Turning Tools

Armstrong/Atlas 5 Pc. Lathe Tool Holder Set 3/8 x 7/8" Shank No 0-R 0-L 0-S 30-L

Armstrong and Atlas 5 Pc. Lathe Tool Holder Set. 3/8 x 7/8" Shank. Armstrong part no. 0-R, 0-L, 0-S, and 30-L. 1 Atlas Right hand cut off tool. All in used condition. Square tool holders are all in good condition. The two cut off holders have some damage on the bottom lip where the tool seats.

Ingersoll Cutting Tools / TaeguTec Holder Boring Bar TTIR25.4-4C, 1.00", Used

It holds any 4mm grooving insert from Ingersoll in the T-CLAMP SERIES. It is made my Ingersoll/TaequeTec.

Lot Of 4 Indexable Boring Bars. Lathe Tooling. Indexable Boring Bars

See pictures for sizes and condition Loc. Red bucket

Lot Of 9 Lathe Turning Tools Indexable Carbide Valenite LTE-24,carboloy 1.5”x1.5

Lot of nine indexable turning tools 2 inch and a half square 3 inch and a quarter some 1 inch

Sandvik S06M STFCR-2 indexable boring bar 3/8" steel shaft 3" OAL

Sandvik S12S-SDUCR 2EX indexable boring bar 3/4" steel shaft 5" OAL

VDI 40 Trepan Face Grooving Tool Holder TPMR/TPG 322 323 324 Insert 40mm Shank

Used VDI 40 trepan / face grooving indexable tool holder. Currently fitted with Sumitomo TPMR 323 AC3000 insert. Good for CNC lathe VDI 40 turret face grooving, trepanning, plunge grooving, or special grooving applications.

Sandvik S08M SCLCL-2 indexable boring bar 1/2" steel shaft 6" OAL

Sandvik S06M STFCR-2 indexable boring bar 3/8" steel shaft 6" OAL

Sandvik S12S-SDUCR 2EX indexable boring bar 3/4" steel shaft 10" OAL

Sandvik A12S SDQCR3-R indexable boring bar 3/4" steel coolant thru shaft 5" OAL

Sandvik S06M SCLCR-2 indexable boring bar 3/8" steel shaft 6" OAL

Valenite 1" Shank A16T-SWLPL 3 Coolant Thru Boring Bar

Valenite 1" Shank A16T-SWLPL 3. Coolant Thru Boring Bar.

Lot Of 3 Carbide Tipped Boring Bars. 2@1/2” 1@3/4” Lathe Tool Boring Tools

Lot Of 3 Carbide Tipped Boring Bars. 2@1/2” 1@3/4” Lathe Tool Boring Tools. Condition is Used. Shipped with USPS Ground Advantage. Loc.d3

Valenite V-Cut VHL 619 24C 236 1-1/2" Indexable Grooving Tool Boring Bar 12" OAL

We are easy to work with and will rectify the issue quickly. Insert is 0.250" wide. Put this old bar to work. Bar is used in excellent working condition. If you've ground on, filed, sanded, polished, altered etc.

GENTLY USED DORIAN TOOL INDEXABLE BORING BAR S16T-MCLNR-4, 1" SHANK x 12" OAL

It features a multi-clamp system that provides rigid holding for standard CNMG inserts. Dorian Tool S16T-MCLNR-4 (MPN: 73310155010) is a. Key Specifications. Insert Compatibility : Accepts ANSI/ISO standardCNMG 43_ (specifically CNMG 432) 80° diamond inserts.

Kennametal MDJNR-164D 1" Indexable Lathe Tool Holder 5" OAL DNMG 432 Inserts

DNMG 432 Inserts. Uses DNMG 432 style inserts. Holder has been shortened to 5" OAL and needs a new shim seat. Holder is used in working condition.

Iscar 1" Dia. Threading Grooving Boring Bar GHAIR 25.4-20 GEPI Insert 1.0

Inserts Used : GEPI 2.5-MT0.05 & GEPI 2.5-WT0.05. Part Number : GHAIR 25.4-20.

Seco Snap-Tap 1" Shank Dia. Boring Bar CNR001008-16 16NR Inserts 1.0 CNC Tooling

Inserts Used : 16NR. Other Info: This is missing the clamp and the clamp screw. Clamp Kit : CSP16HD-T15P.

Kennametal E08SCLPR2 15.24mm .6 Solid Carbide Coolant Thru Boring Bar CP Inserts

Part Number : E08SCLPR2. Inserts Used : CPMT 21.51 and other CP inserts.6" 15.24mm.

Lot of 2 Borite 1/2" Shank Indexable Lathe Turning Tool Holders E-8 and AL-8

Holders are used in working condition. Uses a 3/8" IC triangle insert.

