Table Saws
table saws — pre-owned
Browse 242 table saws — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
VINTAGE CRAFTSMAN 113.29990 TABLE SAW "100" THROAT PLATES DADO MOLDING STANDARD
USED, THROAT PLATES. LOOK AT THE PICTURES.
Delta Unisaw Woodworking Table Saw 10 in Blade Electric Manual Control
Delta Unisaw Woodworking Table Saw 10 in Blade Electric Manual Control
Tops Retracto-Glide Radial/Table Saw 3 H.P. 460/240 V Working Condition
The Tops Retracto-Glide Radial/Table Saw is a powerful 3 horsepower corded electric tool designed for precision cutting in various woodworking projects. With a blade location centered and voltage range of 230-460, this model offers reliable performance for professionals and DIY enthusiasts alike. The Retracto-Glide feature ensures smooth and accurate cuts, making it a versatile and reliable addition to any workshop or tool collection. Returns are accepted for worrie free purchasing Shipping is easy. We will help to get shipping arranged and at the best price with the best service.
Ridged Table Saw with Stand And Herc-U-Lift Mover
The Ridgid R4511 Table Saw with Stand and Herc-U-Lift Mover is a powerful and versatile tool for woodworking and DIY projects. With a 10-inch blade diameter, it can handle a wide range of cutting tasks with ease. The stand provides stability and support for the table saw. The Herc-U-Lift Mover allows for moving it around shop. Fence can go 30” right side of blade and 18” left. Tilt DOSE NOT work. I have been using this way. Granite top is 40 1/4 x27x 1 3/4. Saw is heavy. Run on 110 current, wired with on- off bump off switch. Fence locks down tight, miter glides easily in slots. Fence has adjustable plastic alignment guides for adjustment for blade width.Some rust from setting in shed.
VINTAGE CRAFTSMAN 113.29990 TABLE SAW "100" BLADE GUARD ASSEMBLY W/ MOUNT
USED, DUSTY, BLADE GUARD ASSEMBLY. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES.
Old Vintage Powermatic Shaft Handle Locking Pin PM27 Shaper or 66 Table Saw
VINTAGE CRAFTSMAN 113.29990 TABLE SAW "100" MOTOR MOUNT ASSEMBLY
USED, DUSTY, MOTOR MOUNT ASSEMBLY. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES.
6" Metal Cutting Table Saw 16" x 15" Top 115/20-230V Tested
Size: Length: 25 in. Width: 19 in. Height: 23 in. Needs a new motor pulley and belt. Belt-driven motor assembly. Prefer to pick it up yourself?. Tested and works as it should. Table surface exhibits rust and oxidation.
VINTAGE CRAFTSMAN 113.29990 TABLE SAW "100" ARBOR NUT AND FLANGE
LOOK AT THE PICTURES.
SawStop TGI2-060 52 Front Rail for Industrial Series II ICS Models (84.25"" OAL)
SKU: 248670 - SawStop TGI2-060 52 Front Rail for Industrial Series II ICS Models (84.25"" OAL)" - SawStop - Used TGI2-060 . -- Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. If your purchase requires a pallet, banding or any other form of packaging, a packaging fee may apply.
You save $16.35
Miniature Table Saw 4” Mighty Mite Chicago Electric B4
The Miniature Table Saw 4” Mighty Mite Chicago Electric B4 is a compact and portable tool perfect for woodworking projects. With a blade diameter of 4 inches and powered by electricity, this table saw is designed for precision cutting in various materials. Made in the United States, this product is ideal for hobbyists and small businesses looking for a reliable and efficient tool for their workshop. Its compact size makes it easy to maneuver and store, making it a versatile addition to any woodworking setup.
FREUD STACKED DADO BLADE W/CARBIDE TEETH 8" MODEL DS308 POSSIBLE NEW; ITALY
THE ARBOR BORE IS 5/8. LOOK AT THE PICTURES.
Powermatic Model 66 Table Saw 3 Phase Pickup or Ship
Experience precision cutting with the Powermatic Model 66 Table Saw, a robust addition to any woodworking arsenal. Make the Powermatic Model 66 the center of your crafting universe.
Rockwell 34-58 Table Saw Manual Control Electric Woodworking Power Tool
Rockwell 34-58 Table Saw Manual Control Electric Woodworking Power Tool
TAPCO PRO TRAX MULTI ANGLE SAW TABLE FOR LOCAL PICKUP ONLY
Evansville, IN 477113. 1432 N Fares Ave.
Shop Roll Up Door
The Shop Roll Up Door is a crucial component for woodworking, metalworking, and manufacturing businesses. This door provides easy access to the workspace while securely storing materials and equipment when not in use. With its durable construction and convenient roll-up design, it offers a practical solution for businesses looking to efficiently manage their operations.
VINTAGE CRAFTSMAN ROTO-VISE MOLDING HEAD FOR TABLE SAW WITH PACKAGING
USED, CRAFTSMAN MOLDING HEAD. EACH KNIFE PROFILE HAS 3 KNIVES. LOOK AT THE PICTURES.. .
Vintage Table Saw Miter Gage
Bar is 13" total length, 3/4" wide, 5/16" thick.
DELTA Rockwell UNISAW Original Switch Cover Plate Manufacturing Tablesaw Vintage
I only have this one available.
Vtg CRAFTSMAN Cast Iron (9-2275) Floating Motor Rail~ w/Mounting Screws & Bolts
The original four standard head screws, two mounting bolts with washers and square nuts are included. Center / yoke is 6" long, and the total length is 9-1/2".
