Vents
vents — pre-owned
Browse 232 vents — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
Signature Hardware 445791 Appert Steel Wall Register - 4" x 10" - White
Part Number: 445791. Made of steel and covered with a corrosion-resistant finish, this product is as durable as it is stylish. Style: Appert. Manufacturer: Signature Hardware. Bullet Point: Made of heavy-duty, 2 mm thick steel.
9x SOLID BRASS Rectangular Vent Cover Grill/Grates CHIPPENDALE Style 1960s heavy
Vintage architectural salvage solid brass (NOT brass plated) Chippendale style heat / AC vent cover - register w/ black inserts Lot of 9 ;complete As sourced; unpolished with general patina around as expected. No repairs 11.5”Long x 5.5”Wide Ships USPS Thanks for looking!
Vintage Metal 13x12/ 15x12 Home Heating Vent Covers White Rear and hard to find
I have 3 13x12 and 2 15x12. Will separate or bunch for a deal. $50/each
Antique Brass 4x12in Savannah Design Floor Register Vent Cover (4 Pack)
Featuring an elegant Savannah design and antique brass finish, these decorative vent covers provide efficient airflow while adding a refined touch to any room. Design: Savannah Decorative Pattern. Fits standard 4" x 12" floor vent openings.
You save $11.99
Set of 3 Decorative Copper Floor Register Vent Covers 10x4 Metal HVAC Grilles
This set of 3 decorative copper floor register vent covers features a rectangular shape and is made of metal with a copper finish. Inserts are made of plastic, not metal. Only the face is metal. Designed to enhance the aesthetics of your HVAC system. The copper color and metal material make them both stylish and durable. Pre owned in good condition with normal wear.
Signature Hardware 485485 4" x 10" Brass Floor or Wall Register - Antique Brass
Product Finish/Color: Antique Brass. Material: Brass. Manufacturer: Signature Hardware. Installation Type: Surface, Wall Mounted. Shape: Rectangular. Installation Location: Floors, Walls. Duct Size: 4" x 10".
13-20 Ford Fusion Driver Side Dash AC Air Vent Wood Grain Trim
This driver side dash air vent is designed for the 2013-2020 Ford Fusion. It serves as a direct replacement part for the dashboard air conditioning and heater vent system. The unit features the silver and black finish specified by part number DS73-F018B09-BNW. This item is in used condition and has been removed from a donor vehicle. All adjustment louvers and mounting points are intact, allowing for proper integration into the dashboard panel. It matches the manufacturer specifications for the interior air distribution components of this vehicle range. Please verify that part number DS73-F018B09-BNW matches your existing component before purchase. This assembly is intended for professional installation to ensure proper alignment within the driver side dashboard assembly. A61
2 VTG Wood Floor Register Vent Covers 4”x12” Medium Oak Decorative Scroll USA
One cover is missing a piece of the scroll pattern. They fit a drop-in space of 4" x 12". Every effort will be made to disclose condition issues. Odors may be present on an item.
You save $8.00
(5) Vintage Steel Grates Vents Floor Wall Registers Hinged Salvage
All 5 show wear from the years and could use a good cleaning. No screws included. See photos for what you will receive. Thanks
10x4Rectangular Brown Metal HVAC Vent Cover Register Grille Air Duct Wall/Floor
10x4Rectangular Brown Metal HVAC Vent Cover Register Grille Air Duct Wall/Floor
Lot of 5 Floor Registers real wood med oak finish DUCT Opening 4'' x 12" Approx
Decor Grate AJH410-BLK Oriental Floor Register 4x10 Inch Textured Black Lot of 6
The Decor Grate AJH410-BLK Oriental Floor Register is a set of 6 floor vents designed in a rectangular shape, measuring 4x10 inches. The vents are made of metal and steel, with a textured black color that adds a stylish touch to any room. Manufactured by Decor Grates in Canada, these floor registers are lightweight at 1 lb each and are essential for proper heating and cooling circulation in your home. This product is a practical and decorative addition to any home improvement project related to heating, cooling, and air systems.
