Lathe Accessories
lathe accessories — pre-owned
Browse 452 lathe accessories — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
Unimat DB / SL Mini Lathe Wooden Storage Box
Emco Unimat 3 Profile Milling Attachment, Ref No 151160 & 151165
No.151160, include a set of 3 profile cutters ref.
Unimat DB / SL Lathe Flexible Shaft Hand-Piece - DB 1250
Emco Unimat 3 Lathe Table Saw Attachment, Ref No 150380
Shopsmith Mark V 500 Wood Lathe Tool Rest - Arm Only
Shopsmith Mark V 500 Wood Lathe Tool Rest - Arm Only
Emco Unimat 3 Lathe, Lathe Tool Grinding Attachment, #150-090, OEM, Austria,#157
Mounted on the lathe bed. - included special grinding wheel arbor. - also includes grinding wheel #152-090.
Unimat 3, Emco, Longitudinal Feed Attachment, #150-300 , Bed Slide feed, #157
An original OEM part, made in Austria. 2 free belts are included however these will only work temporarily. - can be disengaged when not in use.
Unimat 3, Emco, 3 Jaw Chuck, # 150-410, 14Mx1 threads, OEM, Austria, #157
NOTE: This Unimat 3 chuck is threaded 14Mx1 and does not fit the earlier model Unimat DB200 or SL 1000 which are threaded 12Mx1.
Edelstaal 5 Machinist Boring Bits, Made in Germany
Edelstaal 3/8" boring bits: BN 10 F, BN 10 g, BN 10 n, BN 10 55°, & BN 10 60°. Made in Germany.
Shopsmith Mark V 500 Wood Lathe Tool Rest Arm
Shopsmith Mark V 500 Wood Lathe Tool Rest Arm
Unimat DB / SL Mini Lathe Mill Table With 2 Clamps
Unimat 3, Emco, Lathe Bed Only, Part #A3A-000-010, Vintage, Austria, #157
Emco Unimat 3 Lathe, Bed Only, Part #A3A-000-010, No leadscrew screw is included.
Unimat 3, Emco, Lathe Indexing Head #150-320 & Plate #24, OEM, Austria, #157
Note: This item fits the Unimat 3 lathe only and does not fit the earlier model Unimat DB200 or SL 1000 lathes. Unimat 3, made by Emco, Lathe Indexing Head #150-320 & #24 Plate, Made in Austria.
Unimat DB / SL Mini Lathe Table Saw Attachment, Ref No 1240 & 1241
For wood cutting, 1 (2.5" dia.).
Unimat DB200 Mini Lathe Bed, See Photos.
Unimat SL1000 or DB200 Mini Lathe Headstock Spindle
Unimat Mini Lathe & Accessories, Black Label - Cast Iron Model
Unimat 3, Emco, Thread Former guide, Size 32 Thread, TPI, #150-560, Austria, 157
Does not fit the older Unimat DB200 or SL1000 lathes. An original OEM part. The thread number is stamped on the drum & brass follower but is hard to see in the pictures.
Unimat 3, Emco, Bed Slide, Complete, #A3A-050-000, Vintage, Austria, #157
Note: This item fits the EMCO Unimat 3 lathe only and does not fit the earlier model Unimat DB200 or SL 1000 lathes. Emco Unimat 3 Lathe, Bed Slide, #A3A-050-000, Orignal part. Made in Austria. All parts are very clean and have been well maintained.
Vintage Antique Optician's Shuron 54 Uni Chuk Drill or For Jewelry Maker
Will need a new belt to make machine run electric motor Works, but you see is what you receive contact any questions or concerns if you don’t want the electric motor or you just want the machine shipping would be cheaper because it’s it’s pretty heavy
Emco Unimat 3 Mini Lathe with Accessories
Unimat SL1000 Mini Lathe Vertical Column & Headstock Adapter
Unimat 3, Emco, Steady Rest, Part #150-240, 3 brass points, OEM, Austria. #157
EMCO, Unimat 3, Steady rest, OEM Part #150-240, made in Austria. - support & steady longer material. - attaches to lathe bed.
RARE Delta OEM Lathe Wood Turning Duplicator 46-408
Unimat DB200 / SL1000, Black Nylon Dial Hand Knob, OEM, Vintage, Austria, #A003
Unimat, DB200 or SL1000 Nylon (Plastic) Dial Hand Knob.OEM original, m ade in Austria.
PSI Woodworking CSC2000C Barracuda Wood Lathe Key Chuck System
Very good used condition. This is 1" x 8 tpi, but a 3/4" x 16 tpi adapter is included.
Unimat 3, Emco, Thread Former guide, Size 16 Thread, TPI, #150-560, Austria, 157
Does not fit the older Unimat DB200 or SL1000 lathes. An original OEM part. The thread number is stamped on the drum & brass follower but is hard to see in the pictures.
Unimat 3, EMCO, Dead Center OEM, #A3A-000-090, Comes with a new lathe, #157-2
This item fits the Unimat 3 lathe only and does not fit the earlier model Unimat DB200 or SL 1000 lathes.
HARDINGE HLV-H BD-1 Bed Clamp For Dial Indicator
See pictures. Near nos condition
Unimat DB/SL Mini Lathe Flexible Shaft, Ref No. 1250
Unimat DB / SL Lathe Power Feed Attachment - Incomplete
You can use this incomplete set to replace your currently worn power feed parts. For example, replace both bearing block right & bearing block left.
Emco Unimat 3 Lathe Thread Chasing Attachment Ref. No. 150250
Shopsmith Nova Chuck And Jaws
Delta A-054-2 Miter Gauge For Use With Sanding Wheel Mini Disc Sander
The Delta A-054-2 Miter Gauge is a precision tool designed for use with a sanding wheel mini disc sander.
Unimat 3 / ROHITI Drill Chuck, 1/32"-5/16", THD M14x1 & Key, West Germany, #157
When the Unimat lathe is in the milling setup, can be used as a drill press drill chuck. Note: This Unimat 3 drill chuck is not threaded to fit the earlier Unimat DB200 / SL 1000 lathes which are threaded 12Mx1.
Unimat 3, Emco, Lathe Bed Leadscrew Only, #A3A-000-050, Vintage, Austria, #157
Emco Unimat 3 Lathe, Bed Leadscrew Only, Part #A3A-000-050, original part, made in Austria. All parts are very clean and have been well maintained.
Unimat 3, Emco, Open end Wrench, 10mm & 8mm, OEM, Comes with new lathe, #154
EMCO, Unimat 3, Double open-end Wrench, sizes 10mm & 8mm, OEM. - both 10mm & 8 mm open ends. - black anodized finish to prevent rust.
Emco Unimat 3 - Original Accessories, Ref. No. 152100
Unimat DB/SL Combination Jig Saw & Sabre Saw, Ref. No. 1080
Unimat SL / DB Mini Lathe Typ U100 Motor, 115V, 90W
Unimat SL / DB Mini Lathe Typ U100 Motor, 115V, 90W, lightly used, in excellent condition. This is Unimat's latest Lightweight, compact, and equipped with an internal fan motor. Tough nylon housing, able to withstand long hours of operation without overheating.