Vintage Speaker & Horn Drivers
vintage speaker & horn drivers — pre-owned
Browse 950 vintage speaker & horn drivers — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
Altec Lansing 806A Vintage 16-Ohm HF Drivers (a great pair, original diaphragms)
This a very pair of original Altec 806A drivers. Serial numbers are very close at 8273 and 8288.
Pair G77AP12-04F 8 Ohm 3W Speaker Drivers Taiwan PT-77A Model G77AP12-04F
These speaker drivers are model G77AP12-04F, known for their high-quality sound and durability. Note picture for model number on the back. Model/Serial: C77AP12-04F / PT-7743 is the number printed on the back.
Vintage 1961 Motorola Golden Voice 8" Alnico Speaker 50D60 8HB-28
Pair of BECKER 12" woofers, Made by Becker (EIA source code=24), 18th week of 19
You are bidding on a Pair of BECKER 12" woofers, Made by Becker (EIA source code=24), 18th week of 19. Thanks for looking. See condition description and photos for details.
Antique Victor Victrola Phonograph Cast Iron & Wood Horn 8166 Multi Cell
Antique Victor Victrola Phonograph Cast Iron & Wood Horn 8166. Vintage multi-cell horn assembly with rectangular louvered wooden mouth and curved brown body. The front section features four internal vanes creating five horizontal horn cells for directing sound output. The rear section includes a curved 90-degree elbow and a round mounting base with four protruding threaded studs and two open bolt holes. Construction combines painted wood for the horn mouth and painted brown cast metal for the elbow and base, joined with rivets and screws along the transition. Ideal for vintage audio restoration projects, architectural salvage, or repurposed industrial decor; exact manufacturer and original application are unknown.
Akai DS 40T Midrange Driver Replacement for Akai ST 200 Speaker
Mid range driver from a Akai ST 200 speaker Tested and working
KLIPSCH KG4 Empty Speaker Cabinet - AS PICTURED -SEE PICS!!
Riser has several blemishes and tape on one corner. Main part of cabinet has a few very minor blemishes.
vintage CANTON 110mm (4¼") mid/bass woofer from Plus S speakers c.1987—excellent
This CANTON woofer is in clean, excellent condition. Plus, the voice coil dustcap is perfect and the surround is permanent butyl rubber. Overall, this CANTON woofer is very well preserved. This mid/bass driver was removed from a Plus S speaker and may be suitable for other CANTON models from this production era.
Yamaha JA-8080B Vintage 16-Ohm Tweeter Pair + Boxes (excellent)
This is a very nice pair of Yamaha JA-8080B tweeters. They're very heavy weighing nearly 13lb each!
pair of Paradigm 6" cast basket woofers from Titan speakers Canada 1995—refoamed
These woofers were no exception—the surrounds were intact to the unsuspecting eye, but were decayed to where they fell apart when gently pressed. This pair of Paradigm woofers is in clean, excellent condition.
vintage piezo tweeter on original mount frame from 1989 BML Tracer 1001A speaker
This piezo tweeter is in clean, excellent condition. The black-painted fiberboard is in nice shape and the hard plastic speaker casing has no cracks or imperfections noted. Plus, the grille cover is perfect as well.
19mm Vifa dome tweeter DT19D-5—MISSION Model 700 & other speakers, c.1983—superb
This Vifa high-frequency driver is correct for most, if not all,early variants of the Mission 700, in addition to the Model 707, and possibly others. This Vifa tweeter is in clean, excellent condition.
BOSE 2¾" full-range driver for double cube and cube speakers, c.1990—excellent
This is a correct original driver for the first two generations ofBOSE cube and double cube speakers—the large, more angular or "squarish" first version (charcoal or white enclosures that may have one or two grille emblems) from the mid-to-late 1980's and the second, more rounded version (charcoal “redline” trim or white enclosures) made into the early 1990’s.
University Sound ID-60T 60W Multi-Impedance Vintage Speaker Driver Unit
Assumed working, they have been on a shelf for a long time. The University Sound ID-60T 60W Multi-Impedance Vintage Speaker Driver Unit is a high-quality speaker driver designed for vintage audio systems. With a power output of 60W and multi-impedance capabilities, this driver unit provides clear and powerful sound quality for a wide range of vintage audio setups. The University Sound brand is known for producing reliable and durable audio components, making this speaker driver a solid choice for vintage audio enthusiasts looking to enhance their sound system.
University 4408 Horn Mid-T Driver & N1 High Pass Filter for Speaker Driver
University Model 4408 Horn with Mid-T Driver. Also included is N1 High Pass Crossover Network. Looks very nice and shows only light general wear. Sounds nice as well.
You save $22.35
VITAVOX TYPE 1000 DIVIDINGNETWORK CN 233 CROSSOVER FOR K15/40
We will reply you within 24 hours.
Vintage 1940’s Utah 4” Field Coil Radio Speaker for recone
from estate, as found , needs reconed - - $13 S/H to U.S.
VINTAGE PIONEER HPM-60, Speaker Crossover Network, PAIR SCS-015-B 120 W
REMOVED FROM WORKING PAIR OF HPM - 60’s. MAXIMUM INPUT POWER 120 W. RATED INPUT POWER 60 W. ALL ORIGINAL WIRES ARE INACT. 8 OHMS IMPEDANCE.
Vintage A3 Large Advent /1 Woofer Original Professionally Refoamed Speaker 10" A
It is also used in the Advent /1. It works perfectly and sounds Great. This woofer type was used in many different Advent models.
Sansui T-50N Alnico Horn Tweeters- pair. READ Description
Listing is for 2 tweeters pulled from pair of Sansui SP 30 speakers. See photos of resistance measurements. One of the tweeters sounds fine, the other is very faint.
