Drill Bit Adapters & Holders

BROWN & SHARPE DRILL & REAMER TOOL HOLDER - 711-65-100

I show all available to give an honest representation of them. Made in the U.S.A. by Brown & Sharpe. Shank Length: 1-1/8".

Somma VFDH0 Adjustable Floating Drill Holder 3/4" to 1" V Type

For security purposes, all of our parts are sealed and or marked so that they can be identified.

Somma VFDH0-2 Adjustable Floating Drill Holder V Type

Used, in good condition. For security purposes, all of our parts are sealed and or marked so that they can be identified.

6pc COLLIS MORSE TAPER Drill Sleeve Adapter 1MT, 2MT SHANK

6pc COLLIS MORSE TAPER Drill Sleeve Adapter 1MT, 2MT SHANK Additional sizes listed and available.

MT#3 I.D. MT#5 Morse Taper #5 Adapter Extension Sleeve Tool Holder MT 5 MT 3

Morse Taper Size : Morse Taper #5. Tooling Side : Morse Taper #3.

1" ID R8 Shank Adapter Extension Sleeve Tool Holder 1.0

LOT OF VARIOUS TURRET TOOL HOLDERS

This is a used Lot of Various Turret Tool Holders in good condition. -Ref 19-98.

HARDINGE FLOATING DRILL & REAMER TOOL HOLDER - 00-D - 5/8" shank

Made in the U.S.A. by Hardinge. Shank: 5/8". Tool Capacity: 1/2".

BROWN & SHARPE DRILL & REAMER TOOL HOLDER - 711-65-100

Made in the U.S.A. by Brown & Sharpe. Capacity: 1/2".

AMEC 20631-1500 & A1.125 1-1/4" Coolant Feeding Spade Drill Holders W/ Inserts

BROOKFIELD FLOATING DRILL & REAMER TOOL HOLDER FACE PLATE - DA-10

Made in the U.S.A. by Brookfield. Just clamp the tool - float to center -and tighten. Overall Length: 2-1/4". Capacity: 1/64" to 1/2".

ERICKSON STRAIGHT SHANK SPADE DRILL ADAPTOR HOLDER COOLANT FED # 115

ERICKSON STRAIGHT SHANK SPADE DRILL ADAPTOR HOLDER COOLANT FED # 115

BROWN & SHARPE NON-RELEASING TAP HOLDER - 00FA-1

Made in the U.S.A. by Brown & Sharpe. This is a used Non-Releasing Tap Holder in GREAT condition. Shank Length: 2-1/4".

7/8" ID R8 Shank Adapter Extension Sleeve Tool Holder .875

It has 2 set screws.

SOMMA VFDH0 "V" TYPE ADJUSTABLE FLOATING DRILL HOLDER 3/4" SHANK 1/16-3/4" Cap

Up for sale is a Somma VFDH0 "V" type adjustable floating drill holder with a 3/4" shank. It has a 1/16-3/4" Capacity. No gouges, knicks, rust or engravings. Works as it should.

5MT Greenleaf Indexable Shell Mill 4” Cut 4 FL Love joy Holder

5mt

BROWN & SHARPE DRILL & REAMER TOOL HOLDER - 711-65-210

Made in the U.S.A. by Brown & Sharpe. Head Length: 1-1/2".

ACME 20531-1250 C-100-135 SPADE DRILL HOLDER ADAPTOR COOLANT SS # 126

ACME 20531-1250 C-100-135 SPADE DRILL HOLDER ADAPTOR COOLANT SS # 126

.472" KM40-KUB 12-58 Indexable Drill Body Kennametal KM40 M787383

KM40 Modular Connection.

Jacobs JKP-100-J33 0-10mm Keyless Drill Chuck Adapter Tool Holder 1/2" J33 Shank

Drill chuck teeth are in excellent condition with minimal wear. Drill chuck turns easily by hand.

Brown & Sharpe 175-400 / 200 Adjustable Knee Square Bit Holder 5/8" Shank

Reversible bit clamp allows left or right turning of shoulders, grooves or honing. Good useable condition as shown, good threads, no major issues. No bit installed. Drill bit holding capability (Screw for that is missing).

