Plastic Round Rods
plastic round rods — pre-owned
Browse 68 plastic round rods — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
Acetal Round Stock. 4 cylinders. Machinable Engineering Plastic, like Delrin.
4-pieces white machinable plastic cylinders. The top and bottom are factory finish, while the sides show machine marks from milling. Height: 2.1875” (55.5mm).
Nylon 6 oil filled Cast Round Rod Green 3"OD x 12 Inch Green
Discover the robust performance of this natural cast nylon rod with oil, a versatile material engineered for demanding applications. The rich green hue adds a distinctive aesthetic to its functional design.
Polyetheretherkeytone Thermoplastic Pieces As Pictured Bulk Lot Wholesale
Polyetheretherkeytone Thermoplastic Pieces As Pictured Bulk Lot Wholesale . Condition is Used. Shipped with FedEx 2Day.
You save $18.58
4 x 34in Acrylic Rod Round Bar for DIY Model Crafts Etc.
34inches of 4inch acrylic rod, good for crafts, diy, turning, etc. This was purchased second hand, it has minimal scratches easy enough to polish out. feel free to make an offer.
Acetal Round Stock. 8 cylinders. Machinable Engineering Plastic, like Delrin.
8-pieces white machinable plastic cylinders. Height: 2.1875” (55.5mm).
Acetal Round Stock. 12 cylinders. Machinable Engineering Plastic, like Delrin.
12-pieces white machinable plastic cylinders. Height: 2.1875” (55.5mm).
Acetal disc, 8-3/4 OD x 3/4 inch thick
Here is an Acetal disc. It's app 8-3/4" OD and just over 3/4" or point 768" thick. This is new but calling used. A few minor blemishes from storage.
You save $5.56
Ultem PEI cutoffs. 10 Piece Lot
left over Ultem Rod pieces.
Ultem PEI Rod 1000-1000 Natural 1.25" Diameter Rod x 9 Inch Long
Ultem PEI Rod 1000-1000 Natural 1.25" Diameter Rod x 9 Inch Long
rulon 488 rod 1.062" diameter with +/- .01 on diameter
Rulon 488 rod cnc plastic materials.
1.750 (1-3/4 inch) & 1-3/8” x 12 inches, Acetal Plastic Round Rod, Black. 2 Pcs
Uneven cuts but no shorter than 12”. See photos for details. I’ve had these sitting in shop for 8 yrs. Not sure total age
Ultem PEI 1000 Natural Rod. 2.5" Diameter and at least 4.875 long
This auction is for one piece. These are some Ultem 1000 drops from an old project. These pieces are 4.875 or slightly longer. Some have about a .375" Ø hole on one end only about .375 deep. and we will combine shipping as best as we can. Only actual shipping charges will apply. We can only ship in the US.
Sustarin C Acetal Plastic Machining Rod 2 2 1/4” Black Rounds Cut Offs Delrin
APPROXIMATELY 26 pieces of two diameters (2” AND 2 1/4”) in lengths of about 2” - 2.5” and black in color. This is a lot of cutoffs that I bought for a project and I am selling the rest. I keep about 20 pieces and selling about half the lot I bought. I have plenty and don’t need this lot any longer. About 12 lbs of plastic material. Name brand, good stuff. Good for lathe work, hobbies, crafts. You can make those Corvette lifting picks with these (not what I used the for but an idea). Or throw them at the neighbors (don’t do that).
HDPE PLASTIC solid rod 3” & 2-5/8” dia. 6 pcs, 21-7/8” total length
The HDPE Plastic Rod is a high-quality, durable product made from white HDPE plastic, there are 6 pieces in this lot. Four are 3” diameter rod in following lengths: 3-3/4” long, 3” long, 2-5/8” long and 2-1/2” long. One piece has been turned to just under 3” diameter and is 5” long. The 2-5/8” diameter piece is 5” long. For a total combined length of just under 22”. (All pieces +/-1/16”)Manufactured in the United States, this rod is perfect for various industrial applications requiring a sturdy and reliable material. Its smooth finish and consistent dimensions make it ideal for use in CNC machining, metalworking, and other manufacturing processes.
Polyetheretherkeytone Thermoplastic Pieces As Pictured Bulk Lot Wholesale
Polyetheretherkeytone Thermoplastic Pieces As Pictured Bulk Lot Wholesale . Condition is Used. Shipped with FedEx 2Day.
You save $18.58
1.250" diameter PPS rod natural, 3 pieces, two 9-3/4" long, one 9" long
rulon 488 Rod 1.062 Diameter with+/- .01 Tolerance Cnc Plastic Materials
rulon 488 Rod Cnc Plastic Materials. rod were grinded to 1.062" diameter Length 10.50” Color steel gray Used some rod might scratch on the outside on the surface
White Nylon Delrin Plastic Bar Stock Lot of 1
PEEK Tube Polyetheretherketone Plastic Cylinder 6.5 L x 1.375" ID x 2.75" OD +
Sold as a bundle.
