Screws & Bolts

10 Lbs Assorted Hardware Bolts Steel Nuts Screws Washers Hooks Fasteners

The lot pictured is the one you will receive. They can be for use, arts & crafts, etc.

SpotNails X1S76-8650 16GA 1/2″ MED CR STAPLER 1/2″ – 2″-

Tested works great. In great condition as you can see in the pictures. Categories: 16 Gauge Staplers, Staplers. Trigger Mode: Selectable.

Giant Bolt & Nut - Steampunk Decor

Giant nut / bolt. Measures 10" from end to end. Bolt measures 1 5/8 " across.. Hex head meaures 2 5/8". Nut and Bolt works as should and spins well .

Simpson Strong-Tie SDWC #15 6in Truss Hex Clear Zinc 100 SDWC15600B-KT

Didn't need them all, 300 of 500 left that's why it's cheaper. All screws are in great condition.

10 LBS Mixed Screws Bolts Nuts Washers Hardware Lot Anchors Fasteners Bulk ++

M10 Lifting Eye - 1.47KN/SWL, Lot of Seven (7)

M10 shoulder eye bolt, M10 thread. NOTE: the main picture shows 6 pieces, there are actually 7 pieces for sale. Zinc chromate finish.

M12 Lifting EYE BOLT - Marked 0.22T/SWL, 1999, SI, Lot of Nine (9)

Marked 0.22T/ SWL. With nuts and lock washers.

34) 3/4"-10 x 3" Grade A325 Structural Hex Bolt Galvanized w/ Nuts (Ungraded)

Lightly used or unused. A lot of 34 bolts with nuts. The grade of the nuts is unknown.

*NEW* GOLDEN EAGLE B SERIES FUEL RAIL GFR100 POLISHED

1 - Golden eagle 3/4 Boss Plug. 1 - OEM honda fuel line compatible fitting.

Machine screws, headless plug screws, 6-48

1 set of 4 blued plug screws size 6-48.

*NEW* GOLDEN EAGLE B SERIES FUEL RAIL GFR100 RED

1 - Golden eagle 3/4 Boss Plug. 1 - OEM honda fuel line compatible fitting. Colro: RED.

*NEW* GOLDEN EAGLE B SERIES FUEL RAIL GFR100 GOLD

1 - Golden eagle 3/4 Boss Plug. 1 - OEM honda fuel line compatible fitting. Color: GOLD.

Lot 21 Pomona 1330-2 Double Banana Plugs USED

We do our very best to describe the item listed.

LARGE MACHINIST HARDWARE LOT BOLTS NUTS SPACERS STUDS THREADED RODS SHOP MIX

LARGE MACHINIST HARDWARE LOT BOLTS NUTS SPACERS STUDS THREADED RODS SHOP MIX Large mixed machinist hardware lot including bolts, nuts, washers, spacers, threaded rods, and assorted shop components. Includes a wide variety of sizes and types. Also comes with additional mixed small parts and hand tools as shown. Great for machinists, fabrication work, CNC setups, or general shop use. Condition is used with normal wear. Some pieces may show light rust or oil from storage. Everything shown is included. Sold as one bulk lot.

HEX HEAD CAP SCREW 2"-4-1/2 X 8", GRADE 8, PARTIAL THREAD, THREAD LENGTH 4-1/4"

Approximate weight: 9 lbs. JSW/#442/SKID #334/(26)SH HEX HEAD CAP SCREW. HEAD TYPE: HEX. THREAD LENGTH: 4 1/4". HEAD SIZE: 3". JSW/#442/SKID #334/(26)SH. OVERALL LENGTH: 9 1/2".

18" Single Channel Reversible Bracket Standoff Unistrut Strut Solid Post - 2 QTY

100% Authentic.

Ridgid / Erie USA Pipe Wrench Heavy Duty 14" 10" 8" 6" & Pipe Cutter #10 (Read)

Ridgid / Erie Pipe Wrenches Heavy Duty (All Steel) 14" 10" 8" Erie 6" & Ridgid Pipe Cutter (Aluminum) No. 10 (1/8" to 1") all USA Made. Tested and all Work Well. Sold as is. None of these issues should affect performance of the wrenches.

Complete Vintage BLUE-POINT by Snap-On - REX-10 EXTRACTORS IN ORIGINAL BOX

Great, lightly used condition. Later Blue-Point extractor set were silver, and I think the "B" in this set might be a trade in. Made in USA. Most look unused or lightly used. All look ready to work with no issues.

Vintage Antique Square Head Machine Bolt & Nut Lot 1"-6" Mixed Fastener Hardware

Quantity: 15 Bolts with matching square nuts for many.

