Lab Furnaces & Ovens
lab furnaces & ovens — pre-owned
Browse 2,453 lab furnaces & ovens — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
Quincy Lab Model 10GC Lab Oven Scientific Oven
Works great
Boekel Scientifi Hybez Oven
Boekel hybez cell oven. Barely used like new. Cleaning out lab and making room for new equipment. Free shipping in US
Whip Mix Pro 200 Porcelain Oven Used Dental Lab Equipment Dental
Function Tested No vacuum pump
VWR 414005-108 Forced Convection Oven 1.75CuFt, 70°C To 250°C, 120VAC CLEAN!
Unit shows light signs of normal use if any and functions as intended by the manufacturer.
Metrohm Brinkmann 688 KF Oven Furnace
used-110V 200W 40L Electrical Incubator Laboratory Drying Heat Treatment Oven
Capacity: 40L. Power: 200W. Electrothermal Incubator (239936-used). Press the set key to enter the temperature set state. Turn on the power switch, about 3 seconds later into the normal display state.
You save $26.56
Vintage Jelenko Benchtop Jewelry Burnout Oven Power Tested
Model Jelenko. The condition of this item is not tested for functionality as we do not have the capability to test the device fully; The Unit has been inspected, and the results are as follows. Device has scuffs, scratches, and rust from normal use.
SNOL 8.2/1100 Muffle Electric Lab Furnace 8.2 L Ceramic/Stoneware 120V 1.8KW
SNOL 8.2/1100 Muffle Lab Furnace 8.2 L Upward Opening Door 120V 1.8KW.
Ceramic Table for Ney Centurion Q50 Porcelain Oven - Dental Lab KK787
A used ceramic table for a Ney Centurion Q50 porcelain oven. Part #9028. We do certify that we comply with all international laws. Se Habla Espanol!
The Electric Furnace Company Industrial Heating Oven Brass ID Badge
This is the original manufacturer’s brass ID plaque for an industrial furnace–NOT a reproduction. This plaque is in excellent collectible condition. Sold “as-is” -- see photos for more details.
VWR/Sheldon Model 1400E PN: 9100787 0.6-Cubic Foot Vacuum Oven; 115V WARRANTED
Clean, fully working and excellent condition VWR/Sheldon Model 1400E PN: 9100787 0.6-Cubic Foot Benchtop Vacuum Oven. Door gasket is clean and in perfect condition. All valves operate and hold vacuum as intended. This is a late model unit. Operates on 115v with attached power cord. .
12"x12"x20" Cress C122012D/PM4 Duel Chamber Heat Treat/Draw Furnace
It is used for industrial heat treating, assaying, and laboratory testing. Door: Counterbalanced design for safe operation. Spec Sheet 37" x 48" x 65". Max Temperature.
NEY Vulcan A-550 Control, Benchtop Ceramic Casting Lab Furnace, 2000 °F Oven, #3
Benchtop Ceramic Casting Lab Furnace, 9" x 7" x 9". NEY Vulcan. Max Temp: 2000 °F.
Gravity Convection Oven (QCY 10GC)
Gravity Convection Oven (QCY 10GC)
Ivoclar IPS Empress EP 500 Dental Laboratory Burnout Oven Furnace
Ivoclar IPS Empress EP 500 Dental Laboratory Burnout Oven Furnace
NEY Vulcan A-550 Control, Benchtop Ceramic Casting Lab Furnace, 2000 °F Oven, #6
Benchtop Ceramic Casting Lab Furnace, 9" x 7" x 9". NEY Vulcan. Max Temp: 2000 °F.
Whip Mix ProPress 200 Dental Press & Vacuum Firing Furnace
Item Includes: one Whip Mix ProPress 200 Furnace power cord. Model: Pro press 200 furnace. Manufacturer: Whip Mix. Furnace Type: Pressing. I then powered on the unit, attached a vacuum pump, and ran two 45-minute cycles.
You save $240.00
Corning PC-320 Laboratory 5x7" Magnetic Stirrer Hotplate 120V 575W --heats fast!
Up for sale is a Corning PC-320 Laboratory 5" x 7" Magnetic Stirrer Hotplate. Operates at 120VAC 575W. Spins smooth and quiet. Heats fast! Works and looks great! No exceptions. The item has been cleaned and handled as best as possible.
You save $33.95
Thermolyne 1400 Furnace Model F-B1415M - TESTED
ThisThermolyne 1400 Furnace is used but has been tested and is in working condition. We will never intentionally send you a broken item (unless the item is listed ?. For Parts/Not Working?). We may have a solution to your problem.
MRL, Ceramic TC Holder for Diffusion Furnace, Used, Lot of 10
Common on the MRL Sandvik, but will adapt to any application.
You save $250.00
Thermo Scientific F47920Thermolyne Benchtop Muffle Furnaces 220-240 Volt
Ovens turn on and heat up.
Ivoclar Vivadent Programat S1 Dental Restoration Furnace
Model: Programat S1. Manufacturer: Ivoclar Vivadent. Furnace Type: Sintering. Item Includes: S1 1600. Hours of Use: 8907. Vacuum Pump Status: Not included. Year: 2019.
Clean VWR/Sheldon 1300U/PN: 9070834 1-CuFt Gravity Convection Utility Oven; 115v
Clean and fully working and good condition VWR/Sheldon 1300U PN: 9070834 1-Cubic Foot Gravity Convection Utility Oven. with two 12"x12" Stainless Steel Shelves. Operates on 115v with attached power cord.