Bose 6" Interaudio SA-200 Woofer Driver Original Speaker 4 Ohms 75W Tested Works
The seal gasket for the speaker cabinet is also included as shown in the photo's.
vintage pair Realistic #1016 full-range 3" drivers, Japan c.1980—excellent cond.
The 1016 drivers were also used in laterOptimus and possibly other Radio Shack single driver speakers from the 1980’s-early 90’s, though they were sourced from South Korea by then. The Japanese-made version is more desirable.
Polk Original Tweeter RD0088-1 RD0091-1 Speaker For Monitor 30 3.1 Ohm EXC Cond
This is a single Polk Original Silver Dynamic Balance Tweeter RD0088-1 RD0091-1 Speaker For Monitor 30. It is in excellent condition and works perfectly. It was removed from a working speaker. See all pictures for condition.
vintage Electro-Voice 12" woofer, 1965—used in E-V Two, KN-2300A, other speakers
It was also used in theElectro-Voice EV-Two and possibly other speakers. ThisElectro-Voice woofer is in clean, excellent condition. The sturdy, deep set paper cone is structurally perfect with only a couple smudges of factory assembly adhesive on the cone while the large, hard paper voice coil dustcap is flawless, as pictured.
Altec Lansing 30162 Metal Horn Throat for Vintage Speaker - Good Condition
In good condition.
SANSUI SP-1001 SPEAKER 3-WAY CROSSOVER SPEAKER CONNECTOR ONLY WORKS GREAT 🔥🔥
Very rare - excellent working condition. Please check the pics. You get exactly what you see. Price is for one crossover. I will box it very carefully. Thank you
You save $19.50
Altec 288-16G Horn Compression Driver Speaker W/ Original 288 Diaphragm Working
These work well. Tested with music source (using a crossover) and this is in perfect working condition. No issues.
JENSEN E-400 Alnico magnet 1½" Sonodome tweeter 1976—OPC 23 24 25—540 550—LS-5 6
Per the EIA source/date code on the large magnet cover, “2207619”, this tweeter was made by Jensen (220) in the 19th week of 1976. Most importantly, it’s been fully tested and sounds very strong, clear, and detailed.
JIM LANSING JBL 130A Signature 16 Ohm SINGLE Speaker Excellent Working Condition
Speaker has been thoroughly tested and in Perfect working condition. What you see is Exactly what you get. NO UNPLEASANT SURPRISES. We state the condition of the item to the best of our ability. We will respond as quickly as possible.
Akai SW-T55 Speaker Mid-Range 4 Ohms
Yamaha 4" Speaker JA 0753 Excellent Condition Vintage 4W Japan
Yamaha speaker in Excellent Condition JA 0753 4W
Magnavox 10” Field Coil Speaker 1920s/30s – Untested Dusty Parts/Repair
Е6 Vintage Magnavox 10-inch field coil speaker from the 1920s–1930s. Original metal frame, field coil housing, fabric diaphragm, and old 2-prong plug. ❗ Untested – condition unknown ❗ Diaphragm has tears ❗ Rust, corrosion and age wear ❗ Very dusty from long storage ❗ Sold AS-IS for restoration, display, or parts ❗ Buyer pays return shipping Patent plate still attached with multiple US, Canadian, British and Australian patents. Great piece for antique radio collectors, early audio restoration, or period-correct equipment. Everything shown in the photos is included. 📦 Packed securely before shipping.
vintage BOSE full-range 4½" speaker driver 1989—for Freestyle, 101 others—superb
Most importantly, this BOSE driver sounds great—strong output with detailed midrange, clear highs and noteworthy bass for the platform size. permanent textile material, not the fragile foam typically used in this era.
OLSON S-713 full-range 12" guitar speaker mfd by JENSEN c.1968—small cone repair
This Jensen for Olson guitar speaker is in clean, very good condition. The ribbed, deep-set paper cone has a thin crack, right next to the factory seam, which I neatly secured from the back side with surround glue.
vintage YAMAHA 5" woofer 110028 from NS-AC3 center speaker 1996—two avail—superb
This YAMAHA woofer is in clean, excellent condition. The paper cone is flawless and so is the poly voice coil dustcap. Plus, the black, injection-molded basket is perfect as well. Overall, this woofer looks practically new!
Vintage W14” x H7” x D12” University Sounds Loudspeaker Driver & Horn WORKS!
We don’t do that. We’re just providing the item. I only broke it down into pieces to show all detail related to this item. It’s not back together is simple to pull apart if you want to repair or clean.
University T-30 Driver Unit & H-600 Horn Responce 250-15,000CPS. Made in USA
The University T-30 Driver Unit & H-600 Horn offer a frequency response range of 250-15,000 CPS, providing clear and powerful sound quality. Made in the USA by the brand University, these vintage audio parts are perfect for restoring or upgrading vintage speakers and horn drivers. The T-30 Driver Unit and H-600 Horn are designed to deliver exceptional sound performance and are ideal for audiophiles looking to enhance their audio experience with authentic vintage components. UNTESTED
Altec Lansing Model 808-8b High Frequency Compression Driver - Not Works
This unit is being sold for parts or repair only - not works.
Two Tower Vintage Speaker Towers 2 12s And A 3 Inch
MARANTZ HD 550 MIDRANGE WITH METAL RING
HERE IS A MARANTZ HD 550 MIDRANGE SPEAKER IN GOOD WORKING CONDITION. IT METERS AT 3.5 WHICH IS A LITTLE LOW SO PLEASE NOTE THAT.