Graphite
graphite — pre-owned
Browse 39 graphite — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
1/2x19 in. GRAPHITE ROUND PLATE PERFORATED DISK-electrode heat exchanger baffle
Graphite round plate/disk -- 1/2 in. thick -- perforated with 1/4 in. holes -- weighs app. -- mostly nice condition but a small chipped area along the edge of one side -- more or less lightly stained --.
EDM Graphite Block for Sinker Machine 6" x 7" x 2" 5 pounds Block #1
For security purposes, all of our parts are sealed and or marked so that they can be identified. This item is in good used condition, may show scuffs or dust from storage.
EDM Graphite Block for Sinker Machine 7.5" x 7" x 1.5" 6 pounds Block #2
For security purposes, all of our parts are sealed and or marked so that they can be identified.
3 ft. GRAPHITE ROUND ROD 2 1/8 in. thick 8+lbs - electrode grounding etc INGOT
3 ft. Graphite round rod -- 2.125 in. wide -- weighs app. -- mostly nice condition but one end is a bit rough for the last 6-8 in. with a chip at the end --.
3/4x19 in. GRAPHITE ROUND PLATE PERFORATED DISK-electrode heat exchanger baffle
Round Graphite plate/disk -- 3/4 in. thick -- perforated with 1 in. holes and has four 1/2 in. threaded holes at the 'corners' -- weighs app. 9 lbs.15 ozs.
Coarse Grain Graphite Block Approximately 3" x 6" x 11.5"
Medium Grain Graphite Block Approximately 1" x 2.25" x 7"
Picture(s) represents this item.
GRAPHITE GROUNDING ROD 2ft x 1 1/8 in. w Lead Wire electrode ground CARBON ARC
2 ft. Graphite electrode / grounding rod -- 1 1/8 in. wide -- pointed at the one end with a PVC cap on the other with an 18awg Belden lead wire rated 600V -- the wire is embedded in a clear acrylic like plug and fastened to the graphite rod --.
Medium Grain Graphite Block Approximately 1" x 1.25" x 5.5"
The size of the graphite is in the title.
Medium Grain Graphite Block Approximately 1" x 1.5 " x 6.5"
Pictures are intended to show you the texture of the graphite, not the size. The actual graphite will be the size in the title.
Graphite Anode Electrode Octagon 12”x2 3/4” 5lbs
3 ft. GRAPHITE ROUND ROD 2 1/4 in. thick 8+lbs - electrode grounding etc INGOT
3 ft. Graphite round rod -- 2.25 in. wide -- weighs app.
Graphite Milling Block Bulk Chunks High Density Carbon Odd Size 8.5lb
Cut from a billet. Should make a clean milling block. Pallet Racking. LET'S STAY IN TOUCH. Part Number N/A. x Width 13 in. x Height 2 in. If the item is listed with Flat Rate Freight.
You save $15.00
EDM Graphite Block for Sinker Machine 5.5" x 8.25" x 1.25" 6 pounds Block #3
For security purposes, all of our parts are sealed and or marked so that they can be identified.
Coarse Grain Graphite Block Approximately 2 5/8" x 6 1/2" x 13"
Coarse Grain Saw Cut with voids as shown in Picture(s).
Graphite Milling Block Bulk Chunks High Density Carbon 1250 Lbs.
Die Pressed Artificial Graphite Block with High Density High Purity Die Pressed Artificial Graphite Block. Pallet Racking. Various size pieces in the skid. LET'S STAY IN TOUCH. If the item is listed with Flat Rate Freight.
You save $570.00
Graphite Donut Ring High Density Fine Grain 2"-3" Dia X 0.22"-0.94" Thick 9 Pcs
Graphite Donut Ring High Density Fine Grain. Our goal is to solve all as quickly as possible.
Coarse Grain Graphite Block Approximately 1 3/8" x 2 7/8" x 6 3/8"
Picture(s) represents this item.
