Replacement Parts

2 Pinball DMD Display Boards Cherry Data East Untested As Is See Photos To ID

The product is a pair of untested 2 pinball DMD display boards from Cherry Data East, specifically designed for Williams pinball machines.

Hurricane Juggler Playfield Assembly Used Williams Pinball Machine Parts 31-1637

Up for your consideration is a Hurricane Juggler Assembly.

Bally Rolling Stones Pinball Machine Translite Backglass G2U

Check item specifics and photos to ensure you make the perfect choice.

Revenge from Mars Pinball Monitor

Data East SEGA Pinball Mpu Board 520–5003-04

Refurbished Data East / SEGA MPU Board. Part #520-5003-04 Fully tested. Working 100% NVRAM installed. No Eproms included.

Williams Pinball, Coils, Solenoids, Good Used You Choose Them From My List Below

You Choose Which One! Here is the long list of Williams solenoids (coils). Why buy new when used will do. I will send it with a sleeve when applicable. Get them quick. Qty 6 3-24 -700 (old shuffle alley score reel coil).

Atari Pinball Machine Superman EPROMS - Three (3) EPROMS included

REMINDER: ! Not all boards can be repaired ! Replacing these EPROMS on a broken or defective MPU board will. Model Boards: Atari Pinball Model 2 - MPU. Model 2 Pinballs: Superman. Picture: Display what the three EPROM set you will recieve.

SEGA WHITESTAR CPU/SOUNDBOARD # 520-5136-00 REV D USED NOT WORKING FROM SPACEJAM

YOU ARE BUYING A USED NON WORKING SEGA WHITESTAR CPU/SOUND BOARD # 520-5136-00 REV D AS-IS.

Pinball Data East Power Supply Board 520-5000-00 - For Parts or Repair

Selling for parts, or can likely be repaired as board and traces look clean. Selling as-is, as-pictured.

Bally / Williams Pinball DMD, Used Tested Working

Pulled from Fish Tales, works 100% no issues

Bally Old Chicago Pinball Machine Pop Bumper Assembly w/switch & AP 27-1300 Coil

Bally Old Chicago Pinball Machine Parts. Good Condition as pictured.

Stern SB-300 Sound Board Pinball Tested 👀 VIDEO 👀

Here is for sale an original, used Stern SB-300 sound board. SPECIAL NOTE: If you have sound problems in your machine, confirm that your ribbon cables are correctly positioned (pin 1 on the sound board goes to pin 1 on the CPU and so on) and that there is continuity from one end of the connector to the other end of the connector for all of the pins.

Original Bally EVEL KNIEVEL Pinball Plastics (Incomplete Set 8 Pieces)

Here is for sale an original, used lot of plastics for a Bally EVEL KNIEVL pinball machine. This is not a complete set of plastics: two of them are missing and not included (small clear plastic and the plastic that goes over the eject hole).

SpaceShuttle pinball playfield

The Space Shuttle Pinball Playfield is an original from Williams' 1984 pinball machine. The play field was sealed and inserts polished before hard top was installed. Including three original side rails.

Pinball Coin Door Lock, Standard 7/8" Length, With 1 Bally Key, Quick Shipping.

I believe that these are Fort locks that were keyed for use with the Bally keys. After installation, you can, if need be, slightly bend the cam (latch piece) a bit to perfectly have the door not rattle when your done.

JAMES BOND OO7, 60th ANNIVERSARY, STERN, SERVICE AND OPERATION MANUAL

60th Anniversary. SERVICE AND OPERATION MANUAL. Manual Is Bound and Has Clear Vinyl Covers.

Stern 5 Drop Target Bank Assembly Pinball

Here is for sale an used drop target assembly removed from a Stern HOT HAND pinball machine. This assembly holds five drop targets The targets installed are 45+ years old and will likely need to be replaced sooner than later.

5, Push In Lamp Sockets, Fits a 5/8" Hole, Use With 555, & 906, Wedge Base Lamps

Soldering wires to the socket is required for them to work like they should.

Williams Pinball Used Flat Black Drop Target, 03-8036, Comet? Quick Ship.

Williams part number 03-8036. It does help both of us.

Deadpool - LE/Prem, STERN, SERVICE AND OPERATION MANUAL

SERVICE AND OPERATION MANUAL. Manual Is Bound and Has Clear Vinyl Covers.

