Fiber Lasers
fiber lasers — pre-owned
Browse 489 fiber lasers — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
SPI G3-SM Series 20W Infra-Red Laser, 1064nm SP-20P-0801-003
Here is an SPI Laser in overall good condition with little to no damage to the item, except for small cosmetic scratches or scuffs on the housing of the unit. The unit has been powered on and tested.
You save $81.78
MAX Laser Source Pump Source 260W 29V 18A Original Full-Power for Laser Cut Weld
MAX Original Laser Pump Source 1064nm 260W 29V 18A Diode Full-Power for Laser Cutting Welding. With a maximum output power of 260W, this pump source is ideal for driving high-power laser systems, ensuring stable and efficient operation.
100-1000W 915-975nm Laser Diode Pump w/ Coupled Fiber Optic Cable SMA905
100W 115W 210W 350W 375W 400W 500W 900W 1000W 915-975nm Laser Diode Pump Source w/ Fiber Coupled Optic Cable SMA905 Connector. Note: The SMA905 connectors installed can overheat if kept running continuously, and you will need to monitor the heat closely and ensure a duty cycle which does not cause them to overheat.
500W Raycus 915nm Laser Diode Pump w/ Coupled Fiber Optic Cable
500W Raycus 915nm Laser Diode Pump Source w/ Coupled Fiber Optic Cable
Acterna OLS-15 Optical Laser Source Fiber Optic Tester 1310nm/1550nm -7dBm CW
Acterna OLS-15 Fiber Optic Laser Source.
You save $15.84
Lot Of 3 Vintage Metrologic Instruments Neon Laser ML869 Tested Good
Lot Of 3 Vintage Metrologic Instruments Neon Laser ML869 Tested Good. Manual included.
IPG DLM-200-975-AC Air-cooled Diode Laser Module + Fiber Lens with WARRANTY
IPG DLM-200-975-AC Air-cooled Diode Laser Module + Fiber Lens. Follow link below for more specifications.
You save $1000.00
20W 4.3"x4.3" Fiber Laser Marking Machine w Autofocus f/Metal Marking - Used
Compact, Quiet, & Safe: At just 26.8" x 13.4" x 28", this fiber laser fits perfectly in tight spaces and runs quietly, while the included safety goggles provide extra protection. Enjoy focusing on your work without worrying about noise or laser exposure.
Lot Of 2 Vintage Metrologic Instruments Neon Laser ML820 & ML620
Lot Of 2 Vintage Metrologic Instruments Neon Laser ML820 & ML620 Light comes on when plugged in but no laser. Selling both as-is.
OMTech MOPA 60W Autofocus Fiber Laser Marking Machine - Used
Automatic Focusing: With our autofocus feature, you can focus on your work while our fiber laser machine automatically adjusts the focal length for perfect accuracy of ±1 mm. Compact, Quiet, & Safe: Designed to fit in tight spaces at 26.8" x 13.4" x 28", this fiber laser engraver operates quietly, with safety goggles included for protection so you can focus on your work without distractions.
50W Fiber Laser Engraver 5.9"x5.9" Metal Marking Machine - Used
Instead, it provides solid-state efficiency, quality, stability, and durability for its entire service life of 100,000 hours. Compatible with LightBurn software and rotary axes, our desktop laser engraver ensures seamless operation and versatility for all your marking needs.
Fiber Laser Alignment Camera Filter - Used to Center Red Laser in Output Nozzle
Filter only as shown - you will need a suitable usb microscope camera. This filter goes on the tip of the camera to filter light and make the camera able to image the location of the red laser in the nozzle. Can be hot glued, balanced, etc in place. Camera is shown for reference only and is not included in the sale.
Raycus 1000W Fiber Laser Source for Fiber Laser Cutting Machine - Working - AS I
Raycus 1000W laser source for a fiber laser cutting machine. The laser is working properly, but the yellow fiber optic cable needs to be replaced. Power: 1000W.
Lightcomm CPS C7 Pump Combiner 1080nm Open Box Fiber Optic Module
Fiber length: >0.8 m. Fiber laser systems. This is ahigh-power fiber laser component intended for use by trained professionals only. Pump: 915 nm, 25 W. Key Specifications. What’s Included. Beam quality: M² ≈ 1.096.
Andor Technology 400 Series Laser Combiner System LC-501A with Key, Tested
Serial No: LC-0516. We take joy in helping you get the gear you want at the price you need. We work hard to include a lot of pictures of each item.
500W Raycus 915nm Laser Diode Pump IR
500W 915nm Laser Diode Pump Source IR, without coupled fiber.
MAX 130W 260W Laser Pump Source With Driver For Laser Engraver DIY Retrofit Part
Laser Machine. Blue Laser Marking Machine. CO2 Laser Tube. Laser Cleaning Machine. Laser Head Set. Marking Laser Source. CO2 Laser Marking Accessories. CO2 Lens & Mirrors.
OMTech 30W Intergrated Fiber Laser Marker 5.9x5.9in. -Galvo Compact 30 - Used
Prior to launching OMTech in California, we amassed over a decade of experience in the laser engraving industry. OMTech Desktop Laser. OMTech Pronto Series. The best CO2 Desktop Laser Engraver from OMTech.
