Lathes
lathes — pre-owned
Browse 2,264 lathes — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
Sherline Lathe 4400 With Chuck And Accessories 3.5 Inch x 17 Inch Lathe
Sherline Lathe 4400 With Chuck And Accessories 3.5 Inch x 17 Inch Lathe Runs great through the full speed range
Sears And Roebuck 6" Metalworking Lathe Model 101.21400 With Parts Manual
lathe has some wear but is in otherwise great shape...has a quick change tool post and 4 jaw chuck.as well as a milling attachment..tail stock has a dead center and a brand new Jacobs chuck. comes with a handy little bench and a metal toolbox with some misc. lathe parts.. local pickup only...
CRAFTSMAN WOOD LATHE HEAD STOCK #28212-103 FOR MODEL 103.21600 !
I DID LOOSEN ALL SET SCREWS ON THE SHAFT, THEN PUT WOOD ON SHAFT AND TAPPED LIGHTLY. WANTED TO MAKE SURE NOTHING WAS RUSTED IN PLACE. WAS ABLE TO MOVE ALL PIECES. I DID NOT TRY THE 2 SCREWS ON THE PLATE ON THE OTHER SIDE.
Craftsman 103.21600 Wood Lathe Bed Headstock Tailstock Tool Rest
Vintage Craftsman wood lathe assembly, model 103.21600, manufactured by Sears Roebuck & Co. This listing includes the main bed, headstock, tailstock, and tool rest assembly as shown in photos. The unit shows age-appropriate wear including surface rust, dust, and cosmetic marks from storage. Components appear solid and complete for what is present, but this is being sold as an incomplete setup. ⚠️ Please note: • No motor included
UNIMAT DB Lathe, Cast Iron Head & Tailstock, Bed, Slide, Year 1956, Austrian,150
Unimat DB 200 Lathe, Red label, made in Austria approximate year 1955. Great Unimat lathe for adding your own variable DC motor upgrade kit or geared pulley kit. This is not a complete lathe setup.
Unimat Lathe DB200 SL1000 Accessory Edestaal Cutting Tool Bit Insert set 1290S
I already have plenty of cutting tools so don't need this set. Has been used lightly. Set is complete and includes left hand, right hand, cut-off and boring bar with extra inserts and tools. Very cool, useful and popular accessory for most all DB200 and SL1000 Unimat lathes.
ShopSmith Mark V 520 510 505 M7 60" Long Connecting Tubes Poles
Models 505, 510, 520 and M7. They are the extra long 60" poles.
Shopsmith Mark V accessories - shaper and router shield w/ arm, elbow chute
SHOPSMITH MARK V Drive coupling lot.
ShopSmith Mark V Upper and Lower Drive Hub - Motor Side Free ship USA
Milwaukee 2635-20 M18 Cordless 18-Gauge Double Cut Shear (Tool Only)
M18 Cordless 18 Gauge Double Cut Shear - Bare tool. With our dynamic pricing model, our prices are always competitive. Item part number: 2635-20. Pre-Owned in good working condition. Showing normal signs of wear from use.
You save $7.05
Unimat Lathe DB200 SL1000 Accessory Indexing and Dividing Head Attachment 1260
It is complete with a #48 tooth plate as sold by Emco, other division plates are available. Everything moves freely. Minimal corrosion. Very cool, useful and popular accessory that should fit most all DB200 and SL1000 Unimat lathes.
UNIMAT, Miniature Machining Techniques, Year 1971, Original Unimat Bible, #152
"UNIMAT, Miniature Machining Techniques, handbook & Operation, for all Unimat Lathe Machines" This is practically the bible on the Unimat DB200 / SL 1000 lathes. UNIMAT, Miniature Machining Techniques handbook.
*EXCHANGE* - SHOPSMITH KNOB SPEED CONTROL KNOB / HANDLE - *EXCHANGE*
I will repair it by replacing the old cast aluminum gear with a steel gear, then clean, polished and paint. Sorry I had to raise the price, the cost of supplies went up more then double. If you have any, I would love to recycle them.
Unimat Lathe DB200 SL1000 Accessory Thread Chasing Attachment Complete 1270
It is complete except for the 60 degree outside thread cutting tool bit, those are readily available. I would say it's in excellent shape, maybe never used. Minimal corrosion. Includes one #34 thread pattern to get you started.
Iron 3/4" Box Wrench DDL 56 From 10" Delta Homecraft Wood Lathe Serial # 0-2261
Local Pick-up Available.
Delta Rockwell Wood Lathe 12" Tool Rest with 1" Post No. DDL-12 Cat. No. 692
Delta 12" tools rest good condition, see photos.
Delta Rockwell Wood Lathe 12" Tool Rest with 1" Post No. DDL-12 Cat. No. 692
12" Delta tool rest, great condition.
RARE Delta Milwaukee Wood Lathe 4 Step Motor Pulley 932 w/ 3/4” Bore MADE IN USA
Delta made a few different bore sizes (1/2, 5/8, and 3/4) for this Model 932 pulley, so ensure it will fit your motor shaft before purchasing.
Unimat DB /SL Circular Saw # 1240, 2 Saw Blades, Austria, Vintage, #130
Also includes one used blade for cutting steel and 1 large 3 1/2" blade for cutting wood (requires riser block) Both are tarnished but still very sharp. - cuts maximum height of 1", larger saw blade requires riser block.