Broken? Space Mission Playfield Pinball Plastic Part Bp1

Used pinball plastic as pictured

Bally Pinball Knocker Assembly

You are buying these per piece. Let me know which one(s) you want when buying. One of these came out of a Bally On Beam and has a 27R11 coil. The other is from an unknown machine and had a C-27-1100 coil.

Bally Pinball, Coils, Solenoids, Good Used, You Choose Them From My List Below

Here is the long list of Bally relays &solenoids (coils). You Choose Which One! Why buy new when used will do. I will send it with a sleeve when applicable. Get them quick. Qty 2, A0-27-1300. Qty 1, BF-27-1250 Qty 11, G-32-2500.

Gottlieb EM Pinball 10 Position Male/Female Jones Plug Connector Set Circa 1968

As shown.

Gottlieb’s Jacks Open Original Pinball Backglass 1977 Framed #60164 25.5x23.5

Model No.: 60164. A rare, one-of-a-kind piece that is ready to hang as-is or removable for machine restoration. Details: Original 1977 backglass — not a reproduction. Digital clock display powers on.

Merkle-Korff Gear Co. Motor Flexo-Action SG15 Jukebox Pinball Mechanism. Works!

Not sure exactly what this is, but it does run. Weighs 5 lbs

Gottlieb Fast Draw EM Pinball Coin Chute

Here is for sale an used coin chute removed from a Gottlieb FAST DRAW pinball machine.

Gottlieb MPU to Solenoid Board Connector Cable, Used on all System 1 Games.

Genuine Gottlieb Part. I have given it a bath and cleaned it up. It does help both of us.

Bally Fireball HOME EDITION Pinball Machine Game Backglass ORIGINAL

Good condition used pinball machine backglass. Good shape, but not perfect, see pics, could have surface imperfections and scratches from age, use and shelf wear. Sold as-is.

Unknown Bally Williams Pinball Transformer 437P5O 549-9544 Original Parts

You'll be able to see if that is the case by looking through all of the item photos I uploaded.

Sega Whitestar I/O Power Driver Board 520-5137-00

Sega Whitestar I/O Power Driver Board 520-5137-00

Vintage Pinball Backglass Bumper Game Complete ORIGINAL 18" x 7"

Vintage Pinball Backglass Bumper Game Complete ORIGINAL

Early Bally Pinball, 1950's Relays & Coils, You Choose Which One From My List

Older Bally Pinball, Relays, Coils, Solenoids, Good Used, You Choose Which One! Get them quick. Available Older Early Bally Pinball Coils It does help both of us. Qty 1, 116-353. Qty 1, 116-352. Qty 1, 32 K-50.

(2) Gottlieb EM Pinball Coin Slot Plastics w/25 Cent Inserts

As shown, could use a good cleaning. No signs of damage to plastics, 25 cent inserts a bit rough as shown.

Williams Pinball Promo Plastics Lot of 10 Promotionial Key Fob Key Chains

Plastics are old and in good shape could have minor odor, surface Imperfections from age and storage wear. Have been in storage for over 30 years.

POSTS PINBALL PLAYFIELD PLASTIC WHITE SMOOTH SIDE POST 1 "

THESE PIECES ARE ORIGINAL, NOT A REPRODUCTION. SEE PHOTOS. ALL PHOTOS ARE OF THE ACTUAL ITEM. I am not an expert and describe these things as I perceive them. I am a GIA certified gemologist. Alaska, Hawaii and Puerto Rico will probably be higher.

Williams Bally Stern Pinball Machine Playfield 5/8 x 1/2 In Plastics Metal Post

See theFIRST picture for an example of the polished pieces, the rest are not polished. Good shape but not perfect, see pics, will have surface imperfections and scratches from use and shelf wear. Sold as is.

WILLIAMS FLASH Pinball Machine USED Plastic

You are looking at a used plastic removed from a William's FLASH Pinball Machine.

Bally's Nip-it Pinball Machine (1972)

Gottlieb FREDDY'S Krueger's pinball House Molding Midway WILLIAMS BALLY STERN

Pay hundred and over for a fake mod, or get the original. It needs a little bit restore.As you can see, nothing, super glue cannot fix. 2 broke tabs at the top as you can see. Your skill are needed to restore it :) check my other parts. OBO