Solid-State Lasers

Coherent Sapphire 532-200 OPSL 532nm 186mW TESTED

The laser is very healthy. At 186mW the laser is only using 2.28A out of a maximum of 3.2A. Only 68% max diode current. Coherent Sapphire 532 Laser Head. Laser has 1299 hours of use! Tested and in good working condition.

Bruker GaAlAs Diode Laser 930 +/- 30nm CW 10W

JDSU/JDS Uniphase 21075556 FCD488-020 Continuous Wave Laser V2.11 488nm 500mW

Up for sale is a JDSU/JDS Uniphase 21075556 FCD488-020 Continuous Wave Laser V2.11 488nm 500mW. Data Sanitization C4 - Used Good. Local Pickup. Functional Condition.

JDSU Uniphase 21075556 FCD488020 Continuous Wave Laser 488nm 500mW

Up for sale is a JDSU/JDS Uniphase 21075556 FCD488-020 Continuous Wave Laser V2.11 488nm <500mW. The unit has been PULLED FROM A WORKING SYSTEM THAT WAS DECOMISSIONED AND BEING PARTED OUT. This unit is in GOOD CONDITION with minimal wear from use.

Coherent OPSL Controller OPS Blue-CPU BD for sapphire lasers

For parts or repair.

Cambridge technology Galvo Scanner Mirrors Mount for 6215H and 6210H

New Focus Vortex Stablewave 7004 ECDL Laser Head w/cable (FOR PARTS)

The Vortex is a robust, narrow-linewidth, laser source. From the New Focus Vortex 6000 User Manual This is for a low power head and matching cable. Laser outputs less than 1mW.

Lot of Laser Optical Hardware, Corner Cubes, 1" Lens Tubes

These were removed from optical assemblies. Cleaning up stuff in the way! Buy this so I don't have to recycle it!

JDSU SDL 8530 Grating Stabilized 785nm Laser w/ Kaiser Optical HFPH-785 RAMAN

The laser has been tested and produces about 250mW at 785nm. Output is fiber coupled into a SMA receptacle. Output power is fully adjustable. FIber collimator can be removed for increased power output.

C202923 Coherent Verdi-V18 18W Green Laser w/ Power Supply + Thermotek Chiller

The chiller powers up, and chills and recirculates fine. Hoses/fittings to connect chiller and laser head are NOT included. The triangle-shaped power light at the front of the laser head does not illuminate, even though it does emit a laser beam, as shown (beam at lowest setting in photo).

C202793 Coherent Verdi-V18 18W Green Laser w/ Power Supply + Thermotek Chiller

The chiller powers up, and chills and recirculates fine. Hoses/fittings to connect chiller and laser head are NOT included. The laser head is showing 30276.45 hours (see photos). C202791 Vincent Associates UniBlitz VMM-D1 Laser Shutter Driver w/ LS6Z2 Shutter.

Coherent Sapphire 532-200 OPSL 532nm 200mW TESTED

The laser is very healthy. At 200mW the laser is only using 2.0A out of a maximum of 3.2A. Only 62.5% max diode current. Coherent Sapphire 532 Laser Head. Laser has 1065 hours of use! Tested and in good working condition.

Coherent Sapphire 532-200 OPSL 532nm 195mW TESTED

The laser is very healthy. At 195mW the laser is only using 1.75A out of a maximum of 3.2A. Only 49% max diode current. Coherent Sapphire 532 Laser Head. Laser has 458 hours of use! Tested and in good working condition.

Crystal Technology AOTF 160T1-8LLC-24-0.8 & PCAOM VIS Head , Leica AODS 20160-8R

Crystal Technology AOTF 160T1-8LLC-24-0.8 & PCAOM VIS Head , Leica AODS 20160-8R. Condition is Used. Shipped with USPS Ground Advantage.

ESI Polaris 300 DPSS Nd:YAG Laser For Parts

See photos for what’s present. Appears to be missing the cooling fan and housing only. Ships within 1 business day from the Pacific Northwest. Offers and inquiries welcome!

Paired CRYSTAL TECHNOLOGY AODS 20160-8R Leica Laser Modulator + PCAOM VIS Head

6 full sets of (AODS + PCAOM VIS) available.

Spectra Physics 409-08 Autocorrelator for Femtosecond Picosecond Laser Unit USA

C202912 Coherent Verdi 6W Green Laser Head w/ Power Supply + Cooling Chill Block

The output power was adjustable on the display, but I only tested it at the max setting of 6W (5.99W, as shown). The laser head is showing 17390.65 hours (see photos). Is there a Dock or Forklift available?.

New Focus Vortex Stablewave 6005 ECDL Laser System 633 nm 6 mW TESTED

The Vortex is a robust, narrow-linewidth, laser source. Laser has been tested and produces approx 6 mW at 58 mA in constant current mode after warmup. From the New Focus Vortex 6000 User Manual Laser can be run in constant current or constant power mode.