Acterna OLS-15 Optical Laser Source Fiber Optic Tester 1310nm/1550nm -7dBm CW
Acterna OLS-15 Fiber Optic Laser Source. Tested for power up only. Batteries not included.
You save $13.20
OMTech 30W 6" x 6" Fiber Laser Marking Machine with Autofocus - Used
Laser Power : 30W. 30W Processing Area : 5.9 x 5.9 in. (150 x 150 mm). Pulse Width : 80-120 ns. Marking Accuracy : ±0.0004 in. (±0.01 mm). Laser Wavelength : 1064 nm. Laser Frequency : 30-60 kHz.
Metrologic Instruments Metrologic Neon Laser ML800 - Working Condition
50W™ Intergrated Fiber Laser Marker Engraver 5.9x5.9-Galvo Compact 50 - Used
CO2 Laser Scanning Galvo Head Galvanometer with Beam Expander 10.6um Wave Lenght
CO2 4x Beam Expander.
Secondhand 50W Fiber Laser Engraver 5.9"x5.9" Metal Marking Machine
Instead, it provides solid-state efficiency, quality, stability, and durability for its entire service life of 100,000 hours. Compatible with LightBurn software and rotary axes, our desktop laser engraver ensures seamless operation and versatility for all your marking needs.
Vintage Rare Metrologic Neon Laser ML939 w Modern Tube and Original for Display
There is an audio modulation input but that has NOT been tested and its BNC connector is a bit mangled (but could be repaired or replaced). The output power is between 3 and 4 mW (the spec for the ML-939 is 2 mW "typical").
OMTech MOPA Fiber Laser Cutter 30W JPT Laser Engraver f/Etching Metal More-Used
Instead, it provides solid-state efficiency, quality, stability, and durability for its entire service life of 100,000 hours. Compatible with LightBurn software and rotary axes, our desktop laser engraver ensures seamless operation and versatility for all your marking needs.
Precitec Laser Cutting Cutter Head ZO FS BO/CAM P0574-1282-00001
Are needed. Fall Creek, WI. "This unit has been used. DUE TO THIS, LISTED AS 'FOR PARTS OR NOT WORKING'. Rest Assured Bargains.
(1 Pair) Thorlabs CPA1 CPA2 Alignment Plates Targets Set for 30 mm Cage Systems
The quick-mount wing structure allows these plates to snap securely onto the upper parallel cage rods without requiring the disassembly of existing hardware. ======================================.
3W IPG Photonics RLR Series Raman Fiber Laser RLR-3-1471 nm works, some damage
You save $225.00
Great ThorLabs S1FC635 Fiber Coupled Laser Source 635nm
Model S1FC635. Fiber Coupled. Laser Source. (no power cord). bargains on the web! Used but in Excellent Fully Functioning Condition.
IPG FIBER LASER YLP-1-100-20 Ytterbium Fiber Laser
Ytterbium Fiber Laser. FIBER LASER. We are here to help and will do our best to resolve any issues.
You save $44.95
Micro Laser Systems SRT-F408-20 412nm 20mw
This product is a laser system manufactured by Micro Laser Systems in the United States. The device is designed for laboratory and medical applications, and is likely to be used with fiber lasers.
You save $62.26
1 IPG PhotonicS HP MODULE FROM A "LASER" PL0300
F-theta Scan Lens Field Lens for 1064nm Fiber Laser Marking Machine f=210mm
F-theta Scan Lens Field Lens for 1064nm Fiber Laser Marking Machine f=210mm. 150mmX150mm working size.
You save $21.22
ThorLabs S1FC637 Fiber Coupled Laser Source With 2x Keys
This item is fully tested and in excellent working order. Item will come with a 30 Day Warranty. Cosmetically in good condition showing minor scuffs / scratches / blemishes from previous use. Includes Fiber Coupled Laser Source as pictured. No additional items or accessories are included. Unless pictured, no power adapter / power cable included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. .
Metrologic Instruments Metrologic Neon Laser ML810
If it is not pictured that it is not included.
You save $232.79
WWG/JDSU OLS-15 Optical Laser Source Fiber Optic Tester 1310nm/1550nm -7dBm CW
Tested for power up only.Batteries not included. Condition: Used. Tested for power up only.
You save $13.20
Precitec 1.0 6000W 2.0 15000W Original Second-hand Cutting Head for Laser Machin
2D laser cutting is the most common application. Feature Precitec 1.0 6kW. Precitec 2.0 15kW. Precitec 1.0 6kw. Precitec 2.0 15kw. 3D laser cutting systems have been widely applied in the automotive industry, especially for the use in agile robots.
Andor Technology 100 Series Precision Control Unit ER-PCUB-110, Tested
Serial No: PU-0516. It is also subject to change during peak periods. We take joy in helping you get the gear you want at the price you need. We work hard to include a lot of pictures of each item.
Broadband Light Source with Wave Amplifier EBS Laser MPB Technologies EBS Series
Minimum Wavelength Range 1529-1565 1529-1565 1526-1568 1526-1600 nm.