Stove & Chimney Pipes

Duravent 8DT-36SS DuraTech 36” Chimney Pipe 8” Diameter Stainless Steel READ

***This item looks used. It is dented on both ends of the pipe. There are scratches on it as well. Please see photos.***Box is damaged.*** The Duravent 8DT-36SS DuraTech 36” Chimney Pipe is a high-quality stove and chimney pipe designed by DuraVent. Made of durable stainless steel with a 8-inch diameter, this chimney pipe is perfect for improving the ventilation and safety of your fireplace or stove system. With a length of 36 inches, it provides ample space for chimney fumes to escape while also being resistant to corrosion and damage. Ideal for home improvement projects involving heating, cooling, and air systems, the Duravent 8DT-36SS Chimney Pipe is a reliable and efficient solution for your stove and chimney needs.

Double wall stove pipe

Double wall pipe 2 - 48" lengths with fittings : cap & elbo ; ss 5" inside ; 8" outside diam. plus fittings good useable condition ;

DuraTech Chimney Cap 6DT-VC Stainless Steel

Used DuraTech 6” Diameter Chimney Cap 6DT-VC stainless steel chimney pipe designed for residential use. Used less than one season so still in perfect shape. Mating flange still round and not bent up. Due to my homes orientation and surroundings I had to switch this out for a cap designed to prevent down drafts caused by wind.

Sure-Temp 208036 8 In. x 36 In Stainless Steel Insulated Pipe Stove Chimney Pipe

Sure-Temp 208036 8 In. x 36 In Stainless Steel Insulated Pipe Stove Chimney Pipe. We are not responsible for the item until it is received and signed for. Local Pickup. Credit Card. EVERYTHING ELSE.

Vintage Flue-Kap Black Galvanized Chimney Cap 21 x 21" Nicely Aged!

14.5 inches square at the base, 21 inches square at the top, 10 inches top to bottom.

Chimney Liner Steel Nose Cone Lot Fireplace Boiler

This Fireplace Chimney Liner Steel Nose Cone Lot is a set of essential components for liner installs. Made of durable steel with welded seams and eyehooks these liner nose cones guide the chimney liner into the correct position, ensuring a secure and efficient fit. Three different sizes. 6 1/2" diameter/ 7 1/2" diameter and an 8 1/2" diameter.Designed specifically for chimney applications, these products are a reliable solution for keeping your fireplace operating smoothly and safely. Feel free to ask any questions. Thnx

DuraVent DuraPlus 6 in X 14.75 in Tee Support Bracket Model 6DP-TSB

Has some marks on it. Nothing that shows clear use but buyer should assume light use and markings on item. DuraVent 6” Tee Support Bracket. Bad box. Model # 6DP-TSB

DuraVent 6"-8" DuraBlack Single Wall Slip Increaser 6DBK-XS8

The DuraVent 6"-8" DuraBlack Single Wall Slip Increaser 6DBK-XS8 is a steel stove and chimney pipe made in the United States. This black-colored increaser is designed for both horizontal and vertical orientation. It is suitable for use with stoves, chimneys, and fireplaces, and comes in a pack of 1. The DuraVent brand ensures quality and reliability in heating, cooling, and air systems for home improvement projects related to fireplaces and stoves.

Rinnai 224054 2-1/4" - 12" Telescoping Vent Non-Condensing Tankless Water Heater

Fits the standard 5" outer PVC / 3" inner steel vents on RinnaiNon-Condensing Tankless Water Heater vents.

DuraVent 6"-8" DuraBlack Single Wall Slip Increaser 6DBK-XS8

No clear signs of use however, one end has small bends/ ripples. This will not impact use. In addition, the increases seperate a from pipe. May require a screw to secure. DuraVent Single Wall 8” Slip Increaser. 6” to 8”. Black. Model #6DBK-XS8

30 Degree Flu Pipe Offset Elbow 6 in. - Airjet 6S30 - Chimney - Very Clean

Pets: We have a dog. While he doesn't hang out in our work areas. His hair gets everywhere. Excellent Condition. Just this 1 unit. No hardware or box. Most importantly, do your research to ensure this item fits your needs before purchasing .

