Walk-Behind Compactors

JEENDA 4.5 Centrifugal Clutch Dual Pulley 3/4 Shaft Honda GX160 GX200 5/8 Belt⁠

JEENDA Clutch 4.5" Double Pulley 5/8" V-Belt 3/4" Shaft Size Compatible with Honda GX160 GX200 Engine Plate Compactor Clutch. This is built strictly for a standard 3/4" shaft and will NOT fit a 20mm shaft setup.

Mikasa MVC-88VTHW Plate Tamper Multiquip Honda GX-160 engine + extra parts engin

Mikasa MVC-88VTHW Multiquip plate tamper - rebuilt engine with Honda oem Parts at 52 hours. Only put a couple hours of use on top of that. Included is an extra Honda GX-160 engine that runs, could use for parts. Hour meter needs new battery, drip tube missing below tank, needs new air filter. Video of it operating can be provided by request. “LOCAL PICK UP ONLY” located in Montgomery, Texas.

Wacker Neuson Bing 33 Carburator 33/14/113

Wacker Neuson Bing 33 vintage carburetor For compactors/tampers etc Part number 33/14/113 Used condition, please see photos for exact appearance and condition FREE shipping in the USA 🇺🇸 B4HS

Wacker Neuson Bing 33 Carburators - 33/14/113 - LOT of 2 - FREE SHIPPING

Wacker Neuson. Model Year. BS45Y, BS52Y, BS60Y, BS62Y, BS65Y, BS105Y.

11" Wood Shoe Kit For Multiquip-Mikasa MTX70 MTX80 Jumping Jack Rammer 366910020

MTX70 MTX80 MTX90. For Multiquip Mikasa. Fit For the Following Models. MTX70HD MT65 MT74 MT75. OEM Part Number.

Wacker Neuson Transmitter Remote

OEM Wacker Neuson 5100071155 Transmitter Module For RT82-SC2 EU, RT82-SC2, RTL82-SC3, RT56-SC2, RTKx-SC3, RTK82-SC3, RTLx-SC3, RTx-SC2, RTx-SC2 EU, RTSC3, RT56-SC2 EU Trench Roller.

Wacker Neuson WKR-BS70-2i Engine WM 80-oi for Trench Rammers OEM Part 0182676

The Wacker Neuson WKR-BS70-2i Engine WM 80-oi 0182676 is an OEM part designed specifically for trench rammers and tampers. This high-quality engine is compatible with various Wacker Neuson models such as BS45, BS52, BS50-2, BS60Y, DS70, DS720, and BS50-4. Made by a trusted brand known for reliable light equipment and tools, this engine ensures optimal performance and durability for your business or industrial needs. Perfect for maintaining and repairing trench rammers, this OEM part is a valuable asset for any construction project. WM80

Wacker Neuson Jumping Jack BS68-4 Ab/28 Vibratory Rammer New Generation Low Hour

The BS68-4Ab/28 isbalanced, easy to maneuver, and features low hand-arm vibration for operator comfort over extended use. Whether you're in construction.

Wacker Neuson WKR-BS70-2i Fuel Tank Bushing for Trench Rammers OEM Part 0053577

The Wacker Neuson WKR-BS70-2i Fuel Tank Bushing is a genuine OEM part designed specifically for trench rammers and tampers. Made by the trusted brand Wacker Neuson, this fuel tank bushing is compatible with various models including BS45, BS52, BS50-2, BS60Y, DS70, DS720, BS50-4, and more. Designed for easy installation and reliable performance, this bushing ensures a secure fit and long-lasting functionality for your light equipment and tools.