New Focus Vortex Stablewave 6005 ECDL Laser System 633 nm 4 mW TESTED

The Vortex is a robust, narrow-linewidth, laser source. Laser has been tested and produces approx 4 mW at 56 mA in constant current mode after warmup. From the New Focus Vortex 6000 User Manual Laser can be run in constant current or constant power mode.

Northrup Grummon NPL-002QTGP 532nm 75uJ 8ns Pulsed Laser

532nm 75uJ <8ns Pulsed Laser 28 Hz PRF. Ask if interested.

ICyt Air Blower for cooling down lasers and cameras w/hose, working

Tested and found to be in good working condition.

Cobalt Fandango 0515-04-01-0050 50mW Single Frequency Laser Tested

Tested and working

Cambridge Moblazer ML-GFX Scanning Galvonometer w/ Drivers Laser Light Show

Scan head uses 3x Cambridge 6200 Galvos. Was parts of laser light show system that is no longer needed.

C202779 Thorlabs Vibration Isolation Table w/ 36" x 48" Laser Optical Breadboard

This Thorlabs Vibration Isolation Table (Optical Table Isolator) features a 48" x 36" x 2"H Laser Optical Breadboard, as shown. R202854 Thorlabs Nexus Vibration Isolation Table 48x36 Optical Breadboard 1/4-20.

Coherent Compass 215M Laser Controller

Prefer to pick it up yourself?. Branford Group Industrial Surplus is a premier industrial surplus warehouse. Will you need a Lift Gate?. We will need to know the following Do you have a Forklift?. LOCAL PICK-UP.

Spectra Physics 3960-D Tsunami Laser Oscillator w/ 3900 Controller + Spare Optic

Unit also includes a box of spare Spectra Physics optics. This was removed from a closed physics lab. Unable to test due to no pump laser.

Coherent Sapphire 561-150 OPSL 561nm 150mW Single Frequency SLM TESTED 169mW

The laser is very healthy. At 169mW the laser is only using 2.0A out of a maximum of 2.9A. Only 69% max diode current. Coherent Sapphire 532 Laser Head. Laser has been tested and in excellent working condition.

General Scanning XY10A-000-YD X-Y laser scanner Galvanometers 532nm DPSS optics

Optics designed to work with 532nm.

NEW LOWER PRICE !!! - Omicron LDM405.40.350 Laser Power Supply FREE SHIPPING

Tested and all +/- 12 V +/- 5 V supplies working as normal.

LASER QUANTUM VAREO 660nm NOVANTA PHOTONICS LASER CONTROLLER

For parts only! We cannot test further.

(LOT OF 2) Melles Griot 3222H-C-66 Laser *SOLD AS-IS*

SOLD AS-IS. Note: The product is in fair condition with scratches and scuffs from previous use. What you see in the photos is what you will receive!

General Scanning 3x VM2500+ 2x Dual Channel Galvo Driver Cards

Also included are the matching galvo driver boards. Each board is dual channel. Galvo drivers are mounted on a large fan cooled heatsink.

Coherent Sapphire 532-200 OPSL 532nm 200mW Very Low Hours TESTED

Coherent Sapphire 532 Laser Head. The laser is very healthy. At 200 mW the laser is only using 1.85A out of a maximum of 3.2A. Only 58% max diode current. Laser has only 3.2 hours of use! Tested and in good working condition.

Melles Griot Dual Stablerod Adjustable Mounting Platform 07DPP013/513

A quick release spring loaded split nut allows the user to disengage the leadscrew to allow quick manual positioning of the optical platform. Heavy duty platforms are ideal for mounting large heavy optical components and assemblies that need an adjustable height.

Melles Griot L44000 Universal laser Controller

HeL44000 acts as a compact, versatile interface between power electronics and laser heads.

Spectra Physics 3941-35-M1S Spectra Physics Laser Empower and Tsunami 394135M1S

This was removed from a closed physics lab. Unable to test

Rapp OptoElectronic DPSL-355/30 355nm 30mW UV Laser

Used but clean, tested and in good working condition as shown in the pictures. Key is included. Interlock cable is included. --- Item#325182L8D ---

MELLES GRIOT 85-RCA-400 660NM (RED) 400MW LASER HEAD + L44000-427-01 CONTROLLER

ALSO INCLUDES THE CABLING PICTURED. WE MAY HAVE MULTIPLE UNITS AVAILABLE, SEE ABOVE. THE ONE YOU WILL GET IS SIMILAR IN CONDITION. ONLY THE ITEM PICTURED IS INCLUDED. IF IT IS NOT PICTURED, IT IS NOT INCLUDED.

Solta Isolaz Pro 40-01740 Acne Treatment Laser System w/ Handpiece

Unit powers on and reaches the keypad screen as shown. Includes base unit and attached handpiece. Sold as pictured.