PrePress Equipment

2 Stoesser Printing Registration Pins 1/4" Fits Ternes Burton Tabs Vintage 8113B

Comparable in quality to Ternes Burton. The two Ternes Burton tabs shown are included. Don't settle for the cheap plastic type that don't hold tabs tightly. Perfect for linoleum block printing and woodcuts.

Scitex 503C27387, 188A08592f Relay Driver Electrical Control Scitex 503C27387

Scitex 503C27387, 188A08592f Relay Driver Electrical Control Scitex 503C27387.

Glunz and Jensen 10062977/ANKARSRUM MOTORS AB KSV 5035/703 D4

The Glunz & Jensen 10062977/ANKARSRUM MOTORS AB KSV 5035/703 is a high-quality prepress equipment designed for printing and graphic arts businesses. With the reputable brand of Glunz & Jensen, this model ensures reliable performance and efficiency in producing top-notch prints. Perfect for companies looking to enhance their prepress capabilities, this equipment is a valuable addition to any printing and graphic arts setup.

ad550 flojet 426988 Ad550/426988 D4

The ad550 Flojet 426988 Ad550/426988 is a prepress equipment designed for use in the printing and graphic arts industry. Manufactured by Flojet, the Ad550 model is a high-quality and reliable option for businesses looking to enhance their printing capabilities. With its efficient performance and innovative design, this product is essential for achieving professional results in a variety of printing applications.

JUST Normlicht Color-Match 5000 Combi Viewer D50 Prepress Light Booth

Professional color-viewing station for evaluating film slides, transparencies, proofs, and prints under standardized D50 5000K lighting. Features independent dimming controls. Works. Dimming works fine in both directions, but needs to be just a touch (like 1/32")from the edge on the dimmest position or it causes it to flicker sometimes. I suspect the slider could be cleaned, but really not necessary. Works fine in all other positions, just a little quirk.2 small dents in the middle of the top cover to the right of where it says "Color-match 5000" Maybe some other lights scuffs.

Duarte Demon Register Punch SP36-T204K Plate Punch for Heidelberg Hamada

The Duarte Demon Register Punch SP36-T204K Plate Punch is a high-quality printing and graphic arts equipment designed for precise punching of plates. As a table-top plate puncher, this product is ideal for use in prepress setups, such as those by Heidelberg and Hamada. With the trusted brand of Duarte, you can rely on this plate punch to deliver accurate and consistent results for your printing needs.

Lot of 3 -StepSyn stepping motor SANYO DENKI 103H6704-5040

The list is for a lot of 3

VINTAGE LUDLOW COMPOSING STICK 22 Pica

The Vintage Ludlow Composing Stick 22 Pica is a metal tool used in the printing and graphic arts industry for printer proofing. This composing stick, with its 22 Pica measurement, allows for precise and accurate layout of text and images for printing projects. Its durable metal construction ensures long-lasting use, making it a reliable tool for professionals in the prepress equipment industry. Perfect for creating detailed and professional printer proofs, the Ludlow Composing Stick is a valuable asset for any printing business.

Rampage Systems MWI 1425 1426 PCI SCSI Plugin Adapter PCB

Up for sale is one used, un tested and sold in working order featuring a Rampage Systems MWI PCB 1425 1426 MWI pcb MWI.

Scitex Dolev 800 Imagesetter, Computer-to-Film (CTF) Laser Diodes

Image setter works has not been run in two years. It requires two new rollers for the film feed. Buyer is responsible for moving this item.

Daige ProCote 2000 Hand Waxer Adhesive Applicator ProStik Wax Untested With Wax

Daige ProCote 2000 Hand Waxer Adhesive Applicator ProStik Wax Untested With Wax. This is being sold untested. Comes with box of wax. Appears all in good condition. Same day handling on order before 7am EST. Next day on all other orders. 30 day buyer paid returns

Ludlow Composing Stick 22 Pica Excellent Condition Vintage

The Vintage Ludlow Composing Stick 22 Pica. Excellent condition.

Ludlow Composing Sticks 67 pica (italic) & 45 pica regular. Vintage

The Vintage Ludlow Composing Sticks are a set of metal tools used for creating printed material, specifically for proofing purposes. These sticks come in two sizes: 67 pica (italic) and 45 pica (regular). The digital proofing type of these composing sticks is a printer, making them a valuable tool for those in the printing and graphic arts industry. With their durable metal construction, these Ludlow Composing Sticks offer precision and accuracy for creating high-quality printed materials.

Agfa Azura C95 Plate Washout/Gumming Unit

Agfa- Screen PT-R 4000,4100,4300,8000 CTP Laser Diode

Pulled cleaned and tested. Many available.

ECRM Laser Head Assembly AO3131332-08 Laser NDHV310APCE1 Pulled Working from CTP

The ECRM Laser Head Assembly AO3131332-08 Laser NDHV310APCE1 is a crucial component for a MAKO CTP II laser printer, designed for computer-to-plate printing. This assembly is specifically tailored for use with capstan platsetters and DPM plates, ensuring precise and high-quality printing results. With its technical specifications and compatibility with CTP technology, this laser head assembly is a reliable choice for businesses and industrial printing applications. I have 3 of these

Architect Drafting Three-Sided Drafter's Ruler w/ 10 Scales.

Made of a very hard yet fracture-resistant plastic similar in hardness to Bakelite.

Vtg Set of 2 Carlson Platemaker Register Gauges 1 3/4" x 7/8"

Clean and flat.

Heidelberg Suprasetter autoloader pneumo-electic valves set

The Heidelberg Suprasetter autoloader pneumo-electic valves set is a high-quality printing accessory designed for use with the Heidelberg Suprasetter model. Made by the renowned brand Heidelberg in Germany, this set of pneumo-electic valves ensures precise and efficient automation for prepress equipment in the printing and graphic arts industry. Carefully removed by Tech. We sold the platesetter, when with a processless system, I saved some of the expensive parts. Jim

Scitex Creo Kodax Lotem LDD2 400 800 PCB 503B2L560S 188A2L560B Yair Sharon

Up for sale is 1 pcb, sold 1 per price listed (multiples are available) used, un tested and sold in working order featuring a Scitex LDD2 400/800 pcb assembly. Other part #rs-188A2L560B and or 503B2L560S and boards are also marked with stickers like Yair, Sharon, Yuval and or Borist. Not sure if there is a difference. Note-the 1st 4 sold will come with an attached power wire and the last 2 no power wire. See pics for details and add 17.99 for shipping fedex ground within the Continental USA not including Alaska, Canada, Mexico, HI, PR or any out of country shipments. Extra charges apply

Agfa SBUS to APIS INTFC, P/N 209257-0501 for Imagesetter or CTP SUN Micro SBUS

Goes from a SBUS computer slot to an Imagesetter or CTP. for Imagesetter or CTP. SBUS to APIS INTFC. Agfa SBUS to APIS card. SUN Micro SBUS.

VTG Typesetting Printer The Star Rule 6/12 Pt Metal Printing Automatic Saw RARE

The Automatic Saw Co. is the earlier version. The images I’ve shared show a "Star Rule," a tool used in letterpress printing and typesetting. It also aids in making corrections and removing type. Before graduated composing sticks, the Star Rule was used to set line length.

U1150073-10 Laser Diode Block 2-pin for Screen PT-R ( Agfa Fuji Topsetter CTP )

Agfa Acento & Avalon: Acento S, E, IIE, IIS / Avalon N8. This is a 2-pin version diode. Laser Diode Block Assembly – Part No. Fuji Luxel: T-6000, T-6300, T-9000 series. Screen PlateRite (PT-R): 4000, 4000II, 4100, 4300, 4300E, 4300S, 8000, 8000II, 8100, 8300, 8300E, 8300S.

VTG 1933 G-S Crystal Gauge Germanow-Simon Printing Flexo Screen Tool w/ Sleeve

• Gauge for G-S Flexo Round Crystals. • G-S Crystal Gauge. • Original G-S Crystal Gauge. • Printing and scale markings remain clear and readable.

EXPHYE interface board for Screen PT-R CTP Platesetters. Heidelberg Agfa_ PIF

EXPHYE PIF interface board for OEM (Heidelberg, Agfa, Fuji) Screen PT-R CTP platesetters.

Spin Motor 332051, Used

Spin Motor 332051.

Kodax Creo Lotem 400 800 Series Platesetter Fiber Coupled IR Laser Diode

Up for sale is one used, un tested and sold in used and working order featuring ONE Diode sold ONE per price listed featuring a Kodax Creo Lotem 400 800 series platesetter fiber coupled IR Laser Diode.

Procote paper waxer

Daige ProCote 2000 Hand Waxer Adhesive Applicator ProStik Waxer. Heats up and I rolled a thin layer of wax onto paper.

QEA IAS-1000 Image Analysis System – Motion Control/Electronics Control Box Only

The IAS-1000 is a bench-top system designed to performautomated, objective image quality analysis on printed materials produced by virtually any printing technology. Because this is a specialized industrial component, it is being solduntested beyond basic power-up.

Scitex Narkis CPU & SCSI 4/M 503D2L046S 188A3H004D PrePress Equipment

Our Policies of Trade. Location: Kibbutz Beit Rimon, Israel. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Best Regards.

CREO KODAK SCITEX NUC Board 188A2L182D 503C2L182S For Lotem E-Box

All of our inventory is located in our warehouse, in Israel.

Sensor SICK Ótico

Diodos para CTP Agfa Niágara funcionando perfeitamente, tenho diodos, placas de servo motores dessa marca.

Creo Fusion IN 503-00351A 250-00351C-A Board

This board is used in working conditions.

Lotem 504S1L897 Solenoid door Latch Creo Scitek Kodax

Up for sale is one used door latch sold 1 latch per price listed featuring a Lotem 504S1L897 door latch. Qs eight for seven two one seven fiv fiv for six.

Tie Dye Jerry Garcia Lightening Bolt TShirt Large Grateful Dead Creo PrintCo

This rad shirt is by Creo PrintCo in Wilmington, NC.

Screen CTP PT-R 8ххх trail edge clamps set (USED), Fujifilm

Screen CTP PT-R 8ххх trail edge clamps set (USED),

GretagMacbeth iCPlate Plate Analyzer w/ Software & Cable

Used in excellent condition.

Limiting aperture for X-Rite i1Pro and EFI ES-1000 spectrophotometers ( for M0 )

This one won't work.

Gluntz& Jensen Quartz III 85 Thermal Processor

Thermal CTP Plate Processor QuartZ III 85 Location Alabama

Mimaki CJV300-130 Print Head

The CJV300-130 Print Head is a high-quality printing device designed for professional use in the printing and graphic arts industry. Pulled from a machine. Most colors work. Should clean up good.