PEEK, ROD, UNFILLED, NATURAL, ~1.8" O.D. X ~5.8" LONG
PEEK, ROD, UNFILLED, NATURAL, ~ 1.8" O.D. X ~ 5.8" LONG. These are what is left from a trepanning operation on a lathe where the original form was a 2.5" Rod. Bushings were made and this is the remaining core. They are near 6" long and ~ 1.8" O.D. There are a couple OD's in the batch. ~ 1.8 . They all are about 5.8' - 6.0" The brand is TECAPEEK. No certs. They have been stored in a controlled environment away from sunlight. The ends are faced and may have a step or bandsaw finish. Pretty good deal considering the cost of PEEK has been increasing monthly.
Lot Of G10 Material For Knife, Machine, Or Hobby
Lot of varying sizes of G10 material. As seen in photos. Some square and rectangle and rounds most prices are at least 1" thick.
Oil Filled Nylon tubing And Blocks various lengths lot of 10 Pieces, Green
Oil Filled Nylon tubing And Blocks various lengths lot of 10 Pieces, Green
4" X 3" Virgin PTFE Teflon Round Rod.
Was leftover from a job. 4in diameter by a little over 3 in tall. Has 3 marks from being chucked in a lathe.
Graphite Round Rod 4-3/4" Diameter by 4" Long Cylinder Bar
Up for your consideration is this graphite round rod. It is conductive. Weight is about 4.28 lbs.
Polyetheretherkeytone Thermoplastic Pieces As Pictured Bulk Lot Wholesale
Polyetheretherkeytone Thermoplastic Pieces As Pictured Bulk Lot Wholesale . Condition is Used. Shipped with FedEx 2Day.
You save $16.35
Plastic Block for Milling, 901 Rod 6.25"X11"
Quadrant Engineering Plastic Products 901 Rod 6.25"X11". Blue in color.
rulon 488 Rod 1.062 Diameter With +-.01 Tolerance Cnc Plastic Materials
Rulon 488 Rod Cnc Plastic Materials.
peek plastic victrex 450g 3” diameter cnc machining raw material Lathe bulk disc
ECTFE plastic round stock aka Halar, 4” dia. , 5” long
ECTFE round plastic rod also known as halar plastic. 4” in diameter(+1/16”), one piece 5” long.
ECTFE plastic round stock aka Halar, 3" diameter , 5-3/4" long.
ECTFE round plastic rod also known as halal plastic. It is 3” in diameter(+1/16”) and is 5-3/4” long. Has a small knock in diameter visible in picture
UNIVERSAL PARTS CARRIER: PTFE TEFLON side piece kit; LENS or WORK HOLDER rod
It is only for the PTFE knobbed side pieces as shown. Use 3 of these, screwed onto stainless end plates - one at the bottom (or possibly offset from the bottom) and 2 for the sides. One can also be used on top to weigh down and help position the loaded work.
ECTFE plastic round stock aka Halar, 4” dia. , two pieces 1-5/8” long each
ECTFE round plastic rod also known as halar plastic. 4” in diameter(+1/16”), two pieces both are 1-5/8” long(+1/16”).
1.00” DIA. X 12” LG CELAZOLE PBI POLYBENZIMIDAZOLE ROD
These characteristics make this material very attractive to semiconductor manufacturers for vacuum chamber applications. U-60 is commonly molded and machined into precision parts for industrial, chemical and petrochemical industries; aerospace; glass making; liquid crystal display (LCD) panel manufacture; and photovoltaic (PV) panel manufacture.
White Nylon Delrin Plastic Bar Stock Lot of 1
White Nylon Delrin Plastic Bar Stock Lot of 2
OD 7" x ID 5.35" x 9" Long.
Plastic Rod Lathe turning stock 30 pc's Ø.823" X 1-1/2" Long SJ-20 IGUS IGLIDE
These are ready to be machined into bushings or whatever you want.
Telsonic Ultrasonics TE-35-44029-2 Sonotrode, K14204, Head Diameter .512" - USED
These services include Item is sold as pictured.
4 pcs Large Nylon Round Threaded Stanoff Spacers - 1.75 dia. x 2-1/2" long
4 pcs Large Nylon Round Threaded Stanoff Spacers - 1.75 dia. One end is threaded for 5/16-18 Screw size. Other end is blank, but could be threaded as well. Ideal for many projects requiring standoff mounting or spacing.
ECTFE plastic round stock aka Halar, 2-1/2” diameter , 2-1/4” long
ECTFE round plastic rod also known as halar plastic. It is 2-1/2” in diameter(+1/16”) and is 2-1/4” long. Has lathe jaw marks on diameter visible in picture
Lot Of 4 - Bayer Makrolon Extruded Polycarbonate Sheet, 22-3/4x16-1/4x3/8" Clear
Small holes on 3 of the ends on each panel, refer to pictures. These services include Item is sold as pictured.