Metalworking Equipment Replacement Parts

South Bend 9 10K Lathe Quick Change Gear Box Model A

This South Bend 9 10K model A Lathe Quick Change Gear Box is in used working condition. A & L Industries or Tooltimes2 has been on eBay for 20 plus years. We can help you with parts or whole machines and we can also help with your surplus inventory or if you are getting rid of surplus equipment. We can ship anywhere or ship on your account and we offer pick-up.

Lathe Carriage Stop For Boxford Lathe

Lathe carriage stop for boxford Lathe Good working condition May need cleaning Any questions please ask Thanks for looking

1918 South Bend Early 13” Swing No.34 Lathe 110T Change Gear (1A-4)

Jergens 18", 5 Spoke Offset Handwheel 4-1/8 Inch Hub, Alloy, Plain Finish

These are used Jergen's 18" hand wheel with an Aluminum Alloy finish and a 4-1/8 Inch Hub.

BRIDGEPORT QUILL MASTER ATTACHMENT TYPE JA

Bridgeport quilmaster.

LOGAN 10" Or 11" SWING METAL LATHE STEADY REST SEE MEASUREMENTS TO CONFIRM FIT

Metal lathe steady rest for 15" swing Unknown make

Unknown make, I have no idea what machine this was for. check all pics. Good used condition. shows signs of use. Two of the knobs are missing.

Complete Belt Tensioning Linkage For 9" South Bend Lathe

This is the complete belt tensioning linkage for a 9" south bend.

Walker Turner Slow Speed Drive

Off of working drill press

Adams Antique Wood & Metal Cast Sand Casting Flask Frame Mold Foundry 12 x 14

12 x 14 sand flask for metal casting.

Sheldon Metal Lathe Milling Attachment Accessory KM 410 411 412 Machinist Tool

In good shape backlash .010 Needs oil ready to go Might fit on a south bend lathe since they are similar. Probably the 9 or 10K

Craftsman 109 20630 Lead Screw Hand Wheel Knob 6" Metal Lathe Dunlap

Actual item pictured.

Used - Seat Ring Driver Mandrel for Winona Tapered Style Cutters

This is a Seat Ring Cutter Driver set. It is for a Winona PH2000, PH3000, or PH6000 with the old Winona Tapered I.D. Seat ring cutters. Construction Equip Manuals. Cylinder Block Reconditioning. Tab 5 Content.

HYDRAULIC PUMP VICKERS 25V17A 1C22R WITH FUJI AF 300 MINI VARI FREQUENCY DRIVE

DRIVE; GE FUJI AF 300 MINI VARIBLE FREQUENCY DRIVE MOTOR; DAYTON 5 HP 1750 RPM 3 PHASE MOTOR PUMP; VICKERS EATON 25V17A 1C22R 17 GPM WAS USED ON SURFACE GRINDER HYDRAULUC PUMP FOR TABLE MOVEMENT WORKS AS IT SHOULD. NO PROBLEMS AS IS WHERE IS

Haas Y axis Servo Motor Drive Cables For Brush Motor.

The Haas Servo Motor Drive Cables are specifically designed for use with brush motors in machining centers and milling machines. Made in the United States by the reputable brand Haas, these cables ensure reliable and efficient power transmission for precise and accurate machine operation. Ideal for those in need of high-quality replacement cables for their Haas machinery, these products offer durability and dependability for smooth performance in a variety of industrial applications.

South Bend 9" Lathe Headstock End Gear Cover (Alloy) w/ Bracket

South Bend Turn Nado Lathe Thread Threading Metric Transposing Gears

We Have a South Bend Lathe or a turn nado 17 inch gear set for Metric thread cutting. A & L Industries or Tooltimes2 has been on eBay for 23 plus years. We can help you with parts or whole machines, and we can also help with your surplus inventory or if you are getting rid of surplus equipment. Thanks for your interest. We can ship anywhere or ship on your account and we offer pick-up.

BURR KING Smooth & Groved Contact Wheel Dynabrade Unbranded PARTS BLADE MAKING

Hi, here is a group of parts for your consideration. Selling all the parts as one lot. If you have any questions please don't hesitate to ask. Thanks

Van Norman 777-S Boring Bar Drive Gear / Clutch 777-99

Gear for Van Norman Model 777-S Boring Bar This is the Steel Gear that the Hand Crank Engaged onto. Sunnen / Rod Reconditioning. Cylinder Block Reconditioning. We will do our best to help you in any way we can.

South Bend 9” Metal Lathe Countershaft Pulley (3C)

Bridgeport VMC 800 1000 Milling 12598604 4th Axis Drive Interface

Model - 12598604. Approximate Height - 20". Approximate Width - 24". Part Number - N/A. Condition - Lightly used. Good condition. No PO boxes.