Vintage Vent Cover Floor Grate 11 1/2"X26"
Ready for use in your restoration project.
Vent Covers Unlimited Madelyn Carter Stonewall Supply With Damper Antique Bronze
Custom Metal Vent Covers Unlimited by Madelyn Carter Stone Wall Supply with Damper in Antique Bronze Duct size: 6 inches (height) x 8 inches (width) Overall dimensions: 7.25 inches (height) x 9.25 inches (width) Comes with original screws that are coated antique bronze to match Please see original CAD drawing in photos for all specific measurements
Vent Covers Unlimited Madelyn Carter Stonewall Supply With Damper Antique Bronze
Custom Metal Vent Covers Unlimited by Madelyn Carter Stone Wall Supply with Damper in Antique Bronze Duct size: 6 inches (height) x 8 inches (width) Overall dimensions: 7.75 inches (height) x 9.75 inches (width) Comes with original screws that are coated antique bronze to match Please see original CAD drawing in photos for all specific measurements
Lot of 2 Alluminum Rectangular Louvered Vent Covers 17 1/4 x 9 3/16 in
Lot of 2 Alluminum Rectangular Louvered Vent Covers 17 1/4 x 9 3/16 in
Signature Hardware 445783 Ballas Steel Wall Register - 6" x 14" - Antique Brass
Collection: Ballas. Product Finish/Color: Antique Brass. Manufacturer: Signature Hardware. Installation Type: Wall Mounted. Heat Approved: Yes. Material: Steel. Shape: Rectangular. Duct Size: 6" x 14".
Reggio Registers 616 Scroll Series Cast Iron Floor Grille 4" x 14” VTG 1981
SEE PHOTOS. · Will combine orders upon request or when applicable.
Unfinished White Oak Floor Vent Flushmount No Frame Madelyn Carter 4 x 10 Duct
HVAC Wall Register with Galvanized Steel Transition Boot White 12x5.5 Inch
Material: Galvanized Steel. Finish: White Powder Coat. Installation: Wall Mount. Used condition with signs of wear. Duct Shape: Round.
Lot Solid Oak Flush Mount Floor Registers Set of 6 Hardwood Wood Vents
These are genuine hardwood flush-style vents designed to sit flush within hardwood flooring systems and are substantially nicer than many modern builder-grade versions. Excellent used condition overall.
Vinyl Siding Mounting Block Universal Fit Split Pipe Classic Mount White ( 3 )
They are a little dirty, but otherwise in good shape, my buildings are tan and brown two-tone so no go here.
Brushed Nickel 4" X 12" Trellis Brass Floor Register by Signature Hardware
This vent has not been used, however light scuffs and dings are present. The lever to open and close the vent appears to be slightly bent.
You save $1.50
8x10 Cold Air Return Red Oak Stained Red Oak - Used
Screws NOT included.
3 Reggio Registers 414 Cast Iron Floor Grilles 14" x 3 1/2” 1981 Vintage
Closely view pics provided. They are in used condition and have paint wear and other signs of age an use.
Signature Hardware Honeycomb Brass Wall Register 327334
Model: 327334. Color: antique brass. Material: Brass.
Signature Hardware 362711 Old Victorian Cast Iron Wall Register 12" x 14" Black
Installation Location: Wall / Ceiling. Manufacturer: Signature Hardware. Product Finish/Color: Black Powder Coat. The product is in good condition and includes all parts.
Grille for Round Spiral Duct - Galvanized Steel Register 1 Way Louver 17" x 3"
Don't think it was actually ever used, but has some scuffs/scratches as shown. Selling as a used unit. Screws NOT included. See pictures for actual item being purchased. Same or next day shipping! Feel free to contact me if you have any questions, I strive to provide the best service. Thank you for looking.