Jacobs 11N 0-3/8" 0-10mm Capacity Drill Chuck Adapter Tool Holder 5/8" Shank Dia

Part Number : 11N. The drill chuck opens and closes easily by hand.

1 3/8" Auto Shank "C" 68742 MT2 ID Morse Taper #2 Adjustable Adapter Tool Holder

KUTMORE HOLLOW MILL - 1/2" shank

Made in the U.S.A. by Kutmore. This is a used Hollow Mill in GREAT condition. Shank: 1/2" straight. Model #: 124 (I don't see this model online, but seems to be what's stamped on the body. Could be wrong since I'm not all that familiar with these).

ETM MT#4 I.D. Morse Taper #5 O.D. Adapter 12" OAL Extension Sleeve Tool Holder

Morse Taper Size : MT5.

0-1/4" Cap. 1/2" Shank JT1 Arbor Keyless Drill Chuck Adapter Tool Holder

0-1/4" Cap.

Weldon 1/2" ID 1" Shank End Mill Adapter ExtensionMMH-3 Tool Holder .5 1.0

Part Number : MMH-3.

Used Lg One Inch Square HSS Steel Lathe Bit Turning Blank CC 1" Sq By 5" long

It has a chip on the corner of the unused end.

5MT Kennametal KSSISR500SD530M6 Indexable Shell Mill 5” Cut 8FL

Needs inserts and screws

Collis 67848 CAT50 Shell Mill Holder 50VF 2.0EM 5.63 Pro 04 USA CNC Tooling

Markings on tool: "Collis 67848 50VF 2.0EM 5.63 PRO 04 USA". Style: CAT50 Shell Mill Holder, 50VF taper. Model: 67848. Heavy-duty precision toolholder for CNC milling machines using CAT50 spindle.

Tecnara Kyushukogu ABH-85 Boring Head CAT50 Godaiki C554-1250 Japan Precision

Tecnara Kyushukogu ABH-85 precision boring head with CAT50 shank and Godaiki C554-1250 adapter. High quality boring/facing head manufactured by Kyushukogu, made in Japan for Tecnara. CAT50 tool holder shank, marked Godaiki C554-1250.

Star-SU 1981-1282 REL Solid Carbide Step Drill 10.5,13.4mm w/ T&D Cat 50 Holder

BROWN & SHARPE No.22H Recessing Swing Tool B&S and Shop made Knee Tool 1" Shank

BROWN & SHARPE 711-220-222 No.22H Recessing Swing Tool 3/4" Shank working. For #2 and 2G brown & Sharpe Machines.

BROWN & SHARPE TURRET LATHE TURNING TOOL HOLDER - 22B

Model #: 22B. This is a used Turret Lathe Turning Tool Holder in GREAT condition. Made in the U.S.A. by Brown & Sharpe. Shank Length: 5".

2 HARDINGE DRILL OR REAMER TOOL HOLDER 00-D 5/8" shank With 1/2 Bore

Pair of hardinge floating drill or reamer holders. 5/8 shank with 1/2 bore. Used in good condition.

BOYAR-SCHULTZ DRILL & REAMER TOOL HOLDER - 00DRH-L

Ref 33-06 tot. Capacity: 1/2".

Brookfield TA-8 Hydraulic Offset Floating V-Jaw Bit Holder 5/8" Shank 1/64-1/2

Brookfield TA-8 Hydraulic Adjustable Offset Floating Drill Bit Holder 5/8" Shank 1/64-1/2" Max. Similar to non-hydraulic Brookfield Part number BA-10. Reversible V clamp for accurate centering of small or larger bits.

BOYAR-SCHULTZ DRILL & REAMER TOOL HOLDER - 00DRH-S

Ref 38-57 tot. Capacity: 1/2".

NTC 6.50 Inch 2.12X2X1.50 Inch OD Threaded 0.78 Inch ID Drill Holder 1641-U USED

5MT Boring Head 4” Cut Milling Head Lucas Bullard

5mt