2 Vintage 28” Long Cast Iron Log Coal Tongs + Log Grabber Fireside Fireplace

The product is a set of two vintage 28" long cast iron log coal tongs, designed to be used with a log grabber for easily moving logs in a fireplace or stove. Also included is an iron log grabber. The tongs are in a classic black color, adding a touch of traditional style to your home improvement and home & garden décor. Made of durable cast iron, these tongs are sturdy and perfect for handling logs with ease during maintenance or cleaning of your fireplace.

Duravent Pelletvent 3PVL-TK Multi-Fuel 3in. Diam Tee with Clean Out *

DURAVENT PELLETVENT. CHIMNEY TEE CLEAN-OUT.

Airjet 8S3 Chimney Pipe - 8 in. x 3 ft.

Airjet 8S3 Chimney Pipe - 8 in. Chimney Pipe - 8 in. x 3 ft.Specifications. For wood stoves and other solid fuel appliances. UL Listed 103 HT (2100°). Triple-wall; air insulated. Snap-Lock Design.

Stainless Steel Chimney TYPE: HT Model: SC - LISTED 98H3 19825 ~8" OD ~5-3/4" ID

Triple wall chimney pipe, Armco USA Made

Armco , triple wall chimney pipe , Two pieces one 13 1/2 x 56”total Two pieces One connects to fire place 13 1/2”x 19 “ Other 13 1/2” x 37” Took it out during renovation. If something can use it it’s up for grabs

SuperVent Stainless Steel Insulated Double Wall Chimney Pipe JSC6SA3 36" x 6"

The SuperVent Stainless Steel Insulated Double Wall Chimney Pipe JSC6SA3 is a high-quality chimney pipe designed for use with fireplaces and stoves. It has a dent in the center of the pipe. The interior has been impacted.

NIB 9019 Dura Vent 6" Dura Plus 9" Triple Wall Galvanized Stainless Chimney Pipe

Dura Vent part number 6DP-09.

Matte Black Stove Pipe 6" x 24"

The Matte Black Stove Pipe is a single wall steel chimney pipe designed for use with stoves. With a length of 24 inches and a width of 6 inches, this stove pipe is durable and suitable for home heating and cooling applications. The matte black color adds a sleek and modern look to your fireplace or stove. With its high-quality construction and efficient design, this stove pipe is a reliable choice for your home improvement needs.

DuraVent DirectVent Pro 46DVA-GK Chimney Liner Termination Kit

In pre-owned condition with box. Selling obo with free shipping!

Simpson Duravent 6” 4” Double Wall Gas Stove Pipe 90 Degree Elbow direct vent

90 degree elbow (4" inner/6" outer).

Conwed 89-148 Walnut 4' Drop Ceiling Cross Tee Box Of 50 Piece Steel Framing

Conwed 89-148 Walnut 4' Drop Ceiling Cross Tee Box Of 50 Piece Steel Framing Four Foot Feet Used see photos. Open box, never been installed. They have some blemishes on them since they've been sitting so long. Some small scratches and rust spots. Old stock SJ

DuraVent 6" Diameter Draft Hood Connector Type B Round Gas Vent Pipe -6GVC

The Draft Hood Connector is an adapter for connecting double-wall Type B insulated pipe to a gas burning appliance combustion exhaust vent or draft hood. It is also a way of connecting single wall flue pipe to this double-wall Type B venting pipe.

Metal Fab Inc double Wall 3N12 3" Vent 8 1/2" Length Double Wall Calculated Ship

Part Number 3N?.

Durablack 6DBK-TL 6 in chimney pipe telescoping to 68 inch- dented

DuraBlack single-wall stovepipe completes the venting system when used with one of Duravent's chimney products, such as DuraTech, DuraPlus or DuraPlus HTC. for an economical, drip-free, single-wall stovepipe, DuraBlack is an excellent choice.

USED DuraVent FSELB9004 4" Inner Diameter - FasNSeal AL29-4C Special - Stainless

Use to go from horizontal to vertical runs or vertical to horizontal runs. Use to turn vent 90°. This construction feature allows for ease of installation.

