Machining
machining — pre-owned
Browse 27,382 machining — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
Five Vintage Precision Measuring Tools. Craftsman 40442., General
What you see in the picture is what you get. The lot is being sold as is. I do not see any problems with the lot, but it is still being sold as is.
VIN HERMANN SCHMIDT TOOL MAKERS PRECISION GRINDING VISE 3"X 6 1/2"OPENS 3 1/2"
THE VISE HAS THREE NICKS ON THE OUTSIDE OF THE VISE BODY THAT WILL NOT EFFECT USE.
machinist tool STARRETT 59 TRAMMEL POINTS w extra arm sections
Starrett Tools. Two sections of arms.
MACHINIST OfCe m LATHE MILL Brass Round Stock 1 3/8" Long by 3 1/2" Diameter
NO EXCEPTIONS.
You save $12.50
PARALLELS MILL 6"L (24 TOOLMAKER MACHINIST .25"-1.5"T PRECISION GROUND NOS MINT
MILL, JIG BORE OR EVEN USE AS A GRIND VISE PARALLEL SET. ALL PARALLELS MORE THAN LIKELY MADE FROM A-2 AS MOST OF HIS TOOLS ARE STAMPED A-2. 24 TOTAL PARALLELS HERE WITH HEIGHTS OF PRECISION GROUND IN PAIRS (12) TO ENSURE PARALLELISM AND SQUARE FACES TO SIDES!
LUFKIN 138 SQUARE #DF DIE-MAKERS USA MACHINIST 5 PIECES NO BOX INSPECTION QA
LUFKIN No.138 DIE-MAKERSSQUARE WITH THE 4 BLADES AS SHOWN. SQUARE AND BLADES ARE NOT ENGRAVED OR ANY OTHER OWNERS MARKS. BELOW ARE SPECS AND CURRENT LIST PRICE FOR A SIMILAR STARRETT 453-E DIE-MAKERS SQUARE WHICH I ALSO HAVE LISTED.
Huge Lot Machine Shop Machinist Tool Drill Bit 36 lb's, small to large set+Taps
We will describe the item to the best of our ability.
Vintage Starrett Measuring Tool Lot C11H-12-49, C11-1224, PT22431, 436P-1, 289C
I only list this as used since I am not the original owner. All of these pieces seem to be in new condition. No marks, scratches, nothing! I will be happy to send them your way.
Moore Tool & Starrett Precision Tapered Hole Leaf Gages, Taper Gauge, Machinist
Complete set of Taper Gauges Range from 1.000” - 2.000” In original wood case Made by Moore Tool and Starrett in USA Very good condition
LUFKIN DIE-MAKERS 138cx SQUARE #Z USA MACHINIST 5 PIECES PAPER BOX INSPECTION QA
LUFKIN No.138 DIE-MAKERSSQUARE WITH THE 4 BLADES AS SHOWN. SQUARE AND BLADES ARE NOT ENGRAVED OR ANY OTHER OWNERS MARKS. BELOW ARE SPECS AND CURRENT LIST PRICE FOR A SIMILAR STARRETT 453-E DIE-MAKERS SQUARE WHICH I ALSO HAVE LISTED.
Lot of Machinist Lathe Tools HSS Taps Drill End Mills Cutters New/Used
Snap-On Tools Diamond Hat Lapel Pin Money
Good condition
Vintage Palmgren Vise Advertising Display 100th Anniversary Chrome Card Holder
Vintage Palmgren Vise Advertising Display 100th Anniversary Chrome Card Holder
Starrett #98 Machining Tool with Original Wood Case
The Starrett #98 Machining Tool is a collectible piece that comes in its original wood case. Known for their precision and durability, Starrett tools are highly sought after by collectors and enthusiasts. This specific tool is a vintage piece that holds historical value and craftsmanship, making it a unique addition to any machining or tool collection. The intricate design and quality construction of the Starrett #98 Machining Tool are sure to impress both amateur and seasoned machinists alike.
Starrett No 12 Protractor Head Center Finder & 8" Inch Brown & Sharpe No 4 Rule
Starrett combination square parts on Brown Sharpe 8 Inch Rule No 4. bin 417
Southwestern Industries TRAV-A-DIAL GB-42 Lathe Travel Gauge .001"
Southwestern Industries TRAV-A-DIAL GB-42 Lathe Travel Gauge .001".
Vintage Starrett No. 98 Precision Machinist Level 8" w/ Original Box - USA
We moved with our 3 children from California to Iowa 26 years ago. Includes Original Box. Good Pre-Owned Condition.
