Stationary Engines

Fairbanks Morse 1½, 3 and 6 HP Z Instructions No. 2548C Original Hit N Miss

This manual is in good condition for its age. This is a second edition no writing on book or missing pages. Comes with a letterhead envelope as seen in pics. i didn't show all the envelope because it has a name on it. The stamp area has been cut out on the envelope. Look at pics for description.

Vintage Briggs & Stratton Kickstart Engine WMB For Parts Restoration Original

This is an engine I bought in a group with the hopes of restoring. Turns out I have too many projects. This has a lot of good parts and is a great start to a restoration project. The engine is currently stuck (does not turn over).

Antique Lunkenheimer No. 6 Figure 1300 SENTINEL Hit And Miss Engine Oiler

This bronze and brass oiler is designed specifically for hit and miss engines, featuring the iconic Sentinel model. No cracks.

Antique RARE CAST IRON "ARTIC NO.4" LUNKENHEIMER OILER LUBRICATOR Maritime

This is the only cast iron oiler that I have seen. It has not been tested. The sight glass is not cracked. I see no cracks or repairs in the iron.

C. Cretors & Co. Vertical Stationary Metal Engine Model 6478

C. Cretors & Co. Vertical Stationary Metal Engine Model 6478

Vintage Oiler / Grease Cup Lot (10)

72 Fuel Jet Maytag

Orig fuel jet for the 72.

(11) Pc. Lot of Hit & Miss Engine Oil Lubricators / Lonergan Essex Brass Co. Pen

Penberthy / MTT. A unique lot of hit & miss engine oil lubricators. OTHER DETAILS MTT = M ountain T op T ools.

Briggs & Stratton XR 1150 Professional Series Horizontal OHV Engine Motor

Great running engine. Comes with original carb and replacement oem carburetor. This was on a friend of mines sawmill and we decided to put a larger 18hp engine on it. Motor is it Great condition and very well cared for. I don't know the hours on it but probably not much. 250cc 1" x 2 7/8" Shaft. Will be shipped dry no oil. Free shipping to the lower forty eight states.

72 Air Tube

Air tube, fit in block, held by set screw, no sealer needed.

VINTAGE WING NUTS--OLDER STYLES --FOR RESTORATION OF OLD ENGINES-TRACTORS-FARM

LARGE LOT OF VINTAGE UNUSUAL STYLES OF OLD WING NUTS-- APPROX 4 1/2 POUNDS---GATHERED FROM OLD AUCTIONS OVER THE YEARS---GREAT FOR RESTORATION OF OLD FARM AND INDUSTRIAL EQUIPMENT---SHIPPED TO 48 CONNECTED STATES ONLY NO INTERNATIONAL SHIPPING NO REFUNDS NO RETURNS

Maytag 72 Kick Pedal pivot pin flywheel Gas Engine Motor Model Hit Miss Twin

This is the pin that goes in the side cover, pedal, gear and gas tank cover plate. Good original parts! Warrantee: I don't warrantee any of my parts per say. Warrantee's run out and expire! What works on one might not work on another.

Maytag Gas Engine Motor Model 92 Rebuilt Magneto Backing Plate Hit and Miss

Maytag Kick Start Stationary Gas Engine with Flywheel and Crank twin cylinder

twin cylinder ma tag 72 D washing machine enginge it dose run pretty damn good for its age.

Stover Hit & Miss Engine Original

Stover Hit & Miss Engine Rough shape, small crack in head and locked up for parts or repair.

Cylinder Head Valves Military Gas Engine Teledyne 6HP 4A032-4 Steam punk IP

From a military 4A032 - 4 Engine.

Lunkenheimer CROWN No. 0 SWING TOP Oiler Lubricator Hit Miss Engine Brass Steam

Here’s an old Lunkenheimer Crown No 0 oiler. The glass measures about 1-1/4 in diameter and has he over all height is about 4-1/4”. The thread is 1/8 NPT. This is old and could use a good cleaning. It is being sold in as is condition. Please view pictures for the best description. Feel free with any questions. Thanks for looking!!

Vertical 1/2HP Upright Maytag Flywheel, Crankshaft, Main Bearing, Commentator

1/2" CHAMPION TOLEDO PRIMER VALVE SPARK PLUG for an OLD HIT & MISS GAS ENGINE

It seems to be in very nice shape. Check out the pictures and see if you need it. I am a real person who is easy to find. 1/2" Pipe Mounting.

Antique Vertical 1/2HP Upright Maytag Base - Fuel Tank Cast Iron Hit Miss Engine

On the base, there is a faint manufacturer's stamp of S181. So there is rust, corrosion, scrapes, scratches, pitting, paint loss, etc. One corner on the bottom appears to have an casting irregularity / inclusion.

Maytag engine 92

The vintage Maytag engine 72 is a classic piece of equipment that is known for its durability and reliability. With its sturdy construction and long-lasting performance, this engine is a sought-after choice for those looking to power a variety of light equipment and tools. The Maytag brand is well-known for its quality products, making this engine a reliable option for stationary engine needs. Starts right up

Rebuilt Wico XH2049B Magneto Gravely Model L Garden Tractor

This sale is for a rebuilt Wico model XH2049B magneto which will fit Gravely model L tractors. It has had new rear bushing and front bearing as well as points, condenser, screws and cap gasket. Coil is like new and has been tested for continuity and power.

Oberdorfer 350 Brass Belt Drive Rotary Gear Pump Head Vtg. Hit & Miss Turns Over

The Oberdorfer 350 Pedestal Belt Drive Gear Pump head is a high-quality gear pump designed for Hit & Miss engines. Made of durable brass material, this pump is manufactured in the United States by the reputable brand Oberdorfer. It is designed to efficiently pump water or oil etc., making it an essential component for various applications that require reliable machinery. Please view photos as important part of description! One family owned, shop kept item. Thank you for your interest!