Jeneric/Pentron Inc. Auto Press Plus Pressing Furnace. Comes with pump and hose
It has primarily been used for Zirconia and e.max glaze cycles.
Ivoclar Vivadent Programat S2 Dental Lab Zirconia Sintering Furnace Oven
Other accessories not shown or listed here. Model: Programat S2. Manufacturer: Ivoclar Vivadent. Furnace Type: Sintering. I then cleaned up the unit, and connected it to 125v power cable. The unit powered on, and was ready for a heat test, which it successfully passed.
NEY Vulcan A-550 Control, Benchtop Ceramic Casting Lab Furnace, 2000 °F Oven, #5
Benchtop Ceramic Casting Lab Furnace, 9" x 7" x 9". NEY Vulcan. Max Temp: 2000 °F.
Milestone START SYNTH Microwave Synthesis Labstation Oven with Control Terminal
Milestone Microwave Laboratory Systems Microwave Synthesis Labstation System. Model: START SYNTH. MW Output Power: 1200W, 2450 MHz. Input Power: 2400W.
Pennwalt JELENKO ACCU-THERM 250 Benchtop Ceramic Casting Lab Furnace Oven 2000°F
Pennwalt JELENKO ACCU-THERM. Benchtop Ceramic Casting Lab Furnace Oven. Model: 250. Max Temp: 2000°F.
Binder ED53-UL Oven 20L Gravity Convection 300C Temp Range (3376641)
Binder ED53-UL Oven 20L 300C Gravity Convection, Stainless Steel, Used. Natural convection. Wide range: 5C to 300C. Temperature range: 5C above ambient to 300C. Power frequency: 115V, 60Hz. Stainless steel construction.
You save $172.50
Whip Mix Pro Press 100 Dental Ceramic Furnace Vacuum Lab Oven (Includes Vaccum!)
Both units are in excellent used condition and have been fully tested. The system powers on, heats up correctly, and works flawlessly without any issues. (1) Whip Mix Pro Press 100 Dental Furnace. Necessary vacuum and power lines to connect the units.
Across International Easy Vac-7 / 1 Stage Vacuum Pump
The Across International EasyVac 7 cfm Vacuum Pump with Filter is a compact and efficient vacuum pump designed for use with vacuum tube furnaces, like the VO Vacuum Oven. With a switchable 110V-220V power source, this pump is versatile and suitable for various applications. Made by Across International in the United States, the EasyVac-7 model includes a mist filter to effectively clean the air before pumping, ensuring a clean and safe environment in lab settings. Ideal for use in research labs, medical settings, and industrial applications, this vacuum pump offers reliable performance and a convenient solution for maintaining clean and controlled environments.
Blue M Pom-146c Convection Oven
Came from a functional die making shop wired for 240 I have not personally tested it though it was in use until I purchased it. Item will be tested in the near future if not sold. Overall good condition. Freight can be arranged at buyers discretion.
Despatch LAC1-38A-6 Benchtop Laboratory Oven 3.7CuFt, 40-260°C, 120VAC 16.5A
Despatch Benchtop Laboratory Oven. Oven Has Custom Shelves See Pictures. Temperature Range: 40-260°C. Full size truck access and forklift is acceptable. Maple Grove, MN 55369. 9472 Hemlock Lane N. SKU# SB-199806.
Ivoclar Vivadent Programat P510 Dental Restoration Furnace
Manufacturer: Ivoclar Vivadent. Item Includes: P510 unit, Power cable, Pump hose, Vacuum pump, Firing tray. Model: P510. Furnace Type: Firing. - other accessories not shown or listed here. Vacuum Pump Status: Included.
You save $750.00
Ivoclar Vivadent Programat CS Dental Ceramic Glazing Furnace w/ Pump
Ivoclar Vivadent Programat CS Dental Restoration Furnace. Model: Programat CS. Manufacturer: Ivoclar Vivadent. Furnace Type: Sintering. Vacuum Pump: Included.
NEY Vulcan A-550 Control, Benchtop Ceramic Casting Lab Furnace, 2000 °F Oven, #1
Benchtop Ceramic Casting Lab Furnace, 9" x 7" x 9". NEY Vulcan. Max Temp: 2000 °F.
Thermo Scientific Isotemp 180L Control Display Module 50121669 / 50145096
Part number 50121669 is printed on the circuit board. Plastic bezel housing marked 50145096. The oven powered on and operated normally prior to disassembly.
Blue M OV-12A Laboratory Drying Oven Incubator 100°F-500°F 120V Tested Working
Manufactured in Blue Island, Illinois, USA. Unit powers on and heats properly. Temperature range is adjustable from 100°F to 500°F (38°C to 260°C). This unit is in good used condition and has been tested.
Blue M Laboratory Oven - Model LO-136-P MPN E1204101
Selling a TPS / Blue M laboratory oven, model LO-136-P. Comes with operation and maintenance manual and test report. Specs from tag/report: Model: LO-136-P Serial: E1204101 Voltage: 230V, 1 phase, 60Hz Power: 2.0 kW FLA: 9.5A Max temp: 260°C Control: Shimaden digital controller / SSR Airflow: Horizontal NEMA 1 enclosure Clean unit overall. Door, gasket, controller, and chamber look good. Includes manual inside. Buyer responsible for pickup/loading.
Whip Mix Apollo II Furnace Oven
Whip Mix IntraTech Apollo II Dental Burnout Furnace Oven - Modified / For Parts. Furthermore, the native physical "Table Up" and "Table Down" keypad buttons on the front of the furnace work perfectly, lowering and raising the platform lift cleanly and smoothly.