Blade Parts & Supplies

Spyderco Para 3 Scales – Skinny Titanium

This is for a set of skinny titanium scales for the Spyderco Para 3. They are precision milled by AWT/ Applied Weapons Tech from 6AL4A titanium with a smooth, flat surface and a stonewash finish. I put these on my para 3 but decided I liked my original scales better.

Canvas Micarta Slab 35 Lbs Knife Machete Handle / Scales Material

Lot of 7 Large Deer Antler Burr Pieces 6.5”-7” Knife Handle Blanks Craft Grade

This listing is for seven deer Antler crowns they measure between 5 inches and 7 inches in length. Most of the diameter are three-quarter inch to 1 inch perfect for knife handles stock up now so you have them for your projects. Thanks for looking Jason. 

Benchmade Bugout With Titanium Scales

Custom Benchmade Bugout with Titanium scales. SV90 blade. Sooo smooth.

Seizo Imai Seki Japan 6.5" Loveless Style ATS-34 Fixed Knife Making Blade Blank

During the latter part of his life, Imai focused on creating stunning Loveless-style knives, and also sold them as knifemaking kits. This blade and guard combo are the last you will find in this style from this master knifemaker.

Seizo Imai Seki Japan 6.5" Loveless Style ATS-34 Fixed Blade Blank Knife Making

This is an original unfinished rough ground knife blade blank by Seizo Imai in Seki, Japan circa early 2000s. This blade has not been heat treated/hardened. Overall length is 6.5" and the blade is 3" long.

Vintage Schrade Imperial M-7S Fixed Blade Knife Making Guard Part 3/16 or 1/4"

This was made to fit the M-7S combat knife (as shown in the last picture). You can easily grind the opposite side to a point like the other, or even grind the top off to make a single side finger guard.

Seizo Imai Seki Japan 7" Loveless Style ATS-34 Fixed Blade Knife Making Blank

This is an original unfinished rough ground knife blade blank by Seizo Imai in Seki, Japan circa early 2000s. This blade has been heat treated/hardened. Based on Loveless's popular "City Knife", it is made of ATS-34 and is hollow ground with tapered tang.

Seizo Imai Seki Japan 8.375 Loveless Style ATS-34 Fixed Blade Knife Making Blank

During the latter part of his life, Imai focused on creating stunning Loveless-style knives, and also sold them as knifemaking kits. This blade and guard combo are the last you will find in this style from this master knifemaker.

Nickel Guard Bolster of Loveless Style Imai Japan Knife Making Fixed Blade Blank

During the latter part of his life, Imai focused on creating stunning Loveless-style knives, and also sold them as knifemaking kits. His collaboration with Parker spanned nearly two decades. His custom Loveless style knives are works of art.

Vtg 1990 Case XX Rio Grand Bowie 10" Fixed Knife Blade Blank & Guard

This is a Case XX 1990 Rio Grand bowie knife unfinished blade blank. It is satin finished stainless steel and is unsharpened with 1990 tang stamp and has a tapered tang. Tapered tang may be slightly uneven and require grinding to achieve tapered tang.

Seizo Imai Seki Japan ATS34 Mamba Lockback Blade Blank Folding Knife Making Part

These are unfinished folding knife parts from the Seizo Imai factory in Seki, Japan made circa 1990s. The blade is rough ground and has not been heat treated/hardened. These need finished, fitting, and assembly.

DIY Knife Making Blade 3 Pack 1.5x7x3/16 Inch

3 blank blades approximately 7" long 3/16 thick 1.5" wide tips have been ground on

Spyderco Manix 2 Bronze Metal Knife Handle Scale

The Spyderco Manix 2 Bronze Metal Knife Handle Scale is a collectible blade part designed to enhance the handle of a knife. Made of durable metal with a sleek bronze color, this scale adds both style and functionality to the knife. Perfect for knife enthusiasts looking to customize their collection, this handle scale is a unique and high-quality accessory for any knife.

Seizo Imai Seki Japan 6.5" Loveless Style ATS-34 Knife Making Fixed Blade Blank

During the latter part of his life, Imai focused on creating stunning Loveless-style knives, and also sold them as knifemaking kits. This blade is the last you will find in this style from this master knifemaker.

Seizo Imai Seki Japan 8" Loveless Style ATS-34 Fixed Knife Making Blade Blank

This is an original unfinished rough ground knife blade blank by Seizo Imai in Seki, Japan circa early 2000s. This blade has been heat treated/hardened. Overall length is 8" and the blade is 4" long.

Chris Reeve knives CRK Stock Clip ZircBlasted & 6G Titanium SandBlast - Pins

Large CRK Sebenza Pin and Lanyard no Bead. Large CRK Sebenza Pin (no lanyard) Made in USA. 6G Stonewash Ti Clip.

Seizo Imai Seki Japan ATS-34 Jess Horn Lockback Folding Knife Making Blade Blank

His collaboration with Parker spanned nearly two decades. His custom Loveless style knives are works of art. This is one of these rare finds. This is the Jess Horn folder pattern. Perfect for the knifemaker!

Seizo Imai Seki Japan 8.37" ATS-34 Loveless Style Fixed Blade Knife Making Blank

During the latter part of his life, Imai focused on creating stunning Loveless-style knives, and also sold them as knifemaking kits. This is the last you will find in this style from this master knifemaker.

Custom RGT V2 Titanium Clip For Spyderco PM2 Paramilitary 2 (no Knife)

Custom RGT V2 Titanium Clip For Spyderco PM2 Paramilitary 2 (no Knife). Pocket clip is pre-owed in excellent condition. Comes with 3 titanium screws.This is a titanium clip, very unique shape and retail for $50. RGT is one of the USA clip maker. Ship promptly with USPS ground advantage.