REBUILT IHC F4-107000 MAGNETO Farmall McCormick International Tractor HOT SPARK

Here is an IHC F4 4 Cylinder magneto. It seems to be in great shape and it makes an excellent hot spark. I am pretty sure it has been rebuilt but I do not know who did the work. If you want to talk about it 419 789 1159.

Rice & Sargent Engine Brass Plate Plaque Patents 1897 Providence RI Steam Engine

The Rice & Sargent Engine Brass Plate Plaque from 1897 in Providence, RI is a historical marker that commemates the company's steam engine. This plaque serves as a testament to the brand's craftsmanship and innovation during that time period, showcasing the United States origin of the company and its contributions to the industrial sector. It is a valuable plaque that reflects the legacy of Rice and Sargent as pioneers in the field of stationary engines and Heavy equipment.

4 × VTG ANTIQUE CAST IRON FLAT BELT PULLEYS/Wheels HIT MISS ENGINE 7 7/8”

One has been repaired and has a crack in another spoke, one has been repaired, one has a flat spot on small radius of wheel. Good set for smaller gas engine axle hole 3/4”

REBUILT IHC F4-387695 MAGNETO Farmall McCormick International Tractor HOT SPARK

Here is an IHC F4 4 Cylinder magneto. It seems to be in great shape and it makes an excellent hot spark. I am pretty sure it has been rebuilt but I do not know who did the work. If you want to talk about it 419 789 1159.

REBUILT IHC F4-376394 MAGNETO Farmall McCormick International Tractor HOT SPARK

Here is an IHC F4 4 Cylinder magneto. It seems to be in great shape and it makes an excellent hot spark. I am pretty sure it has been rebuilt but I do not know who did the work. If you want to talk about it 419 789 1159.

steam punk 1900's compressor

Steam Punk style compressor. It was removed from a early 1900's railcar caboose. It has a hammer riveted brass tank. One gauge has a date on it of July 28 1896. the compressor turns freely and still pumps air. An additional charge of $250 for shipping will include a wooden box for shipping to mainland of United States.

Robert Bosch FU4BR CW Magneto Hart Parr Case Tractor Bentley Car Engine

This is for an original Robert Bosch FU4BR 4-cylinder magneto for an old car, truck, tractor, motorcycle or other four cylinder engine. These were used on some Hart Parr and Case tractors, Bentley cars, and probably some others. It is in excellent used condition with no cracks, breaks, or repairs that can be seen. It is clockwise rotation as noted by an arrow on the housing. It mounts on a 2 inch square hole pattern and the mounting threads are all in great shape. It has no noticeable bearing wear and turns over very nicely with good magnetic pull. The impulse works as it should and it puts out a hot, snapping spark that is sure to run your engine if it is set up properly. Everything in the points housing looks to be in great shape.

763 773 7753 BOBCAT ENGINE Kubota V2203 51 HP Diesel Engine - USED

Kubota V2203 DI or IDI 51 HP Engine - USED. Kubota V2203 DI or IDI (Direct Injection or Indirect Injection). Right now we have (3)+/- Kubota V2203 Engines. We need the old engine complete in order for our engine to work in the place of the V2203.

Maytag Model 72 Twin Hit & Miss Engine Project 1938 Complete Parts Barn Fresh

This is an engine I bought in a group with the hopes of restoring. Turns out I have too many projects. This looks to be mostly complete and a great start to a restoration project. These are great engines, I have a few in my personal collection.

Used Antique Vertical 1/2HP Upright Maytag Cast Iron Cylinder Hit Miss Engine

So there is rust, corrosion, scrapes, scratches, pitting, paint loss. AND THE END OF THE VERY TOP FIN IS BROKEN OFF, etc, but I didn't see any repairs. However, plenty of life left as a used part.

SPLITDORF S2 INDIAN Motorcycle Magneto Leroi Power Unit Hit Miss Engine CW HOT!!

This is an original Splitdorf S2 two-cylinder magneto as found from an old collector's estate. It is in good condition with no cracks, breaks, or repairs that I can see or know of except for a slight chip/notch in the housing as can be seen in the pictures.

Antique Brass BB Special Penberthy Steam Engine Injector Parts 3/4” Hit Miss

Neat old brass steam Injector for sale. Incomplete, what you see is what I have. Has a fair share of hammer dings/marks that you can see in the pictures. For total restoration or parts. See pictures for the absolute best description. Thanks for looking.

Maytag gas engine motor Model 92 31 11 Governor Arm Flywheel hit & miss

It has been cleaned and bead blasted (NOT SANDBLASTED) and checked for wear. This governor has a good used roller and a new spring. The pin has also been set to factory spec to make your engine run great!

Kill Switch Tab/Spring Mount

Early 92 holds the kill switch to carb. Also used to mount the pedal spring to skids for the short deep gas tank.

Maytag Script Champion Spark Plug Hit Miss Gas Engine 1/2" Beautiful Cond

Vintage Cast Iron Flat Belt Pulley Wheel Hit Miss Engine Tractor 10" x 2-1/2"

HOT HOT HOT EISEMANN G4 MAGNETO 4 CYLINDER CAT MACK FORD MANY APPLICATIONS

Up for sale is: ORIGINAL EISEMANN G4 MAGNETO. THE MAG IS HOT AND WILL THROW A NICE BLUE SPARK. IT SHOWS LITTLE TO NO WEAR. THE MOUNTING PATTERN IS 2"X2". THE MAG DRIVE OR COUPLING HAS THREADED HOLES THAT ARE 2 1/8" APART.