Original South Bend Model A Threading / Feed Chart, Chart #1 - Brass

The chart is marked. # C - 1644Y ; 3' Bed ; Chart 1. The numbers and letters all appear to be legible, and if you are looking to keep a restoration project original then this chart should serve the purpose.

SUNNEN AN-1060 HONE DRIVER CH-100 LINE HONE

DRIVER HAS BEEN USED VERY LITTLE.

Hurco Keypad Ultimax 4 Touchscreen Bezel Dual Display

This item will include the digitizer module that interfaces to the Ultimax machine.

SOUTH BEND LATHE 5C COLLET RACK FOR A 16 X 6 LOC8616

I WILL BE PARTING THIS LATHE OUT. SIZE OF LATHE 16 X 6. MODEL NUMBER OF LATHE 8117C.

South Bend 9 10K Lathe Quick Change Gear Box

This South Bend 9 10K Lathe Quick Change Gear Box is in used working condition. A & L Industries or Tooltimes2 has been on eBay for 20 plus years. We can help you with parts or whole machines and we can also help with your surplus inventory or if you are getting rid of surplus equipment. We can ship anywhere or ship on your account and we offer pick-up.

South Bend 9” Model A Metal Lathe 48” Bed And Rack

SOUTH BEND LATHE COLLET HOLDER MOUNT FOR A 16 X 6 LOC8619

I WILL BE PARTING THIS LATHE OUT. SIZE OF LATHE 16 X 6. MODEL NUMBER OF LATHE 8117C.

Lincoln OEM Transformer and Choke Assembly (9SG4808-2 / G4808-2)

Fits the following machines: Easy MIG 140 - 11504 MIG PAK 140 - 11440 POWER MIG 140 - 11804 POWER MIG 140C - 11255, 11819 Power MIG 140C - 12632 POWER MIG 140T - 11254 Pro MIG 140 - 11173 SP140T - 11501, 11658, 11805, 11821 WeldPak 140HD - 11303

Heidenhain UV105 Power Supply Module 5V 20A IS 367 182-01

Heidenhain UV105 Power Supply Module 5V 20A IS 367 182-01 Used I pulled form another Retrofit and they operate.

2013-2015 Honda Accord LeftSide Headlight Assembly Replacement w/bracket

with bracket

Gorton Machine Co. Pantograph Swivel /Slide Mount (Loc:Set-5)

Gorton Machine Co. Pantograph Swivel /Slide Mount (Loc:Set-5).

Vintage Lot of 4 Crane Manufacturing Co 120 16 Index Gear - FREE SHIPPING

Lot of 4 indexing plates. I can't find much info on these. Stamped Crane Mfg Co and 16 120. Appear to be in good condition. Not Happy?. What else can I say?. Pictures are of the actual item you will receive.

Servo Dynamics SDFPO1525-17 FET Off Line Module Autocon DynaPath Delta

Servo Dynamics SDFPO1525-17 FET Off Line Module Autocon DynaPath Delta Description Excellent Condition Surplus Tested and Guaranteed WorkingPulled from a fully functional Autocon/Dynapath Delta CNC controller.What's Included: 1x Servo Dynamics SDFPO1525-17 FET Off Line Module Does not include any additional cables, parts, or accessories. This servo FET module is a suitable replacement for Autocon/DynaPath Delta systems and possibly systems from other manufacturers like Bridgeport. Specifications: ManufacturerServo DynamicsModelSDFPO1525-17 Thanks for viewing! Visit Our eBay Store Please check out our other items!.

Miller 156313 LEM Current Module _*WARRANTY!_*OVERNIGHT AVAILABLE*

•Miller 156313 LEM Current Module. • This Pcb was pulled from a “working / retired” Miller Welder Power Source.

South Bend 11 lathe 24 & 27 tooth reverse tumbler Nylon gear 5/8 bore 11/16 wide

24 and 27 tooth Nylon 2 gear set. Center bore (not keyed) 5/8. This is a FDM made Nylon gear set of two.

4 SPOKE MACHINE HANDWHEEL antique post drill tool crank handle steampunk table

Large 4 spoke handwheel of the type seen on some early blacksmith drills and other vintage machine tools. Tip to tip is 22 inches. Mounting hole is 1 inch. 1 1/2 inches thick at hub. Actual weight is 10 lbs Would serve as an interesting table base for a project.

Hurco 415-0605-903 CANBUS Controller

I have a few of these; The item in the photos may not be the one you receive.

EDMUNDS GAGES CAG QCM COMPUTER AIDED GAGING SYTSTEM 60-0302738

FREIGHT POLICY.

South Bend Heavy 10. Lathe Quick Change Gearbox and, Leadscrew.

The gears have all of their teeth, wear seems to be minimal and the spindles are in good shape which is the heart of the gear box. The bearings are toast and you will need a new set of bearings and a leather spacer also.