Dorian Tool Boring Bar Set DCMT-S-SDUCR-S 73310185068 Lathe Atlas South Bend

This listing is for a 3 piece boring bar set with inserts made by Dorian. They are in slightly if ever used condition in original packaging D1RC

Lot of 3 Shars SCLCR-3 indexable boring bars 1/2" 5/8" and 3/4"

I take a good number of photos so you can see the actual condition of the item you will receive.

Kennametal A24-MWLNR4 Indexable Boring Bar 1-1/2" Shank 8" OAL WNMG 432 Insert

1-1/2" Shank 8" OAL WNMG 432 Insert. Uses the WNMG 432 style inserts. Bar is coolant thru. It could use a little touch up under the insert corner. It's been cut to 8" OAL. Bar is used in working condition.

5 vintage Lathe Tools, turning, parting or cut-off. Williams, Armstrong, Suzuki

Two Armstrong USA No.2S; one Armstrong USA No.T2-L; one Williams USA No.2-S; one Toyko Suzuki No.33R (parting or cut-off tool holder). The pen appearing in the photo is for size reference. Tools listed here are useful on certain models of manual type lathes, applications not limited to Logan, South Bend, Atlas, Hardinge, Monarch, Myford, etc.

Sandvik T-MAX Q-CUT R151.21-16-50 indexable lathe turning/grooving toolholder

Valenite VDG-64S Indexable Lathe Part Off Blade Holder 32mm/1.260" Blade Size

Valenite VDG-64S Indexable Lathe Part Off Blade Holder. 32mm/1.260" Blade Size. Holder is used in working condition. Includes the lock screws. Mount block is 1" x 1". I believe this will hold most 32mm/1.260" tall blades.

Kennametal MTJNR-164D 1" Indexable Lathe Turning Tool Holder TNMG 432 Inserts

TNMG 432 Inserts. Holder is used in working condition.

Lot of 9 Carbide Tipped Boring Bars 3/4" 5/8" and 3/8" Micro 100, SPI

Micro 100, SPI. The four large bars in front are all 3/4". 3 of them are Micro 100 and 1 is SPI. The 3 in front of that bar are 5/8" and 3/4". The stubby 3/8" is an SPI. I believe the long one in the back is a Micro 100 as well.

A08M-SDUCR-2 Coolant Through Steel Boring Bar 1/2" Shank 5” Length Sandvik

The A08M-SDUCR-2 Coolant Through Steel Boring Bar by Sandvik is a high-quality turning tool designed for metalworking applications. This specific boring bar is made of steel with a 1/2" diameter shank, offering a length of 5 inches. Ideal for CNC machining and other industrial processes, this tool provides precision and efficiency in cutting and boring tasks. Sandvik is a reputable brand known for producing reliable and durable tools, making this boring bar a valuable addition to any workshop or manufacturing setting. Lot 58

SI CSKPL-40-6 Large 2.5" Indexable Square Insert Boring Bar 4819

SI CSKPL-40-6 Large 2.5" Indexable Square Insert Boring Bar 4819

Lot Of 5 Assorted Boring Bars.lathe Tooling Indexable Boring Bars

Lot of five random length see pictures for details, indexable boring bars. loc.red bucket

Lot of 2 Shars S-SCLCR6-2 indexable boring bars 3/8" shaft

I take a good number of photos so you can see the actual condition of the item you will receive.

Lot of 2 Shars SCLCR-3 indexable boring bars 1/2" and 5/8"

I take a good number of photos so you can see the actual condition of the item you will receive.

Sandvik S10R SDUCL 2 indexable boring bar 5/8" steel shaft 8" OAL

Sandvik S08S SDUCR-2 indexable boring bar 1/2" steel shaft 4" OAL

Manchester 218-126 Face Grooving & Threading Tool Holder Boring 510- 135 137 107

Inserts Used : 510-135, 510-137, 510-107.

Sandvik S06M SCLCR-2 indexable boring bars 3/8" steel shaft 6" OAL

I take a good number of photos so you can see the actual condition of the item you will receive.

ARBORTECH Ball Gouge 30 mm Spherical Shaped Wood Gouge Power Carving Attachment

Everything is listed in pictures.

FM Carbide Boring Bar #mtjnr24-3 1 1/2" x 8" CNC Machinist tool

The FM Carbide mtjnr24-3 1 1/2" x 8" boring bar is a high-quality turning tool used in metalworking. Made from durable steel material and Carbide inserts, this boring bar is precise and reliable for various machining applications. With a diameter of 1 1/2 inches and a length of 8 inches, this tool is designed to provide accurate and efficient cutting results in a range of industrial settings. Ideal for CNC machining and other metalworking processes, the FM Carbide boring bar is a valuable addition to any workshop or manufacturing facility.