Press Brakes

Trumpf 827275 EV0036W20 Brake Press Die 30° 30mm Wide R2.0 H=100mm Laser dur

SKU: 236895 - Trumpf 827275 EV0036W20 Brake Press Die 30° 30mm Wide R2.0 H=100mm Laser dur - Trumpf - Used 827275 . -- Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. If your purchase requires a pallet, banding or any other form of packaging, a packaging fee may apply.

Hydraulic Press 25-Tons (aproximadamente) Double Acting Two-Stage.

Hydraulic Press 25-Tons (aproximadamente) Double Acting Two-Stage.

Press Brake Gooseneck Punch Die 36" Long 1/2" Wide Finger

(1x) 1/2" Finger Gooseneck Top Die. The dies may have small blemishes or defects but are fit for use. Dies are not precision cut to length. Length: 36”. Tongue Style: Standard Tooling Tongue (1/2 x 5/8”).

Rotex Punch Co. MB900 Minute Break Machine

Up for your consideration is a Rotex Punch Co. MB900 Minute Break Machine. Item is in used condition. Please feel free to ask any questions about this item. Pickup Only in 19605. Thank you for your consideration.

Vee Set Gooseneck Press Brake Upper Lower Tooling Punch V Die Forming segmented

VERY POOR CONDITION. Press brake dies arenot hardened so you can sand or grind them if you want to try to improve them. The foot is 90 degrees x 1/2" wide. The bottom v die is 1" wide.

AMADA RG‑35S CNC Press Brake 35 Ton USED

Press Brakes. Between Housings. Overall Length.

Amada 100mm 88° One Touch V-Forming Press Brake Gooseneck Die Punch R3.0

100mm Long. Country of Manufacture: Australia. Unless otherwise specifically agreed to in writing by. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following.

Trumpf 824397 EV026-W24 Brake Press Die 86° 500mm Wide R2.50 H=100mm Laser dur

SKU: 237078 - Trumpf 824397 EV026-W24 Brake Press Die 86° 500mm Wide R2.50 H=100mm Laser dur - Trumpf - Used 824397 . -- Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. If your purchase requires a pallet, banding or any other form of packaging, a packaging fee may apply.

12" LONG x 6 degree PRESS BRAKE DIE metal bending fab shop tool

Good used Press Brake Die. approx 12" x 6 DEGREE. approx 1/2" tongue x 1-1/16" wide x 4-5/8" tall x 12" LONG.

1/2, 5/8, 7/8" W Press Brake Tooling V Vee Die Forming Segmented bottom lower

SEE PICTURES FOR SIZES AND DETAILS.

Press Brake Tool Die Tooling Lot of 4

3/16" Vee 12" to 49" Press Brake Tooling Arrow V Die Forming Shop H bottom lower

(un-cut) UP TO 49.5" LONG.

28" Set Gooseneck Press Brake Upper Lower Tooling Punch V Die Forming segmented

The foot is 90 degrees x 3/16" wide. The bottom v die is 5/8" wide.

4’ To 16’ 1/2” Vee Opening Bottom Die . Sheet Metal Forming Die .5” V Opening

Used has some surface rust but it cleans up easily. 4 foot long sections.

Segmented .55 V Opening Bottom Die Brake Press Tooling Sheet Metal Forming

1-23 11/16 1-9 11/16 Please see pictures Thanks

26” Segmented .55 V Opening Bottom Die Brake Press Tooling Sheet Metal Forming

2-13 1/4” Please see pictures Thanks

Carolina tool and equipment CBP-1200 50 ton hydraulic Shop press CBP1200

Condition Used Good Working.

NATIONAL Box & Pan Brake - Model U4812

Model U4812. NATIONAL Box & Pan Brake. 12Ga Steel.

Amada 50mm 88° One Touch V-Forming Press Brake Gooseneck Die Punch R3.0

Country of Manufacture: Australia. Unless otherwise specifically agreed to in writing by. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following.

Press Brake Tool Die Tooling Lot of 3

VERSON PRESS BRAKE USED

Press Brakes.

2" wide opening 89 degree 36" 12 L Press Brake Lower upper Tooling Vee V Forming

SEE PHOTOS FOR CONDITION. I think these were used to bend heavy wire panels, grid.