Delta Rockwell Bullet Motor, 1 HP 115/230v 1725 RPM Single Phase
We are happy to help!
Delta 34-761 Unisaw Table Saw 10" Tilting Arbor 3Ph 3 HP 240/480V 57" Fence
Fence is setup for 57". Pallet Racking. x Width 40 in. x Height 40 in. We are dedicated to understanding the unique challenges and opportunities that each industry faces. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Vintage Delta Unisaw Elevation Shaft Lock Collar LTA-459
Vintage Delta Unisaw Elevation Shaft Lock Collar LTA-459
SawStop TGI2-062 52 Rear Rail for Industrial Series II ICS Models (80.5"" OAL)"
SKU: 248664 - SawStop TGI2-062 52 Rear Rail for Industrial Series II ICS Models (80.5"" OAL)" - SawStop - Used TGI2-062 . -- Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. If your purchase requires a pallet, banding or any other form of packaging, a packaging fee may apply.
You save $14.93
VINTAGE CRAFTSMAN POWER TOOLS TABLE SAW MITER GAGE, 3/4" X 5/16" GUIDE
EVERYTHING MOVES AND ADJUSTS FINE. CLEAN AND VERY GOOD CONDITION.
Shopsmith Mark V 500 Lower Blade Guard Assembly Gray Plastic 2 Piece Set
It includes the main guard body with integrated mounting hardware and the removable top cover plate. Part Type: Lower Blade Guard. Function: Safety Guard / Dust Collection.
SawStop TGI2-061 52 Main Tube for Industrial Series II ICS Models (89.25"" OAL)"
SKU: 248672 - SawStop TGI2-061 52 Main Tube for Industrial Series II ICS Models (89.25"" OAL)" - SawStop - Used TGI2-061 . -- Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. If your purchase requires a pallet, banding or any other form of packaging, a packaging fee may apply.
You save $22.54
Miter Table Saw Gauge 10” Sturdy
The product is a sturdy 10" miter table saw gauge designed for woodworking equipment. It is specifically made for precise cutting and measuring tasks in the woodworking industry. With its durable construction and accurate measurements, this table saw gauge is a reliable tool for professionals and DIY enthusiasts alike. There are no markings on this tool to designate manufacturer. It appears to be a well made tool that would get the job done. Please see all photos
You save $3.00
Oliver 270D 14-16” Table Saw
A Teca VFD powers the 3 phase motor on 220 single phase. There are two rip fences included a J-style fence and a Bar fence with an Oak face and anti kick back rollers. The saw weighs around 1400lbs.
SCMI Model SL16WA Industrial Woodworking Table Saw Manual
SCMI Mod.SL16WA Sliding Table Saw S/N: AB14755 Specifications * 9800 RPM Scorer Blade Speed * 3200/4500/600 RPM Saw Blade Speed * 90-45 Degree Saw Blade Tilting * 125.98" Max Squaring Length with Scorer * 133.85" Rolling Table Stroke * 15.7" Max Saw Blade Diameter * 4.7" Scorer Blade Diameter * 5.5HP Saw Unit Motor * 1HP Scorer Unit Motor * 230VAC - 3 Phase - 60Hz
Unknown Table Saw Blade Guard w/ Anti Kick & Splitter for 10" Blade (6040)
The Unknown Table Saw Blade Guard with Anti Kick and Splitter is designed specifically for a 10" blade, providing additional safety and protection during woodworking projects. The unit quantity is one, making it a crucial component for ensuring the integrity and accuracy of cuts while working with wood. This blade guard is essential for professionals and hobbyists alike who value precision and safety in their work with table saws.
Powermatic Model 66 Table Saw 10" Tilting Arbor 3Ph 5Hp with Biesemeyer fense "
This Powermatic Model 66 Table Saw is a top-of-the-line tool for any woodworking enthusiast or professional wood worker.
Oliver Older Table Saw Brake Parts from a 260 marked 260 59_1
Oliver Older Table Saw Brake Parts from a 260 marked 260 59_1 buyer gets both brake parts pictured.
Oliver Older Table Saw Brake Part from a 270 marked 270 66
Oliver Older Table Saw Brake Part from a 270 marked 270 66
VINTAGE SEARS CRAFTSMAN UNIVERSAL JIG TENON FIXTURE FOR TABLE SAW W/ BOX
IT FITS IN THE 3/4 MITER GAUGE SLOT. NO CRACKS OR REPAIRS. LOOK AT THE PICTURES.
OLDER ALL METAL MITER GAUGE GAGE
LOOK AT THE PICTURES. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. NO WARRANTIES GIVEN OR IMPLIED.
Delta 34-807 10" Tilting (*) Arbor Table Saw 208/230-460V 3Ph Modified See Info
It will work as is with one blade as a rip table saw, without the ability to tilt. Blades would sit approx. Will there be a dock or forklift. Prefer to pick it up yourself?. Size: Length: 38 in. Width: 36 in.
You save $170.15
PILE OF OLDER CRAFTSMAN HOLD DOWN FINGERS ASSEMBLIES WOODWORKING TOOLING
USED, HOLD DOWN ASSEMBLIES. THERE ARE SCUFFS, SCRATCHES, RUST AND WEAR FROM USE. LOOK AT THE PICTURES.
Ryobi Table Saw BTS15
Ryobi Table Saw BTS15. Condition is Used. Local pickup only.
RYOBI 10" TABLE SAW BTS10 115V AC 13 AMPS 4800 RPM
10" TABLE SAW. Approximate weight: 50 lbs.