Rail & Shaft Supports

LOT of 2 SP-12 Stainless Steel Support Rods Extension Bars Pair Threaded Stud

Dual-End Design: Engineered with a threaded male stud on one end and a hollow female opening on the other. Up for sale is aLOT of 2 SP-12 Stainless Steel Support Rods. Because they are still sealed in their protective sleeves, they are entirely free of scratches, surface rust, or wear.

(6PCS) Thomson SB10 Linear Guide Shaft Block Support .625" BORE (USED)

(6PCS) Thomson SB10 Linear Guide Shaft Block Support .625" BORE (USED)

Front Left or Right CV Axle for 2012-2022 Ram 1500 2019-2020 Ram 1500 OEM

GREAT USED PART.

LOT OF 4 MISUMI Lead Screw Clamp Plates Stop Plate , SQUARE

J297 T3 CABINET.

Allen-Bradley 2094-PRS3 Ser A 3 Axis Slim Drive Power Rail (Buss: 325/650VDC)

(2) THK HSR20 Bearing Block w/ (1) 10-11/16" Long Linear Rail

Used two HRS20 Bearings and one 10-11/16" overall length rail. The rail is about 10-11/16" overall length.

Thomson Linear Bearing Shaft Rail 37" x 1.5"

Thomson Linear Bearing Shaft loc: #28 N4. No warranty beyond that. I have made an honest and fair evaluation of this item, but I am only human. I do miss things occasionally, and if it is not as I have represented it, I certainly will do what I can to "make it right".

(2) THK HRW27 Bearing Block w/ (1) 21-3/4" Linear Rail

Two used HRW27 Bearings and one 21-3/4" overall length rail. I noticed that if you remove the rail, when you replace it the bearings can catch the end of the rail and kick a bearing out of the race. You can put carefully push them back into the race at the end where it was pushed out. or you can take the entire end off.

CPC MR9M Linear Rail 364mm Length 9mm Width 5.5mm H 2 carriage blocks USED

Up for sale: CPC Linear Rail model MR9M. There are 2 Carriage blocks on the rail. Length: 364mm. Height Rail and Carriage together is: 10mm. Carriage MR9MN. Width: 9mm. These rails are used but slide very nice.

Rexroth R165121320 687mm Long Linear Rail W/Bearing Block

SKU: 207015 - Rexroth R165121320 687mm Long Linear Rail W/Bearing Block - Rexroth - Used . -- Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. If your purchase requires a pallet, banding or any other form of packaging, a packaging fee may apply.

BEI 924-01002-3220 H25D-SS-1000-ABZC-8830-LED-SM18 Rotary Encoder 5VDC 10-Pin

SKU: 297532 - BEI 924-01002-3220 H25D-SS-1000-ABZC-8830-LED-SM18 Rotary Encoder 5VDC 10-Pin - BEI - Used 924-01002-3220 . -- Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. If your purchase requires a pallet, banding or any other form of packaging, a packaging fee may apply.

Dynapar H22006011002X57 Rotary Shaft Encoder 5-26V 1/4" Shaft Flange Mount 4 Pin

SKU: 297447 - Dynapar H22006011002X57 Rotary Shaft Encoder 5-26V 1/4" Shaft Flange Mount 4 Pin - Dynapar - Used . -- Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. If your purchase requires a pallet, banding or any other form of packaging, a packaging fee may apply.

Rexroth R165121320 687mm Long Linear Rail W/(2) Bearing Blocks

SKU: 207014 - Rexroth R165121320 687mm Long Linear Rail W/(2) Bearing Blocks - Rexroth - Used . -- Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. If your purchase requires a pallet, banding or any other form of packaging, a packaging fee may apply.

Schneeberger Linear Rail with Roller Bearing Encoder Miniscale XL 15mm x 950mm

SCALE: STARTING POSITION S1 - 15MM / END POSITION S2 - 800MM. (1) MNNXLS15-G1 EXTRA LONG CARRIAGE WITH SCAN HEAD. (1) MNNXL15-G1 EXTRA LONG CARRIAGE.

Front Left or Right CV Axle for 2012-2022 Ram 1500 2019-2020 Ram 1500 OEM

GREAT USED PART.

FIFE PIVOT GUIDE OPG-LRA

GUIDE LINEAR RACE OFFSET PIVOT GUIDE. GUIDE SPAN: 16-1/4". ROLL FACE: 13". ROLL CENTERS: 14-1/4".

LEE SB10 Linear Guide Shaft Block Support SB Aluminum .625" Shaft

LEE SB-10 This is NOT iron but rather aluminum. Shaft diameter .625” Height 1.75” Width 2.5” Depth .688” Mounting hole diameter .219” Excellent used condition.

(2) THK HSR25 Bearing Block w/ (1) 340mm Long Linear Rail

The pointer is parallel ith the rail and about 4-1/2" from the center of the rail. The pointer holder also acts as a rail stop on that end. The rail is about 13-3/8" from the stop the where the top of the rail is machined, and from stop to stop it's 14", (it's 15-3/4 OAL.).

Allen-Bradley 2094-PRS3 SER A Drive Power Rail USED

W M BERG ANODIZED ALUMINUM LINEAR SHAFT / DEVICE HANGER 26 MM BORE PILLOW D-88

THESE ARE ALSO USED TO MOUNT LINEAR SHAFTS OR SHAFTING. 26 MM BORE AND (4) M 4 X. 7 TAPPED HOLES ON THE FACE OF THE BLOCK.

Thomson Case Hard Rod Linear Shaft RL Guide Round Bearing 1" 61" (101470)

Thomson round linear steel shaft. Misc Shelf Behind.