75° Degree Acute 1" Wide Vee Press Brake Lower Tooling Punch V Die Forming 14

75° Degree 1" Wide.

Amada 20mm 88° One Touch V-Forming Press Brake Gooseneck Die Punch

Country of Manufacture: Australia. Unless otherwise specifically agreed to in writing by. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following.

Amada 45230 835mm 88° One Touch V-Forming Press Brake Die Punch R3.0 .120"

SKU: 274491 - Amada 45230 835mm 88° One Touch V-Forming Press Brake Die Punch R3.0 .120" - Amada - Used 45230 . -- Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. If your purchase requires a pallet, banding or any other form of packaging, a packaging fee may apply.

ACCURPRESS 7606 60 Ton x 6’ Hydraulic Press Brake # 8253

88” x 50” x 78”. Between Housings. Overall Length.

(2) Genuine Amada Single Slide Press Brake Quick Release Clamp Punch Holders

(2) Amada Single Slide Press Brake Quick Release Clamps Punch Holders. No. 901000. Used with a bit of surface rust

12" LONG x 89 degree PRESS BRAKE DIE metal bending fab shop tool

Approx 12" x 89 DEGREE. good used Press Brake Die. looks like 89 degrees. i could be wrong.

Press Brake Radius Top Punch 36" Long, 3-1/4" Diameter

(1x) 3-1/4" Diam. Radius Top Punch. Capacity: 12 Gauge Mild Steel. Length: 36”. Dies are not precision cut to length. Tongue Style: Standard Tooling Tongue (1/2 x 5/8”).

Used 36.5” Gooseneck Press Brake Die Tooling Blacksmith Tooling

36 1/2”gooseneck die see pics for measurements

brake press tooling, sheet metal forming gooseneck brake punch. 1/2'' tang

See pictures for condition and drawing for specs. 1/2" tang American style tooling.

Amada Hemming Tool 80149. An801492. 6h N801492 Hemming Die Brake V6/30 Degree

415mm long see pictures for details

350 TON X 14' CINCINNATI 350CB-12 HYDRAULIC PRESS BRAKE AUTOMEC 150 CNC 2-Axis

Cincinnati 350CB-12 Press Brake. 14’ X 350 Ton. Standard Stroke Length 10”. Motor 35 HP. Distance Between Housings 12’-6”. Length 12’. Overall Die Surface 14’.

PREMIER 425.2.E.R CNC Press Brake 25 Ton USED

PREMIER 425.2. E.R CNC Press Brake 25 Ton USED. E.R CNC press brake rated at 25 tons. Manufacturer: Premier Press Brake Sales & Service Model: 425.2. Press Brakes.

28.25" Acute 30* V 3/8" Lower Press Brake Die (1/2" tang)

2.38" Overall height.

Wilson Tool 44540XT-300MM 85° V-Forming Press Brake Gooseneck Die Punch .188"Ra

Country of Manufacture: United States. Unless otherwise specifically agreed to in writing by. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following.

3.7" L 90° V-Forming Press Brake Angle Die Punch 1/2" Tang 1" Thick 3.7"Tall

Country of Manufacture: United States. Unless otherwise specifically agreed to in writing by. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following.

44-3/4" Press Brake 90° Forming V Angle Die Block 1/2" Tang 2-3/8"H

SKU: 216858 - 44-3/4" Press Brake 90° Forming V Angle Die Block 1/2" Tang 2-3/8"H - N/A - Used . -- Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. If your purchase requires a pallet, banding or any other form of packaging, a packaging fee may apply.

12" set of offset brake press dies,.300" OFFSET step dies, sheet metal forming.

100s of brake dies available in my ebay store, all tooling is coated with a rust inhibitor so the pictures don't always show the actual quality until they are wiped clean at purchase. any questions please ask.

1.5" V OPENING RADIUS SET .750 Radius forming punch. 1/2'' tang .3/4" DIAMETER

See pictures for condition and drawing for specs. 1/2" tang American style tooling. 100's of other brake press listings available. all tooling is coated with a rust preventative. once that is wiped off most of this stuff cleans up nicely. Sometimes the pictures don't depict the quality because of the rust inhibitor.