You save $56.79
Vent Covers Unlimited Madelyn Carter Stonewall Return Concealment Antique Bronze
Custom Metal Vent Covers Unlimited by Madelyn Carter Stone Wall Return with Concealment Louver in Antique Bronze Duct size: 5 inches (height) x 13.75 inches (width) Overall dimensions: 7.75 inches (height) x 15.75 inches (width) Comes with original screws that are coated antique bronze to match Please see original CAD drawing in photos for all specific measurements
Vent Covers Unlimited Madelyn Carter Stonewall Supply With Damper Antique Bronze
Custom Metal Vent Covers Unlimited by Madelyn Carter Stone Wall Supply with Damper in Antique Bronze Duct size: 5 inches (height) x 12 inches (width) Overall dimensions: 7.75 inches (height) x 13.75 inches (width) Comes with original screws that are coated antique bronze to match Please see original CAD drawing in photos for all specific measurements
White Aluminum Air Vent - BUILDMART 36" Double Slot
This vent cover was designed to be decorative and not structural. Whether you're remodeling or upgrading, they add sleek, architectural value to walls, ceilings, and floors. • - - /" ; °.
Two Signature Hardware Wicker Style Brass Floor Registers Antique Brass 4" X 10"
Product Finish Antique Brass. Installation Type Floor. Mounting Hardware Included No. Design Traditional. Size 4 x 10.
Signature Hardware 401119 Mission Brass Floor Register - 4" x 12" - Oil Rubbed B
Product Finish/Color: Oil Rubbed Bronze. Material: Brass. Manufacturer: Signature Hardware. Installation Type: Surface. Duct Size: 4" x 12". The product is in good condition and includes all parts.
Reggio Registers 4x10 Cast Aluminum Floor Vent Grille Decorative Antique Style
Cast aluminum construction with an ornate traditional design and dark aged finish. • Type: Floor Vent Grille / Cover. These are grille covers only and do not include damper boxes. • Features: Ornate, Decorative.
You save $9.00
Floor Register Solid Cherry Natural Wood 4x12 Rust Proof Damper Box Cover 3 Pack
This product is a set of three rectangular vent covers made of solid cherry wood, measuring 4x12 inches. The covers are designed to fit floor registers and are rust-proof, ensuring durability and longevity. Made in Canada, these vent covers add a touch of natural wood elegance to your home's heating and cooling system. The rich red color of the cherry wood complements various interior decors, adding a stylish and functional element to your home improvement project.
2010-15 Hyundai Tucson Passenger Right RH Side Dash Air Vent Tan 97490-2S000 OEM
Genuine OEM Hyundai Tucson passenger side dashboard air vent assembly. This right-hand side (RH) vent is designed for left-hand drive (LHD) vehicles and features a tan/beige trim bezel that matches the interior aesthetic of the 2015 model year. The unit includes the adjustable directional louvers and the airflow control thumbwheel, both of which operate smoothly. The rear housing is marked with part number 97490-2S000 and the Mobis/Hyundai/Kia branding, ensuring a perfect factory fit and finish for your vehicle's ventilation system. All mounting clips appear intact for a straightforward installation.
3 Deflecto Plastic Replacement Ceiling Vent 8x4 Inch with Push-Pull Damper
This Deflecto plastic replacement ceiling vent is designed for 8 inch by 4 inch duct openings. It features a simple push-pull damper for easy control of air flow. The vent can be painted or stained to match your decor and is made to resist rust for long-lasting use. The package includes the vent and two screws for installation. Some minor wear is present on the edges but does not affect functionality.
6 x 10 Inch (Duct Opening) White Floor Register Vent Cover, one new / two used
Keen Home 4”x12” Smart Vent SV01-412-MP-1.0 *FOR PARTS OR REPAIR**READ**
For that reason this unit is being sold as -is, for parts or repair only.
Decor Grates AJH410-NKL Floor Register, 4" x 10", Nickel (4 pk)
You save $3.00