Metal & Alloy Channels
metal & alloy channels — pre-owned
Browse 21 metal & alloy channels — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
100mm or 3-15/16" Aluminum disc, point.252 thick
Here is an Aluminum disc. There is a dowel pin ?. extending from bottom of disc. Can be milled off if needed. Weighs just under 10 ounces. I'm calling this used.
You save $2.73
304 Stainless Steel Channel 12x12 Reclaimed 20lb 1/2" Leg 1/4 Back Make Offer
Material : 304 Stainless Steel.
Aluminum Industrial Metal Channel Alloy Profile
Aluminum Industrial Metal Channel Alloy Profile
Stainless Steel plate or bracket 10-3/4" x 2-7/8" x 1/2" thick
Here is a Stainless Steel plate or bracket. It's app 10-3/4" long x 2-7/8" wide x 1/2" thick. The larger hole is app 1-7/8" OD and the smaller hole is app 7/8". There is a ledge or step and the ledge is app point 220" thick.
You save $5.48
100mm or 4" OD Stainless disc, point 089 thick
Here is a Stainless Steel disc. It's 4" or app 101mm OD and point 089 thick. There is a small thru hole in center, app point 135 OD, big enough for a 6-32 screw to fit thru. Weighs just over 5 ounces.
You save $1.73
Stainless Steel plate, 5-3/4" x 4-3/8" x .190" thick
Here is a Stainless Steel plate or bracket. It's app 5-3/4" long x 4-3/8" wide x point 190" thick. Has a bunch of thru holes, with 4 of them being countersunk. And a small cutout along 1 edge. This is used.
You save $2.59
Anodized Aluminum disc, 2-1/2" OD x 1-1/2" tall
Here is a black Anodized Aluminum disc. Has a slight counterbore on top. Weighs app 11 ounces. This is used.
You save $3.01
Aluminum disc, 6-1/4" OD x 1/8" thick
Here is an Aluminum disc. There is a tapped hole in center, maybe 5/16-24 but not sure. A few small cutouts or indentations along the edge. I'm calling this used. A few minor scratches and blemishes from storage.
You save $2.27
Aluminum Channel, 6 pieces, 1/2" W x 3/4" tall x 1/8" wall thickness, 30" long
Aluminum channel, 1/2" wide x 3/4" tall x 1/8" wall thickness. 1/4" x 5/8" ID.
Stainless Steel disc 9-3/4" OD x point 235 thick
Here is a Stainless Steel disc. This is machined. Has 24 holes around edge, which are app 3/16" od. There are also 2 small cutouts at edge. There is a step or ledge on top. The ledge is point 275" thick.
You save $11.02
Stainless Steel disc, 8-3/4" OD x point 089" thick, hard coat anodized
Here is a Stainless Steel disc. It's 8-3/4" OD and point 089 thick. Looks to be hard coat anodized. There are 3 holes in center, app 1/4" OD. And a small cutout, app 1" square. This is new but calling used.
You save $5.50
Aluminum Rectangle Shaped Tubing with Channel Type Sides
Since the center portion looks like rectangle shaped tubing. These holes only go through one side of the aluminum rectangle shaped tubing. The center of these holes are 1" from the ends of the aluminum rectangle shaped tubing.
Aluminum Channel - 1.5" x 1.125" x 26"
Used Aluminum Channel. 5/16" Hex Head will fit in each side channel.
Aluminum Channel, panel stiffener, 6 pieces, 80/20 # 2424, 15-3/4" long
Clear anodized aluminum channel. These are panel stiffeners for 1/4" material.
Large plastic handle - Aluminum extrusion 8020 channel profile
8020 Extrusion. I also have a large quantity of 80/20 extrusion. This item is heavy duty 1530 ( 1.5" x 3") in various lengths. All the material is slightly used, hence it will have light scratches.
MURTFELDT SUNSTSTOF 421946 STRUT CHANNEL LENGTH 118" WIDTH 13/16" HEIGHT 13/16"
MURTFELDT SUNSTSTOF. LENGTH 118". STRUT SCHANNEL. CHANNEL ID 7/16". CHANNEL OD 13/16". WIDTH 13/16".
Stainless Steel tray or pan, 24" x 16" x 2" tall x .045 thick
Here is a Stainless Steel tray or pan. A few scratches and dings from previous use. Unsure of type of Stainless. Non magnetic. This is local pick up only.
You save $5.74
Aluminum C-Channel 4" x 1-3/4" x 5/16" Thickness
This is for only (one) piece of Aluminum C-Channel - 4" wide x 1-3/4" tall x5/16" Thickness. I have five pieces of these channel four are 20' 7-5/8" (247- 5/8") Long and one is 14-7-3/8" (175-3/8") Long.
You save $36.00
ALUMINIUM ARCHITECTURAL EXTRUDED PIECES
FOR SALE - 1 PIECE OF EXTRUDED ALUMINUM. ITEM IS LOCATED MINUTES FROM DETROIT, MI.
Galvanized Channel Iron (9" x 14' pieces)
9" x 14' Galvanized Channel Iron.
10" WIDE X 25' 6" LONG STEEL CHANNEL IRON BEAM
USED 10" STEEL CHANNEL BEAM. ABOUT 25' 6" LONG. HAS LIGHT SURFACE RUST AND PITTING BUT I THINK IT IS STILL USEABLE.