Zonon Direct Vent Horizontal Square Termination Cap 4 x 6-5/8, Heavy Silver

Designed to withstand pressure during transport or installation without denting or deformation.

Ventis Firestop Radiation Shield Class A/ Chimney System

We understand that life can be unpredictable, and our mission is to provide a safe haven for our community, where you can explore the potential in your treasured possessions. WIDTH: 14 IN.

Duravent 4PVL-60R Pellet Vent Pipe

Pellet vent pipe, fully unitized. Required for venting pellet appliance above 4,000 ft. Double wall & air insulated pipe. Od designed for stoves that burn wood pellets. Patent pending venting for stoves & inserts that use wood pellets.

Airjet 8S4 Chimney Pipe - 8 in. x 4 ft.

Chimney Pipe - 8 in. x 4 ft. For wood stoves and other solid fuel appliances. UL Listed 103 HT (2100°). Triple-wall; air insulated. Stainless steel inner; Aluminized steel intermediate, galvanized outer. Snap-Lock Design. Made in the U.S.A. Features Chimney Pipe - 8 in. x 4 ft. Specifications Dimension: 1 x 1 x 1 in. Cube: 1 .

Stainless Steel Chimney Cap 4inch Roof Vent Cap

Designed for use with solid fuel and gas burning devices, these components are created from Stainless Steel. The UL 1777 & ULC S640 listings are able to ensure that your chimney is designed for safety. These hybrid chimney components are revolutionizing the chimney liner industry and will make your installation easy and safe! Features: 4inch Diameter Fastens to the top plate, not the liner 304L Stainless Steel

Exhaust Flex Pipe 2.25" X 8" /12" Universal Type 100% Stainless Steel For

MATERIAL: 100% of Stainless Steel, 2-PLY Leak-Proof Design & Double Braided Construction; Durability and Corrosion Resistance to Harsh Conditions. FUNCTION: Appropriate Flexibility to Reduce the Exhaust System Vibration & Noise.

Primitive Old 1930's Galvanized Antique 4" Stove Pipe 90 Degree Elbow Adjustable

In 85+ year old good primitive condition. Was never used for stove/fire - only used for venting. No holes/dents/soot/burns.

DuraVent 8DBK-E45SS 8" Stove Pipe 45° Elbow - Single Wall Stainless Steel

Manufacturer: DuraVent. Product Type: Stove Pipe. Pipe Class: Stove Pipe. Elbow by Angle: 45 (degree). Pipe Shape: Round. Product Finish/Color: Stainless Steel. Material: Stainless Steel. Vent Construction: Single Wall.

DuraVent FasNSeal FSUCD4 Universal Condensate Drain AL29-4C Single Wall EXC

DuraVent FasNSeal FSUCD4 Universal Condensate Drain. 4" Stainless Steel Vent Pipe. AL29-4C Single Wall Vent System.

Stainless Steel Single Flue 14" x 14" Fireplace Chimney Cover

This chimney cap was installed for a Heat&Glo gas fireplace insert Model FB-IN. I have upgraded to another Heat&Glo gas fireplace insert that came with its own chimney cap.

DuraVent chimney adaptor 3PVP - X6

Has minor scuffs on the surface. 3" PelletVent Pro to existing chimney such as 6" DuraTech, DuraPlus, or DuraPlus HTC. A DVL/DuraBlack Chimney Adapter to fasten into support box or wall thimble needed.

Vintage 7” Chimney Pipe System American Metal Products Class A Insulated 1970s

This is a complete matching set of older Class-A insulated chimney pipe components. (4) 3 ft chimney pipe sections. (2) 2 ft chimney pipe sections. Double-wall insulated design. From older installation (1970s era).

6 Inch Wall Thimble -Black Interior Ring Non-Adjustable Galvanized Steel

6 Inch Wall Thimble -Black Interior Ring Non-Adjustable Galvanized Steel- New Other - The item has wear and comes in original box - See pictures - No hardware

Selkirk Ultra-Temp 4'L x 8" OD 304-alloy Exhaust Chimney , 206148U

Selkirk Ultra-Temp 4'L x 8" OD Retort, 206148U. PN: 206148U. The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They are designed for gravity (natural draft), non-positive internal pressure venting only.