Used Milwaukee Mx Fuel 20 In Plate Compactor Kit 2 Batteries Charger Freight

used milwaukee compactor comes as seen in pictures batteries hold proper charge compactor works properly will ship via freight to lower 48 states for 296.00 must be a business address with unloading capabilities

Multiquip, Mikasa, Link Guard, Left Side pt# 368119470 For MTX60HD Rammers

Multiquip, Mikasa,right exhast side gaurd For MTX60HD Rammers

BOMAG BP 18/45-2 Rammer Tamper Vibratory Plate Compactor 5.5HP *READ, SMOKES*

Compactor starts and runs, but if left to idle at a lower RPM it starts to smoke heavily within a few seconds. Otherwise does appear to run well when used at a working RPM. Compactor has several marks/scratches, is dirty from use.

Wacker Neuson BPU 3050A Plate Compactor 4-Cycle Engine, Model Year 2009

GX160 5.5 HP engine Wacker Neuson J50A vibratory plate compactor with a reliable Honda GX160 5.5 HP engine. Starts, runs, and compacts as it should. This is a commercial-grade machine that's great for compacting gravel, soil, base rock, pavers, and asphalt. Includes the factory water tank for asphalt work. Normal cosmetic wear from use, but it's mechanically solid and ready to work. Wacker Neuson compactors are known for their durability and are much better built than many cheaper brands.

Honda GX160 Engine 5.5 2.5" long shaft 3/4" diameter

The product is a used Honda GX160 engine with a 5.5 horsepower, 2.5" long shaft, and 3/4" diameter., specifically for industrial and commercial applications. Honda is a well-known brand for its reliable and durable engines, making this product a reliable choice for those in need of a sturdy and efficient power source for their equipment.

Wacker Neuson WP1550 Vibratory Plate Compactor – Wacker Neuson WP1550

Wacker Neuson WP1550 vibratory plate compactor for sale. Machine starts easily, runs strong, and compacts well. Water tank is not included. NEW DRIVE BELT. Engine cage is loose and could use tightening or repair.

Wacker Neuson BS60-2iPLUS 2-Cycle Rammer Tamper Jumping Jack Compactor

Wacker Neuson BS60-2iPLUS 2-Cycle Rammer Tamper Jumping Jack Compactor

Wacker Jumping Jack BS50-2i, BS60-2i, BS70-2i Ignition Coil Module - Part 154037

TILLOTSON CARBURETOR MT19A MT 19 A CARB SMALL ENGINE VINTAGE ANTIQUE OEM PARTS

All parts are used unless stated otherwise. Used parts are not perfect and need restoration, repair or rebuild. We do our best to take lots of clear pictures. MAKE SURE THIS IS CORRECT FOR YOUR APPLICATION BEFORE YOU BUY!

Wacker Neuson 2440 Clutch

This clutch is from a Wacker 2440 plate compactor that had been removed from service and parted out. It's a bit dirty with some surface rust. The bearing seems to spin freely and smoothly. The shaft appears to be 3/4". It is untested but presumed to work- if you have issues let me know.

MB Companies Walk Behind Sweeper Broom Brush - Honda Engine - Needs Fix

Engine does start right away and runs. - Engine may need carb work. - It needs tires.

Multiquip Mikasa MTX-60 Rammer Tamper Jumping Jack Walk-Behind Compactor

Multiquip Mikasa MTX-60 Rammer Tamper Jumping Jack Walk-Behind Compactor

Wacker Neuson 5100016851 Compatec Control Display Trench Roller Compactor OEM

Multiquip MVC-77 Walk-Behind Vibratory Plate Compactor VIBRATOR ASSEMBLY

As pictured ready to install note this would be shipped gound not priority shipping

TILLOTSON CARBURETOR MT MT78A (parts Only Missing Parts)

Please review photographs carefully for condition and compatibility

Wacker Neuson WKR-BS70-2 Crankcase for Trench Rammers OEM

Wacker neuson crankcase Unsure condition of bearings Used condition has wear and tear etc Please review before bidding no returns

Recoil Pull Starter Assembly Housing for WACKER WM80 Used OEM

Used wm 80 recoil rough shape Please review before bidding no returns

Wacker Neuson BPU5545A Reversible Plate Compactor – Honda GX390 – FREE SHIPPING

WACKER NEUSON BPU5545A REVERSIBLE PLATE COMPACTOR. EXCELLENT CONDITION! This Wacker Neuson reversible plate compactorstarts and runs great. Wacker Neuson Model: 5100009658. Engine: Honda GX390 Gas.