Vintage L.S.S. Starrett 12" Combination Square & Rule & No 492 Protractor AND
The Center finder appears similar to the Starrett, but I do not see a marking. Center finder ALSO MAY HAVE A WORN-OUT PIN AS IT DOES NOT TIGHTEN DOWN AND STAYS LOOSE on the ruler. The level on both the square and protractor is in good used condition and functional.
MACHINIST TOOLS LATHE MILL Watchmaker's drilling tailstock
used starrett machinist tools lot
Lots of odds and ends
YUASA INTERNATIONAL TELESCOPING GAGES 290-100 MACHINIST TOOLS
VINTAGE L.S Starrett Co. No. 92 Carpenter's Divider Compass Dividers 6" NICE
No. 92 Carpenter's Divider Compass Dividers 6" NICE.
Starrett S-828H Center Finder Complete. 5 Pc Set with Box Made in USA
Fast Shipping. We offer free returns on all items. Thank You for your interest in this item.
Vintage Starrett No. 900 Apprentice's Tool Set, Complete w/ Leather Case
Vintage Lufkin No 2504 Combination Square, 4" Rule
Works well, needs cleaning has finish loss, rust.
Vintage General Hardware 6 inch Steel Square Tool No. 270-6 with Original Box
GTD Greenfield 3/8" NC16 die, Little Giant, 2” diameter two piece, threading Die
GTD little Giant 3/8” X 16 NC 2” threading die.
24” ad STARRETT SLOTTED HARDENED STEEL RULE NO. 4 Combination SQUARE vtg tool
Has prior owners marks, see initials in last photo. No scribe. See pics for details.
pair of MASSIVE 5 inch wide Decorative Brass Trammel Points
There are no marks I can see. I could not loosen the thumb screw to adjust the point on either one by hand but I didn't try real hard, there nice and clean now and didn't want to oil them up. Everyone wants the biggest, these gotta be close!
BROWN & SHARPE Professional master precision 526 STRAIGHT EDGE , 2 FEET 24"
BROWN & SHARPE Professional master precision 526 STRAIGHT EDGE , 2 FEET 24"
Greenfield Tap And Die Set Vintage USA
Complete Vintage tap and die set in great condition. All pieces are sharp and show minimal use. The tap wrench is a Starrett.
Vintage LS Starrett Co 6 Inch Spring Divider Compass Tool Athol Mass USA
Origin: Athol, Mass., U.S.A. - Type: Spring Joint Divider / Machinist Scribing Compass.
You save $25.00
Orig. Box for L.S. Starrett No. 93D T-Handle Tap Wrench - mjdtoolparts
An EXTRA CLEAN ORIGINAL PASTEBOARD BOX for an L.S. Starrett No. 93 D T-Handle Tap Wrench by the L.S. Starrett Company, Athol, Massachusetts. This box is in top condition, retaining its full, original paper label and having four intact corners on both the top and bottom section of the box. Length = 6.75 Inches (Ref. Id No.: 422493) [Free Shipping]
Wells Brothers Co Little Giant No A1 Screw Plate Tap Die Set Wooden Box Vintage
Vintage L.S. Starrett 6" Precision Machinist 2-Way Level Made In USA
Made in Athol, Mass. Level is a little dusty but works perfectly and vials are intact.
L. S. STARRETT Co. Vintage No. 120 Dial Caliper 0-6 Inch Athol Mass USA
L. S. STARRETT Co.
3 Vintage Pratt & Whitney Wood Boxes, Finger Jointed Corners 4 1/4”x5 1/4” EMPTY
Boxes show normal wear with scuffs and scratches, I see no cracks. This is for all 3 boxes.
Starrett 278 V-Block with Clamp
Starrett 278 V-Block with Clamp.
Vtg Little Giant Tap/Die,Screw Plate Set,1-1/4,1-5/8" Dia,1/8-3/8,US~GD🤠10.25RL
No.4 tap handle. Die Sizes; 1/8-40,5/32-36,3/16-24,7/32-24,1/4-20,5/16-18,3/8-16. we even miss the boat once in a while. ⭐We strive to be factual & accurate as possible. However,our team does occasionally make mistakes.
Rare 6” Precision Square. Made By Mauser In Germany! In very good condition.
I am a retired toolmaker and this has been in my Gerstner box for over 30 years. It has never been mistreated and it remains a very accurate tool. And it makes a great conversation piece as well! I don’t know exactly how old it is but it was old when I got it too. Will even serve as a great collector’s item.