CARBON GRAPHITE BAR 18X1X1" BLACK 5,000°F-VACUUM/800°F-MAX-NORM 5,500PSI
18X1X1" 2 LBS. CARBON GRAPHITE BAR. MAX NON VACUUM TEMP 800°F. MAX TEMP IN A VACUUM 5,000°F. TOLERANCE- 0.00" TO 0.02".
Medium Grain Graphite Block Approximately 1" x 1.5" x 7.5"
Coarse Grain Graphite Block Approximately 1" x 2 7/8" x 6.5"
Medium Grain Graphite Block Approximately 1" x 4" x 4"
The size of the graphite is in the title.
Coarse Grain Graphite Block Approximately 1" x 3.5" x 6"
Coarse Grain Graphite Block Approximately 1" x 2.875" x 7.375"
Picture(s) represents this item.
Coarse Grain Graphite Block Approximately 1" x 3.25" x 6.5"
Picture(s) represents this item.
Coarse Grain Graphite Block Approximately 1" x 2.875" x 5.75"
GRAPHITE BLOCK PLATE SHEET BLANK SAWCUT 321807 8 X 6 X 1" REF. 36-00820
BLANK SAWCUT. GRAPHITE BLOCK321807. PLATE SHEET.
Coarse Grain Graphite Block Approximately 1" x 2.25" x 6.875"
Picture(s) represents this item.
Coarse Grain Graphite Block Approximately 1" x 2.875" x 7.125"
Coarse Grain Graphite Block Approximately 1" x 2.875" x 7.25"
Picture(s) represents this item.
Coarse Grain Graphite Block Approximately .625" x 2.875" x 5"
Picture(s) represents this item.
Coarse Grain Graphite Block Approximately 1" x 2.75" x 6.5"
Picture(s) represents this item.
Peek Round Rod 3" Diameter X 0.46" - 1.32" Long Various Length 9 Pieces
Peek Round Rod. Various Length. THE BUY IT NOW IS FOR 9 Pieces.
HARD GRAPHITE BLOCK 4”x8” 1 1/2”Thick
Cut on bandsaw hard graphite block- crisp edges.
GRAPHITE ANODE ELECTRODE BAR ROUND 2” OD X 40” LONG. PRE OWNED. 50 AVAILABLE
The product is a pre-owned graphite anode electrode bar with a 2-inch outer diameter and 40 inches in length. The item is a round rod designed for use in Plating, CNC machining, metalworking, and manufacturing processes. With 50 available, this high-quality graphite bar is suitable for various industrial applications requiring precision and efficiency in production.
Graphite Sheets and Rods Assortment, 36x14x3 in Industrial Sizes
The Graphite Sheets and Rods Assortment features industrial-sized graphite sheets measuring 36 inches in length, 14 inches in width, and 3 inches in thickness. This product is ideal for use in CNC, metalworking, and manufacturing industries, providing high-quality raw materials for various applications. The assortment of graphite sheets and rods offers versatility and convenience for businesses in need of reliable and durable graphite materials.
20 pieces of Graphite Flexible Foil 19.5" x .062" for High Temperature Gasket
High electrical conductivity is a natural property because of the graphite structure. The foil provides a consistent low resistance path between transistor and heatsink. This foil has been sanded and perforated on both sides.
Graphite Block 4 x 4 x 36 Inches Solid Nuclear Grade, some edge damage
Graphite High Density block. Originally intended for reactor at University, never used. some wear. will entertain offers. 1500.00 each
Pair of Perspex Acrylic Solid Design Architect Bookends 1980s
Paar Buchstützen Plexiglas Acryl massiv Design Architekt 1980er 1980s Original Paar zweier Buchstützen aus dicken Acryl- bzw. Paar zweier Buchstützen aus dicken Acryl- bzw. Paar Vasen Vase Design Cari Zalloni für Steuler Keramik OpArt blauschwarz XXL 30.
ORBIT TAPS FOR EDM GRAPHITE AND COPPER GRAPHITE POCO C3 lot of 76+ pcs
EDM Orbit taps made from copper graphite and graphite, POCO C3 large lot of at least 76 pcs. 31 in tubes. Surplus from an EDM shop estate