2 NB SMSK12GUUSK Motion Linear Bushing Slides w/ 80mm Threaded Shaft

2 NB SMSK12GUUSK Motion Linear Bushing Slides w/ 80mm Threaded Shaft.

Schneeberger MN7-G3-V0 Linear Rail 90mm L, 7mm W, 4.5mm H, 1 carriage block USED

Up for sale: Schneeberger Linear Rail model MN7-G3-V0. There is 1 Carriage block on the rail. Length: 90mm. Height Rail and Carriage together is: 8mm. Carriage MNN 7-G1. Width: 7mm. These rails are used but slide very nice.

THK RSR9ZM Linear Rail 75mm Length 9mm Width 5.5mm Height 1 carriage block USED

Up for sale: THK Linear Rail model RSR9ZM. There is 1 Carriage block on the rail. Height Rail and Carriage together is: 10mm. Carriage Length: 30.25mmWidth: 20mmHeight: 8mm.

LOVEJOY L-090.625 / L090625 (USED)

LOVEJOY L-090.625 / L090625 (USED) DISCONTINUED BY MANUFACTURER, JAW COUPLING. 625. Radwell is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers.

CPC MR9M Linear Rail 364mm Length 9mm Width 5.5mm H 2 carriage blocks NEW Qty.2

Up for sale: NEW Qty.2 CPC Linear Rail model MR9M. There are 2 Carriage blocks on the rail. Length: 364mm. Height Rail and Carriage together is: 10mm. Carriage MR9MN. Width: 9mm. These rails are used but slide very nice.

Schneeberger MN9-G3-V0 Linear Rail 95mm L, 9mm W, 5.5mm H 2 carriage blocks USED

Up for sale: Schneeberger Linear Rail model MN9-G3-V0. There are 2 Carriage blocks on the rail. Length: 95mm. Height Rail and Carriage together is: 10mm. Carriage MNN9-G1. Width: 9mm. These rails are used but slide very nice.

Thomson Case Hard Rod Linear Shaft RL Guide Round Bearing 3/4" 72" (101471)

Thomson round linear steel shaft. Misc Shelf Behind.

NSK Linear Rail with Roller Bearings PU150 15mm x 950mm PU150950ALS2PCT

These rails have been mounted to a R&D assembly, never used, and then removed. The REF number is written on the label. (2) PU15 CARRIAGES.

REGAL REXNORD N4 TIGHTENER SHAFT / N4TIGHTENERSHAFT (USED)

Part Number N4 TIGHTENER SHAFT. Radwell is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers.

ASEA BROWN BOVERI OXP10X148 / OXP10X148 (USED)

ASEA BROWN BOVERI OXP10X148 / OXP10X148 (USED) (PRICE/EA) SHAFT, TS3 CIRCUIT BREAKER, 148MM; FOR USE WITH:MOLDED CASE CIRCUIT BREAKER (MCCB); ACCESSORY TYPE:SHAFT; PRODUCT RANGE:TMAX TS3 SERIES ROHS COMPLIANT: NA, OXP10X148.

THK BTK2510BZZ / BTK2510BZZ (USED)

THK BTK2510BZZ / BTK2510BZZ (USED) BEARING, ROLLED BALL SCREW BEARING NUT. Part Number BTK2510BZZ. Radwell is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers.

THK RSR9ZM Linear Rail 250mm Length 9mm Width 5.5mm H 1 carriage block USED

Up for sale: THK Linear Rail model RSR9ZM. There is 1 Carriage block on the rail. Height Rail and Carriage together is: 10mm. Carriage Length: 30.25mmWidth: 20mmHeight: 8mm.

TWO NSK 09-1 LINEAR BEARING SLIDE RAIL STAGE MOUNTING BLOCK ASSEMBLY 1 3/4" LONG

This Sale Is For Two Laboratory Surplus NSK 09-1 Linear Bearing Slide Rail Mounting Block Assembly That Is 1 3/4" In Total Length.

ABB MCB-10 Red Mushroom Head Push Button Switch 1NO From Cart Caddy 5W

SKU: 282588 - ABB MCB-10 Red Mushroom Head Push Button Switch 1NO From Cart Caddy 5W - ABB - Used . -- Prefer to pick it up yourself? You are welcome to do so, by appointment. We will load it free of charge unless otherwise stated in the listing. If your purchase requires a pallet, banding or any other form of packaging, a packaging fee may apply.

STAR 0442-894-01 Linear Rail 395mm L, 9mm W, 5.5mm H 2 carriage blocks USED

Length: 395mm. Up for sale: Star Linear Rail model 0442-894-01. There are 2 Carriage blocks on the rail. Height Rail and Carriage together is: 10mm. Width: 9mm. These rails are used but slide very nice.

Hardened Linear Rod/Shaft, 25mm Diameter, 1.5m Long, M10 x 1.5 Female End Thread

Female End Thread: M10 x 1.5 End. Hardened Linear Rod/Shaft. Linear Rod/Shaft. your account number during checkout. If you do not have an account No Worries! Office Hours The Original Manufacturer's warranty does not apply.

SKF 99133 / 99133 (USED)

Part Number 99133. Radwell is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers.

SPX J140202 / J140202 (USED)

SPX J140202 / J140202 (USED) SHAFT BEARING, ECCENTRIC, 4" BORE, 4" LENGTH, 0.2" WIDTH. Part Number J140202. Radwell is not an authorized surplus dealer or affiliate for the Manufacturer of this product.

INVENSYS AM-676 / AM676 (USED)

Radwell is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers.