Data Acquisition & Loggers

MadgeTech RHTemp1000IS Humidity & Temp Data Logger

as pictured; tag will vary; model number all the same;

Vector VN1630A CAN/LIN Interface - Full Kit with Driver Disk and Manual

Model: VN1630A (Advanced High-Speed Interface). Condition: Excellent, complete retail set. Includes: VN1630A device, original USB cable, Vector Driver Disk, and Quick Start Guide. Shipping: Fast shipping from Clinton Township, Michigan.

Agilent 34970A Data Acquisition Unit w/ HP 34908A Module Tested Working

Agilent 34970A Data Acquisition / Data Logger Switch Unit in tested working condition. Unit has been tested and verified operational. Includes one HP 34908A 40-Channel Single-Ended Multiplexer Module installed.

HP Agilent HP 34970A Data Acquisition Switch Unit (OVF60)

No accessories including standard power cord/cable. Powers up! We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.

National Instruments, NI cDAQ-9174(CompactDAQ Chassis

For NI products! We are professionals! We will give you a quote! transport：.

National Instruments NI-9208 Current Input Module

Avago LSI SAS9305-16e 4 port 16 channel HBA PCI-E3.0 x8 High Profile SKU 13870

Model: AVAGO SAS9305-16E. Manufacturer: AVAGO. Key Functions Working (Appendix C - Test and Repair). Hardware required for key functions to be tested may have been removed after testing (e.g., Hard Drive).

National Instruments NI PCIE-8362 MXI-Express Device Remote Control 191376C-01

We will send you a new one after receiving the defective item. It will just take you 1 minute.

[USED]Vector GL5350 CAN/LIN Data Logger module Usa without drive

The Vector GL5350 CAN/LIN Data Logger module is a reliable and efficient tool for recording and analyzing data from vehicles. With its compact design and compatibility with various CAN and LIN protocols, this data logger is perfect for troubleshooting and diagnostic purposes. The Vector brand ensures quality and accuracy in capturing vehicle data, making it a valuable asset for automotive professionals.

Campbell Scientific CR800 Data Logger

It collects data from connected sensors, processes the information internally, and transmits it through various communication interfaces. Optimized for remote installations, it can operate for extended periods on battery power, often paired with solar panels.

NI 9220 16 AI ±10 V 16 Bit 100 kS/s analog input module CompactDAQ Spring Termin

Up for sale is 1 (ONE) pre-owned NI 9220 16 AI ±10 V 16 Bit 100 kS/s analog input C Series module for CompactDAQ or CompactRIO chassis. The NI 9220 is an analog input module for CompactDAQ and CompactRIO systems.

Campbell Scientific CR800 Measurement and Control Datalogger, Works Fine

Low power consumption allows the CR800 to operate for extended periods on a battery. instructions support algebraic, statistical, and transcendental functions for on-site processing.

National Instruments NI PXI-2565 General Purpose Relay Switch Module

Agilent 34970A Data Acquisition Data Logger Switch Unit Tested No Cards

Agilent 34970A Data Acquisition / Data Logger Switch Unit in tested working condition. Unit has been tested and verified operational. • Model: 34970A. • Agilent 34970A Data Acquisition Unit. • Data Acquisition / Data Logger Switch Unit.

National Instruments NI PXIe-8108 Embedded Controller Comes With Controller Only

DataQ Instruments DI-145 Four-channel USB Data Acquisition Starter Kit

Pre owned in good used condition see photos

NI National Instruments SCXI-1520 Universal 8-Channel Strain Bridge Module

National Instruments GPIB-USB-HS Interface

Refer to the photos for installed options. What is included.

Agilent 34970A Data Acquisition Meter 3 Slot《Working》Priced To Sell (Obsolete)

This unit is in perfect working condition. Does not include multiplexer. The Agilent 34970A Data Acquisition/Switch Unit is a versatile and reliable system for collecting and analyzing data. With its 34901A 20‑Channel Multiplexer capability, this unit allows for efficient switching between channels for precise measurements. The Agilent brand ensures high quality and precision, making it a trusted choice for professionals in various industries. This unit is essential for those requiring accurate data acquisition and switching capabilities in their work.