Wacker Neuson WP1550Aw Gasoline Plate Compactor w Water Tank 0007576 PICKUP ONLY

Evansville, IN 47711.

Wacker Neuson BPU5545 Reversible Plate Compactor, Honda Engine!!! WILL SHIP

Wacker Neuson BPU5545 Reversible Plate Compactor. Located in Lynn Haven FL for local pick up.

Mikasa MVC82VGH Plate Compactor

Compactor is being sold for repair. Engine has low compression. It has a new carb and good spark. Well used compactor, but has life left if you replaced the engine.

Bell RT66 Whacker

The Bell RT66 Whacker is a high-quality rammer and tamper designed for compacting soil and asphalt in industrial and commercial settings. This model, manufactured by Bell in the United States, features a powerful 4-cycle engine for efficient operation. With its durable construction and reliable performance, the Bell RT66 Whacker is a valuable tool for various construction and maintenance projects.

WP1540 Clutch complete (OEM) Fits Wacker Neuson Plate Compactor 5000086968

The WP1540 Clutch complete is an OEM product designed specifically for Wacker Neuson plate compactors. Made by Wacker Neuson, the clutch is designed to fit the model WP1540, ensuring a perfect fit and optimal performance. This high-quality part is essential for maintaining and repairing Wacker Neuson plate compactors, providing users with a reliable solution for their machinery needs. Used Condition, cleaning out the garage and no longer need the part

MIKASA MVC60VTHW 4.0 HP Forward Gas Plate Ground Compactor

Wacker Neuson WKR-BS70-2i Piston Ram for Trench Rammers OEM Part 0110350

The Wacker Neuson WKR-BS70-2i Piston Ram is an OEM part designed for trench rammers and tamper models such as the BS45, BS52, BS50-2, BS60Y, DS70, DS720, and BS50-4. This high-quality piston ram is specifically engineered for Wacker Neuson brand equipment, ensuring precise fit and optimal performance. Perfect for construction sites and industrial applications, this piston ram is a reliable replacement part for maintaining and repairing trench rammers and tampers. 0110350

Wheel Kit For Multiquip MVC82VH Plate Compactor

Lightly used custom made wheel kit for Multiquip MVC82VH Plate Compactor. Bolts into existing holes with bolts included. Needs hole drilled in black tubing for rubber bumper and strap to secure to. It can also be bungeed in place if you don’t want to drill a hole.

Wacker Neuson PLATE COMPACTOR DPU 4545 HEH Forward Reverse Hatz Diesel Free Fr8

Nice 2020 wacker dpu 4545 forward and reverse plate Compactor runs excellent cosmetically not the prettiest but this machine only has 180 hours on it and It was just serviced oil and filters and it’s ready for a job site. I’m offering free freight to the lower 48 Commercial address only if you have a residential address and need liftgate service there will be a $300 charge for Shipping

Wacker Neuson vintage Bing 33 Carburator 33/14/113

Vintage Wacker Neuson Bing 33 Carburetor Part number 33/14/113 Not a complete assembly, for parts. FREE shipping in the USA 🇺🇸 D4HS

Tomahawk Walk-Behind Plate Compactor Machine - Yellow/Gray

Tomahawk Walk-Behind Plate Compactor Machine - Yellow/Gray

2025 Multiquip MVH-158 Plate Compactor 3 HOURS CAN SHIP

2025 Multiquip MVH-208GH Plate Compactor Nice used condition Shows minor wear and tear Was used for one small job Honda GX 200 gas engine 3 Hours 326 lb operating weight CHECK OUT MY OTHER PLATE COMPACTORS I HAVE POSTED Any questions please ask Can assist is shipping Local pickup in Lynn Haven FL