Rebuilt
We opened up and cleaned the old grease out, and cleaned each part. During reassembly, we lubricated the gears and other moving parts. The gears were inspected Good as was both case halves. The hangar and clasp were good too.
FORESTRY WILDLAND FIRE FOG NOZZLE #3 BRASS BASE USED GREAT CONDITION FAST SHIP
Used in good working condition. Nozzle only. See pictures for details. Fast shipping.
You save $4.00
8ft Aermotor Windmill Sail Fan 3 Blade Sections vintage
8ft A-702 Aermotor Windmill Sail Fan 3 Blade Section some vintage good enough to be put back up . Less than perfect condition, some are better than others. I will pick out the best ones first when sold. Can combine shipping costs when possible.. WHAT U ARE BUYING IS ONE 3 BLADE SECTION.
8ft Aermotor A-602 Windmill Pitman Arm A-506, Repoured, ONE or MORE
As titled. Early style single pin long stroke pitman arms.
Spencer 50’ Loggers Tape 1/8” Completely Rebuilt 950 45139 Dymax/Release Nail
This used Spencer tape looks and works great! I buy old tapes and get them going again. The pictures show the tape you will receive. It also shows the Release Nail; Stowed, Ready and Released. When the tape retracts, reset the Release Nail and you're ready to go.
PAC-MAC KBF-220A LOG CRANE AND PLATFORM ONLY (***TRUCK NOT INCLUDED***)
Stabilization: UsesA-style outriggers for a stable base during heavy log loading; these are designed for easy removal and maintenance. Rotation: 360° continuous rotation when equipped with therotating platform ; 270° non-continuous for stand-up versions.
SUUNTO PM-5/1520 OPTI HEIGHT METER
SUUNTO PM-5/1520 OPTI HEIGHT METER. Sold as is U
Windmill Sail Fan 43” ONE 3 Blade Section vintage from Nebraska
Windmill Sail Fan blades ONE 3 Blade Section vintage. This is not a remake. You are getting one three blade section with this listing. Measures 31” tall x 43” widest point From Nebraska farmland!
Aermotor Windmill 10ft B702 Bearing for large gears, B752
This is a large gear bearing for Aermotor 702 windmills. This is a used casting with new babbit. Same as the new ones for greatly reduced prices. No flaws nothing wrong. Located at our warehouse, local pickup is welcome.
Rayco Genuine Super Tooth Stump Cutter Teeth 3144T (Threaded/Straight)
Priced per piece! Wanted to show condition of all 3 pieces of the 3144T Fast and free shipping These look to be new but could be refurbished.
ISC RP052 ALUMINUM RIGGING BLOCK 22,480 LB MBS 16MM OR 3/4" - 16454, 2.2 Ton
Used!
Two! Spencer Products Original Loggers Tapes
Two 50' loggers tapes. Both need a new refill. for parts/repair
Rayco Genuine Super Tooth Stump Cutter Teeth 2933T (Threaded/Straight)
Priced per piece! Wanted to show condition of all 7 pieces of the 2933T Fast and free shipping These look to be brand new but could be refurbished
Clayton Mark leathers Windmill Cylinder Pump Well Water Leather Cup hand pump
It is untested. It is from a retired well guys inventory.
You save $21.64
Rayco Genuine Super Tooth Stump Cutter Teeth 2933C
Priced per piece… All 6 are pictured to show condition Fast and free shipping!! There look to be new but could be refurbished
Windmill Cylinder Pump Well Water Leather Cup hand pump
It is untested. It is from a retired well guys inventory.
You save $27.64
Windmill Tower Ladder Step, LEFT Hand SIDE, Appleton or Heller Aller
Good usable condition. No cracks or repairs.
SUUNTO PM-5/1520 OPTI HEIGHT METER
The Suunto PM-5/1520 Opti Height Meter is a compact and accurate device for measuring height. Made in Finland, this model is designed for precision and reliability. With dimensions of 75 x 52 x 15 mm, it is portable and easy to use. The Opti Height Meter from Suunto is a top choice for those seeking a high-quality tool for measuring height in various applications.
Hay/tractor gooseneck trailor
Dual axles (4 trailer wheels total). Width: about 7–8 feet. Length: about 16–20 feet. Approximate Specifications (from the photo). Wooden deck surface.
Vintage NOS Replacement Buckingham Climbers #9209 Gaffs, Pole Work, Logging
Good unused condition.
136-7966 Cat 938 Link
136-7966 Cat 938 Link. Condition is "Used". Has new bushings
DMM Small IMPACT ARBORIST RIGGING BLOCK IMB-L, 33785
Pre owned see photos
You save $45.00
MeanWell SP-500-48 P Unit 48V Output USED.
used but in great condition, pulled from a working item, comes only as shown, no other kind of accesories included apart from what is pictured, .
You save $12.92
Wilhelm Göhler Revolver Numbering Slegel 1 3/4C 1.128HTG
For sale is a revolver numbering flail by Wilhelm GöhlerForestry tool.Description of conditionThe object shows minor signs of age-related wear. The photos are part of the description. MassLength: 375mmØ Head: 100 mmWeight: 1,500g * * * * * *Notes- Please look at the photos carefully on, these are ingredient the description, you are bidding on what you see Exception …- ... any aids shown for creating the photographs, these are not part of the offer (such as pedestals, brackets, supports, batteries, lamps, decoration, backgrounds, etc.).- Please ask any questions before purchasing.- I would be happy to send you additional photos upon request.- If possible, I recommend viewing the property on site.- Please also check out my other listings.Shipping conditions- I ship with DHL (parcel, parcel,.
8ft A702 & A602 Aermotor Windmill Sail Fan Blade Set of 3, VINTAGE, A100
As titled. SAILS WIL BE REMOVED FROM THE BANDs & RIBS. BANDs & RIBs NOT INCLUDED. Fits either 8ft 602 or 702 mills.
8ft Aermotor A702 & A602 Windmill Buffer, A659, vintage
A659 Buffer, good used.
6ft Aermotor Windmill Wheel Band, Inner X-702 or X-602, X35
As titled. Good used condition. No breaks or repairs. Fits 6ft X702 & 602 mills.
8ft Aermotor A702 A602 Windmill Tail - Vane Mounting U-bolts A44/45/46/47
8ft Aermotor A702 A602 Windmill Tail - Vane Mounting Brackets
Tiger SIDE FLAIL MOWER OPERATION MAINTENANCE MANUAL PARTS BOOK CATALOG JD 5520
SIDE FLAIL MOWER. FOR JOHN DEERE 5520 TRACTOR. OPERATION, MAINTENANCE & PARTS MANUAL. THIS MANUAL IS IN VERY GOOD CONDITION. COVER AND EDGES LIGHTLY SOILED AND WORN, INSIDE IS LIKE NEW. ABOUT 150 PAGES TOTAL, FORM: 34295.
Aermotor Windmill A702 8ft Bearing for large gears, A752
You are buying a repoured A752 bearing. These are poured with the same Babbit and quality of new bearings without the cost of paying for the casting. No defects, just cost savings. As with all our items we actually have them in our warehouse and your welcome to come pick them up.
Our America: Lumber; 1950's Coca-Cola Corporate-sponsored Educational Book
There is a strong emphasis on conserving our natural resources. Half of the book is a workbook. They have early locomotives, too. "Trees cut down must be replaced.".
CME Colorado Mill Equipment Pellet Cooler & Screener Model ECO-CF3 - Wood & Feed
These units stack on top of eachother to make one unit that works together and saves space.