Spiral Router Bits

Infinity Tools 1/2" Shank Flush Trim Bit - 2" Cutting Length SKU: 85-821

2" Cutting Length.

LMT Onsrud 60-278 Solid Carbide Router, 3 Flute, Down Cut Low Helix Shk Dia .75”

Its downcut design allows for efficient chip removal, while the low helix provides a clean and quiet cutting experience. Designed for perfect balance and ultra smooth finish over a wide speed range.

Morse-Union-Unbranded Router Carbide End Mills 1 Lot 7 pc IN3129

IN3129 Union HSG - 2 Spiral Flutes - Size 1/2" - Shank 3/8" - OAL 2 1/2". IN3138 Morse USA No. 5921 - 4 Spiral Flutes - Size. 380" - Shank 3/8" - OAL 2 1/2".

ONSRUD 37-63 1" CARBIDE TIPPED V BOTTOM ROUTER BIT

SHANK: 1/2". WEIGHT: 1LB. MODEL: 37-63.

Misenheimer 410-1000, Three Flute Down Router Bit 3/8" CD x 1" CL x 3/8" Regrind

Size: 3/8" CD x 1" CL x 3/8" Shank x 3" OAL.

1/4" (.2500") CARBIDE END MILL ROUTER SINGLE O FLUTE FOR PLASTIC ONSRUD 63-775

1/4" (.2500") CARBIDE END MILL ROUTER SINGLE O FLUTE FOR PLASTIC ONSRUD 63-775. Condition is Used. Shipped with USPS Ground Advantage.

5 R&B Tool KRB.500-2 Double Edge Compression Spiral Bundle lot

Lot of 5 as pictured.

ONSRUD 7 PC SOLID CARBIDE ROUTER BITS 3/4 5/8 SHANK END MILLS CNC REGRIND READY

These are high-performance industrial tools, not cheap imports. (1) Onsrud 60-198: 3/4" Shank, Compression. (2) Onsrud 60-186C: 5/8" Shank, Compression/Chipbreaker. (2) Onsrud 60-186: 5/8" Shank, Compression.

DIAMOND PCD ROUTER .725" D X 1" CL X 3-1/4" OAL 2+2 COMP , See all my PCD Tools

63-768 Onsrud Router bit For Cutting Soft Plastic & Solid surface

5 Pc - Onsrud Carbide Bits, Number 63-712 - LOT of 5 Bits, Used Still Sharp

5 Pc - Onsrud Carbide Bits, Number 63-712 - LOT of 5 Bits, Used Still Sharp. All are used but in very good condition with no broken tips. Pictures might show some shading and reflections on the surfaces but its just the shadows and lighting, all bits look good and not discolored. See the pictures in the listing.

Lot Of 2 ..LMT ONSRUD 60-254. Solid Carbide 3 Flute Low Helix Downcut Router Bit

Gently used...no chips.

Handyman Club of America Toughest 25 Piece Router Bits Set

Whether you're a seasoned pro or just starting out, these bits will help you tackle a wide range of projects with ease. Imagine creating beautiful edges, intricate designs, and flawless grooves – all with one comprehensive set.

Onsrud-60-245 Three Flute Solid Carbide CNC Upcut For Wood And Plastic

The Onsrud 60-245 router bit is used for cutting Hard Plastic , Hard Wood , MDF , Soft Wood , Solid Surface. It has a cutting diameter of 3/8", a cut length of 1.125" and a shank diameter of 3/8". The bit has a UNC coating and is made of CARBIDE. The 60-245 has 3 flutes

LMT ONSRUD 60-169mw Solid Carbide 2 FLUTE Router Bit. Gently Used.

Gently used....still nice and sharp with no chips

ONSRUD 60-163MW Solid Carbide Bit,1/2" 2 Flute Compression

This ONSRUD 60-163MW solid router bit with a 1/2 inch diameter and spiral flute type is a great addition to any woodworking enthusiast's collection. The bit has been re-sharpened by the seller and is in top-notch working condition. The brand ONSRUD is well-known for producing high-quality woodworking tools and this router bit is no exception. The compression spiral design of this bit ensures a smooth and clean cut, making it perfect for a variety of woodworking projects. Whether you're a professional woodworker or a DIY enthusiast, this router bit is sure to meet your needs. The categories this item falls under are Business & Industrial, CNC, Metalworking & Manufacturing, Woodworking Supplies, and Router Bits, specifically spiral router bits.

Lot Of 4 LMT ONSRUD 60-008 Router Bits. .50" X 4" 3 FLUTE SPIRAL Serated.

One looks new....other 3 have been used... no chips.

Lot of 19 used CNC Router Bits (LMT Belin 6mm+3mm Up/Downcut)

6mm Downcut (2). 3mm Downcut (8). List of Bits 3mm Upcut (4). 3mm Upcut for Neobond/Dibond.

ONSRUD Cutter LP 63-725

I am not an expert in any particular item that I have listed. Because this item is used it is sold " AS IS " with no warranty. In my own opinion it is in good condition with signs of use.

LMT Onsrud 63-775 Upcut Solid carbide Router Bit

These tools have been resharpened by Onsrud and are still in their protective wax. New cutting diameters for offsets are as follows: .244” .238” .236” .240” Solid Carbide tooling with a single upward spiral flute. These tools give a high quality cut finish and are especially effective for machining soft plastics where they will produce a smooth and consistent finish. The upward spiral flute geometry provides excellent swarf clearance. Cut Diameter: 1/4" Shank: 1/4" Cut Length: 3/4" Overall Length: 2 1/2" Flute Type: Upcut

Diamond PCD Turbo Compression bit 3 wing 21.6 mm x70mm x 25mm L/C LH rotation

Diamond (PCD) tip for plunge cutting. Sturdy tool body with 3 helically positioned wings. Suitable for ramp plunge cutting operations. Reduce feed rate for severing operations.

BOSCH 1/4" SOLID CARBIDE DOWNCUT SPIRAL ROUTER BIT 85903M

MPN: 85903M. BIT STYLE: DOWNCUT SPIRAL. SHANK: 1/4".

Outside Profile CNC Router Bits

Outside Profile CNC Router Bits. Condition is Used. All of the Cutters are fresh from the sharpener. The bare tool is an example from another lot. 3/4” Shank 1 1/2” wide 4” tall.

3 Outside Profile CNC Router Bits

3 Outside Profile CNC Router Bits. Condition is Used. 3/4” Shank 1 1/2” wide 4” tall.

ONSRUD 48-076 1/2" CARBIDE TIPPED 2 FLUTE ROUTER BIT

FLUTE TYPE: STRAIGHT V. SHANK DIA: 1/2". WEIGHT: 1LB. OAL: 2 3/4".

Onsrud 81-252 Router Bit 1/2”

Onsrud 81-252 Router Bit 1/2”. Condition is "Used". Shipped with USPS First Class. Estate auction, not an expert on the tools, however this piece appears to be in excellent condition! I was unable to find the bit on onsruds website, perhaps it’s a discontinued bit. Check my seller page for more great items! Thanks!