Delta Rockwell Wood Lathe 6" Face Plate 46-937 1” X 8 TPI RH & LH Threads
Delta Rockwell Wood Lathe 6" Face Plate 46-937 1” X 8 TPI Right Hand & Left Hand Threads In fine used condition. See pictures. 1” x 8 threads per inch. Winning bidder pays $9.75 for USPS Priority Mail Shipping within the United States. International shipping is available. Contact me with any questions.
Jacobs Chuck 5/8" Bore From Vintage Shopsmith Mult-tool Machine
Used Chuck in good working condition.
Unimat Lathe DB200 SL1000 Accessory Planer Attachment Complete Wood Planing 1050
Complete, I installed it on my lathe to test it out, works good, see video and last 2 pics of this planer attached to my lathe, lathe obviously not included. I don't think previous owner ever used it.
Unimat DB /SL Circular Saw # 1240, Rare Gray, 2 Saw Blades, Austria, Vintage,422
Unimat DB / SL Circular Saw # 1240, Includes blade guard, made in Austria. - cuts maximum height of 1", larger saw blade requires riser block. - includes the new model saw fence with thumb screw lock down.
Unimat DB/SL Headstock Spindle Pulley, OEM 402-7, Original, Vintage Austria,#106
A ll parts are very clean and have been well maintained.
You save $15.00
Shopsmith molder and drum sander insert for 510 models
Edelstaal Unimat Lathe Boring Bar #2710, 1/4" bar, 6" long & 1 HSS Insert, #122
Edelstaal Unimat DB200 or SL1000 Lathe Boring Bar # 2710, 1/4"" Tool Holder. Uses various types of 1/8" wide steel inserts like HSS, T-15, etc. -holds reusable standard Edelstaal inserts. -made of HSS, hardened & ground.
UNIMAT, Steel Face-plate, 2 5/8", Milled, Dog ear, Austria, Vintage, #ML150
Complete, ready to use. -solid steel, milled, face plate, 3 access slots. Note: The copper colored brazing marks on the steel dog are normal and from the manufacturer.
Robert Sorby Sandmaster Bowl Sanding Tool w/ 2" Pad Included Sandpaper
The Robert Sorby Sandmaster Bowl Sanding Tool is a high-quality power tool designed for woodworking enthusiasts. This tool, made by the renowned brand Robert Sorby in the United Kingdom, is suitable for sanding wooden bowls and other projects. It comes with a 2" pad included and can be used with sandpaper for a smooth and precise finish. Whether you are a beginner or a professional woodworker, this sanding tool is a versatile and efficient addition to your workshop.
You save $22.11
Robert Sorby Multi Tip Hollowing Tool Carbide Insert 18.5” Sheffield
Robert Sorby woodturning multi-tip hollowing tool made in Sheffield, England. Features a half-round steel shank with flat reference surface and a replaceable carbide-style cutter secured by a clamp and screw. Designed for hollowing bowls, vessels, and interior turning work on a lathe. Overall length is approximately 18 1/2 inches. Shows normal use with surface wear and light scratches to the shaft. Cutter is installed and usable but may benefit from rotation or replacement. Handle is solid with light wear. See photos for complete details.
You save $11.99
PSI Woodworking CSC500 BarrAcuda Wood Lathe Key Chuck System, Not Complete
You save $8.00
McGraw-Edison Sabre-Lathe 3610 TQ 1968-73 Yellow 3-in-1 Table Saw/Lathe/Sander
For your consideration is an exceptionally well-preserved McGraw-Edison Sabre-Lathe model 3610 TQ – the legendary 3-tools-in-1 powerhouse manufactured in Geneva, Illinois between 1968 and 1973. This is NOT a repainted or restored unit. It retains: • ≈90 % original Safety Yellow enamel with only light scuffs • 100 % intact factory label (highly sought by collectors) • All original 1/3 HP ball-bearing motor (115 V, 2.6 A, 60 Hz) • Smooth 3-speed pulley system: 3100 / 3300 / 3700 RPM • 10″ carbide-tipped blade, original cast-aluminum table saw top, disc sander plate, two tool rests, miter gauge, and blade-guard assembly • Original rubber power cord with no cracks or repairs
Unimat Lathe DB200 SL1000 Accessory Simple Tool Rest & Chisel Set wood turning
Very cool, useful and popular accessory for most all DB200 and SL1000 Unimat lathes.
Unimat 3, Emco, Headstock Pulley, Part #A3A-030-020, Main Spindle, Austria, #154
Made in Austria.
UNIMAT, DB 200 / SL Milling, Fixture Table, No 1210, 5" x 3", 3 T-slots, #148
Unimat Lathe DB200 SL1000 Accessory Index Dividing Head Plates set of 3
They are complete with as sold by Emco. Minimal corrosion.
Delta Rockwell Wood Lathe 12" Tool Rest with 1" Post No. DDL-12 Cat. No. 692
Delta 12" tools rest good condition, see photos.
Unimat Lathe DB200 SL1000 Accessory Miter Mitre Gauge 1241 Circular Table Saw
It is designed for use with the Unimat Table Saw. Includes original box, I don't believe this has ever been used. Very cool, useful and popular accessory that should fit most all DB200 and SL1000 Unimat lathes.
Shopsmith Mark V 4” Jointer Shop Smith Vintage