Antique/Vintage Rusty Square Nuts Lot

USED and rusty standard square head nuts from 1/4 to 5/8 inch. 115 pieces.NUTS WILL NEED TO BE CHASED TO CLEAN UP THEADS.THESE ARE USED AND SOME MIGHT NOT BE USEABLE,SO I DO THROW IN SOME EXTRAS( not all nuts are used but I list them as used so there's no conflict )

Vintage Dial A Nut Hardware Store Counter Display Screw Bolt Size Gauge

Marked “Dial A Nut” with patent pending notation. Garage display. Displays very well overall. This is a free standing display and does not rotate. 200 + pieces.

Qty 1 - HP m.2 Standoff Screw. Fits t530, t630, t730, t740 thin clients & more

They are black in color: M1.6 x 2.5mm with a T8 Torx head. Fits t520, t620.

Special Listing 10PC OEM V8 3 Valve Intake Manifold Bolts F150 250 Expedition

You may not need all 10 bolts. This is a 10pc set that is setup for the V8-5.4L engines. Confirm the spec for your intake manifold. Do you have a 2004 F150, 5.4L 3 valve?. From many of the Ford F150 Forums, the spec is as follows.

Qty of 100 Hex Head 5/16" x 4" Lag Bolts Zinc Plated Wood Screws

Used once, they are like brand new.

1/4 Bolt USED

Condition is Used.

Torx And Phillip Head Screws From Hard Disc Drives (Bags Of 50)

Have over 500 screws from computer hard disc drives. Sorting them into bags of 50. Will be adding different bags occasionally. Will make up a bag with a variety if requested. Current list of bags available.

Vintage Screw Jacks 3/4” Screw 5-1/2” X 8” Jig Setup Machinist 4” Base

great screw jacks with T handle and jam nuts. 3/4” screw. Height from 5-1/2” to 8” with a 4” base

1/4"-20 Male to Male Camera Thumb Screws Knurled Tripod Mount Adapter Lot

Screws show minimal handling wear from storage.

32-5" Lag Bolts, 32-Lag Shields, 64-1/2" Washers. originally for speed bump inst

32-5" Lag Bolts. 32-Lag Shields. originally for speed bump installs. 64-1/2" Washers. or a set of those available.

18" Single Channel Reversible Bracket Standoff B Line Strut Solid Post - 2 QTY

See all photos.

Conflat 4.5” Plate Nuts For Clearance Flanges, Pack Of 20

Pack of 20, some discolored due to bake out

Lot of 11 Vintage Reed & Prince Machine Screws & Hardware Boxes Mixed Sizes USA

• Reed & Prince collectors. • Screws appear unused but not counted. • Mixed sizes and types (see box labels and photos). • Sold as a lot only. • Made in USA (based on box markings).

3/4-10 x 12" Hex Head Cap Screw Bolts Marine Grade 316 Stainless Steel 3/4x12-14

used 3/4-10 x 12"-14" long cap screws with nut stainless dock bolts SOLD EACH

1990-1997 Nissans D21 Hardbody 240sx KA24E Bolts Screws Part Lot Hardware OEM

Removed from 95 d21. Various bolts and screws and hardware from body and engine.

Original Victor Victrola Pan & Round Head Screws - Various Grades

Authentic Victor Victrola Talking Machine Rolled-Thread Cabinet Screws. Round-Head machines screws: These are used to fasten the motor to the deck and also to fasten the Tone-Arm and Horn. The 1-3/8 Pan-Head screws can also be used this way.

1/2" -13 x 4-1/2" Galvanized Hex Machine Bolts Lot of (10)

We have several of these we have a few nuts for some of them. Just let us know how many you would like? Thanks for looking.

Nylon Hex Standoff Screw and Nut Assortment

Set of Assorted Standoffs for PC/Motherboards

Machine screws, headless plug screws, 8-40

1 set of 4 blued plug screws size 8-40.

ALTERNATOR ADJUSTING BOLT 23519910 FITS DETROIT DIESEL 60 SERIES -USED-

USED ALTERNATOR ADJUSTING BOLT 23519910 FITS DETROIT DIESEL 60 SERIES

2 1/2 stainless steel deck screws

The product is a pack of 2 1/2 stainless steel deck screws. These screws are durable and corrosion-resistant, making them ideal for outdoor use. With a stainless steel material, they can withstand various weather conditions and provide a secure fastening for decks, fences, and other outdoor structures. The 2 1/2 inch length makes them suitable for a range of applications, offering a reliable and long-lasting solution for fastening materials together in outdoor environments. Torex T25 drive. May contain a few screws of other sizes.