1PC Used National Instruments NI-9234 Sound and Vibration Input 779680-01

NI ETTUS RESEARCH USRP B210 SDR 2 x 2, 70 MHz to 6 GHz MOTHERBOARD

For NI products! We are professionals! We will give you a quote!

PASCO Sparklink Air Interface, PS-2011

The SPARKlink® Air allows students and teachers to connect any of our 70+ PASPORT sensors to their device via USB or Bluetooth®. Things You Should Know:An item that may have been used previously. It looks really good.

EBRO EBI 10 Mini Temperature Data Logger Rigid metal 150C Case of 10

Cal sticker sheet included as shown.

Vintage Bacharach Tempscribe 14-0075 Circular Temperature Charts Full

98 sheets appear to be unspent, crisp, and clean circular paper charts out of the original 100-count lot. 2 pieces on the bottom had a small issue as noted in the picture.

DATAQ Instruments DI-2108 High Speed DAQ

MIDE Slam Stick Shock Vibration Data Logger LOG-0003-16G-8GB-PC

At Silicon Salvage, we turn the complex challenge of e-waste into a clear, secure, and sustainable process. — the answer is Silicon Salvage. One step toward a cleaner, safer future. Silicon Salvage is not an affiliate, representative, or authorized distributor for any manufacturer listed unless explicitly stated.

Used National Instruments NI-9234 Sound and Vibration Input 779680-01

For NI products! We are professionals! We will give you a quote!

Barton Temperature Element 0-150F 10ft long

Synergy Data Acquisition System Model P

This unit has been in storage for few years. It will come as pictured . The Synergy Data Acquisition System Model P is a high-quality data acquisition unit designed for various industrial and business applications. With its reliable brand reputation and specific model number, this system offers precise and efficient data collection capabilities. Ideal for analyzing and inspecting test and measurement results, the Synergy Data Acquisition System Model P ensures accurate and dependable performance for all your data acquisition needs.

Agilent 81635A Dual Optical Power Sensor, 800 to 1650nm, -80 to +10dBm

Dual InGaAs detector for low noise and low wavelength dependence. Polarization dependence of <±0.015 dB. Power uncertainty of ±3%. Wavelength range 800 nm – 1650 nm.

NI PXIe 1073 National Instruments Chassis 5 slot

AD Instruments PowerLab 26T Data Aquisition Unit Teaching Series ML856

The sale of this item may be subject to regulation by the U.S. Food and Drug administration and state and local regulatory agencies.

National Instruments PCI-6602 High-Speed & Timing Digital I/O Acquisition Card

Excellent condition.

National Instruments NI 9234 4-Ch 24-Bit IEPE Sound Vibration Input Module

Features 24-bit resolution, 102 dB dynamic range, 51.2 kS/s per channel simultaneous sampling, and built-in anti-aliasing filters that automatically adjust to sampling rate. Compatible with CompactDAQ and CompactRIO chassis.

Esterline Angus Miniservo Power Survey Demand Recorder MS411B S-22087-1B READ

Used in good condition with case, NOT FULLY TESTED but turns on. Please message me any questions you have.

National Instruments NI USB-6210 Multifunction I/O Device, DAQ, Data Acquisition

It includes the USB cable shown with ferrite chokes to protect it from transient noise. so that we can resolve the isssue.

National Instruments NI SCXI-1120 8 Channel Isolation Amplifier

GaGe CompuScope CSE1621-1GS PCIe Digitizer 2-Channel 1GS/s Data Acquisition Card

CompuScope Series. One GaGe CompuScope CSE1621-1GS card only. Manufacturer: GaGe. High-Speed Digitizer / Data Acquisition Card. 2 Analog Input Channels (CH1, CH2). This card was part of an operational setup and is being sold as a used working unit.

National Instruments NI PCIe-6738 Analog Output Module

ADInstruments MacLab/2e Data Acquisition Module System

The ADInstruments MacLab/2e Data Acquisition Module System is a high-quality data acquisition system designed for precise measurements and analysis in a variety of scientific, industrial, and business applications. With the MacLab / 2e model, users can collect and log data with ease and accuracy. This system is popular among professionals for its reliability and compatibility with a range of instruments and devices. ADInstruments is a trusted brand known for producing top-notch data acquisition systems that cater to a wide range of users and industries.