(2) Original OEM Benchmade Bugout Grivory Handle Scales Blue And Crater Blue

(2) set of factory Benchmade Grivory handle scales for the Bugout knife. Both sets are in very good condition / lightly used. Blue and crater blue. No other hardware included.

Seizo Imai Seki Japan ATS-34 Bullet Lockback Folding Knife Making Blade Blank

These are unfinished folding knife parts from the Seizo Imai factory in Seki, Japan made circa 1990s. The blade is rough ground and has been heat treated/hardened. His collaboration with Parker spanned nearly two decades.

German WW1/Pre WW1 Dress Sword Handle Top Part Pommel.

German WW1/Pre WW1 Dress Sword Handle Top Part Pommel. Brass made. Please check the pictures for condition, you will get what you see. If any questions please contact me. Don’t ship out of 48US. Thank you

Vintage Hattori Seki Japan Tanto Fixed Knife Black Rubber Handle Part

Hattori produced tanto handle. This handle part was produced by Hattori for the Cold Steel tanto that the factory produced during the 1980s-90s. Model: Hattori produced tanto handle. Blade: N/A" long, N/A.

Benchmade 945 Mini Osborne Flytanium Handle Scales - Jade G10

These was purchased new installed and did not like the look. Was never carried listed as used but still in new condition.

German WW1/Pre WW1 Dress Sword Handle Top Part Pommel.

German WW1/Pre WW1 Dress Sword Handle Top Part Pommel. Brass made. Please check the pictures for condition, you will get what you see. If any questions please contact me. Don’t ship out of 48US. Thank you

Seizo Imai Seki Japan 6.25" Loveless Style ATS-34 Fixed Knife Making Blade Blank

This is an original unfinished rough ground knife blade blank by Seizo Imai in Seki, Japan circa early 2000s. This blade has not been heat treated/hardened. It is made of ATS-34 and features a hollow ground blade and tapered tang.

Vintage 1990 Case XX Rio Grand Bowie 10" Fixed Knife Blade Blank.

New old stock blade unsharpened as pictured no guard included.

Custom Wood Knife Handle Scales w/ Mounting Screws - Ergonomic Vented Design

The handle scales are crafted from wood, providing a unique and natural aesthetic to the knife. The set includes mounting screws for easy installation, making it a convenient and practical customization option for knife enthusiasts looking to enhance their blade's functionality and appearance.

2 Peices Of Recycled , Repurposed Skateboards , For Knife Handle Blanks, Grips ,

NOS Antique Sword Cross Guard Crown Freemason? Fraternal #5

NOS Antique Sword Crossguard Crown Freemason? Fraternal #5 I have just picked up a small collection of NOS sword cross guards and other metal parts. Please be sure to check out my other listings. This lot is for a cross guard featuring swords going through a crown symbol. I’m not sure if it’s a Freemason symbol or perhaps another fraternal organization. Piece measures roughly 4.5 inches wide, in very nice unused condition with some light age wear to the metal. Ships well packaged, fast and free with USPS Priority Mail.

Knife Handles Faux Resin Elk Stag Knife

Age unknown. Maker unknown.

Nickel Guard Bolster of Imai Japan Loveless Style Knife Making Fixed Blade Blank

During the latter part of his life, Imai focused on creating stunning Loveless-style knives, and also sold them as knifemaking kits. His collaboration with Parker spanned nearly two decades. His custom Loveless style knives are works of art.

2 Pieces Parts Knives

The product is a set of two pieces stainless steel knives with a full tang design for durability and stability. The black color and reproduction status add to the collectible aspect of the knives, making them a desirable addition for knife enthusiasts and collectors.

Original Set of WW1 British M1907 SMLE Bayonet Grips-Government Marked!!

Vintage Winchester Seki Japan Loveless Style Fixed Knife Making Blade Blank

Has a tapered tang but only ground on one side with other side still needing ground. This is a limited edition knife blade and serial number will vary. Made for a large guard and bottom of blade is notched for it - guard not included, blade only.

Vintage Seizo Imai Seki Japan Replacement Lanyard Ring Fits Buck 184 Buckmaster

This is the lanyard ring part from Seizo Imai's "Imax" Survival knife. It also fits the Buck 184 Buckmaster. His collaboration with Parker spanned nearly two decades. His custom Loveless style knives are works of art.

Seizo Imai Seki Japan 7 Loveless City Style ATS34 Fixed Blade Knife Making Blank

This is an original unfinished rough ground knife blade blank by Seizo Imai in Seki, Japan circa early 2000s. This blade has not been heat treated/hardened. Based on Loveless's popular "City Knife", it is made of ATS-34 and is hollow ground with tapered tang.

Benchmade Bugout Metonboss Zirconium Scales

Benchmade mini Bugout with Metonboss zirconium scales. Includes box with original scales

NOS Antique Metal & Enamel Cross & Crown Fraternal Sword Handle Accent Piece #8

NOS Antique Metal & Enamel Cross & Crown Fraternal Sword Handle Accent Piece #8 I have just picked up a small collection of NOS sword cross guards and other metal parts. Please be sure to check out my other listings. This lot is for a really nice metal and enamel sword and cross sword accent piece. Im not sure if this would have been used on the scabbard or not. As you can see this has some very very light surface wear. Piece measures a little over 1 inch long by 1 inch wide. Ships well packaged, fast and free with USPS First Class Mail.