Push Rods

USED SET -Trick Flow - Chromoly Pushrods 5/16"- 6.700

USED Set of Trickflow Chromoly Pushrods. Set of Used trickflow pushrods, removed from a SBF with less then 1k miles of use.

Big Block Chevy Tall Deck Push Rods 3/8 Inch Diameter 88961559

used ,low mileage push rods. 8.900 length comp cams 7.900 Chevrolet performance free shipping to the lower 48

Trick Flow 5/16 9.00 pushrods

Trick Flow push rods 9.00” x 5/16 x 0.80 Used only about 200 miles Excellent and straight condition Guaranteed to function properly If not satisfied I will be happy to take a return Only ships to the lower 48 States Thanks for looking

Ford Pushrods 351 Windsor Roller Motor Engine Explorer Mustang Explorer GT40 EFI

Up for sale is a factory set of 351 windsor engine pushrods. These were pulled from a 1995 ford 351w roller motor. They are in good shape and were pulled from an engine that ran just fine. We have cleaned them for the most part and checked to make sure they weren't bent.

Chevy 235 PUSHROD Stovebolt, 11 1/4" long, 1940s-1950s multiple available 11.25

Pushrod(s) for 40s- 50s Chevy 235 "stovebolt 6s.". These are the longest (11.25") variety for 55-62 235s.

Comp Cams 7995 Push rods 8.000 Long Manley Dragracing Sbc IMCA UMP

Here is a used set of 16 Comp Camspushrods8.00 0" long they are 5/16" dia. Part number 7995. They are. 080 wall. Good shape.

Chevy 216 PUSHROD Stovebolt, 10 7/16" long, 1940s-1950s, USED multiple available

Pushrod(s) for 40s- 50s Chevy 216 "stovebolt 6s.". These are the shorter (10 7/16") variety.

Pushrods Set All From 2007 Jeep Wrangler 3.8 04781024AB 4wd

Jeep Wrangler 2007-2007 3.8L.

GENV 5.3 6.2 L83 L86 LT1 LT4 Push Rods OEM GM 12619828 - SET OF 16

Part # 12619828. 2022 Chevrolet Camaro LT1, SS, ZL1 6.2L V8 - Gas. 2021 Chevrolet Camaro LT1, SS, ZL1 6.2L V8 - Gas. 2020 Chevrolet Camaro LT1, SS, ZL1 6.2L V8 - Gas. Removed from a vehicle with less than 4,000 miles which had performance modifications added.

Ford Pushrods 302 HO Roller Engine Explorer 6.25" Long OEM Mustang Explorer GT40

87-93 FORD MUSTANG FOX BODY FACTORY LENGTH. WORKS ON GT40 TOO. EVEN WHEN HEADS ARE CUT. Up for sale is a factory set of 302 engine pushrods. These were pulled from a fox body mustang but will also fit a number of roller EFI 302 engines such as 94-95 302 engines and explorer and mountaineer 302 5.0 engines 96-01.

Ford 351w Pushrods Hydraulic Flat 8.2" Length 5.8l F-150 F-250 Truck Push Rod

Vintage Hot Rat rod Fits 2 5/8 Carbs Air Filters 4" Stromberg 97 Duce Flathead

401-425-364-322 1959 1960 1961 1962 1963 1964 1965 1966 nail head super wildcat nos 325 360 340 hp 445 465 hot rod muscle car.

COMP CAMS PUSH RODS!! CHEVROLET! NEW!! set of 16 7808-16

here is a set of 16 brand new pushrods from comp cams--part number 7808-16 and the length is 7.205--add to your collection or keep spares!!--11.00 shipping and handling will put them in your mailbox--US shipping only--THANX!!!

Caterpillar CAT 3500 3508 3512 3516 Cylinder #1 PUSH RODS 100-3879 w BRIDGES OEM

Set of 12 CAT 3406B 3406C 3408E 3408B 3408C 3412 Diesel Push Rods OEM 4W5998

03-07 Ford F250 F350 6.0 6.0L Diesel Pushrod Set [16] Rods OEM Push Rod Pushrods

1980 - 1986 Ford F150 F250 F350 Gas Engine Dash Bezel. Removed from a 2004 Ford F-250 King Ranch 6.0L Diesel 5R110 Automatic Transmission 4WD CCSB 156In. W.B. / Ext: St Green - Aq Tan / Int: Sh Tan. 86 Ford F150 F250 4.9 Manual PCM ECU Computer AH OEM.

(8) Porsche 356 912 Pushrod Set CHROMOLY STEEL Norris

(8) Porsche 356 912 Push Rod Set Excellent condition.

Chevy 235 PUSHROD Stovebolt, 10 5/8" long, 1940s-1950s multiple available

Pushrod(s) for 40s- 50s Chevy 235 "stovebolt 6s.". These are the longer (10 5/8") variety.

Comp Cams 7972 Push rods 7.800 Long Manley Dragracing Sbc IMCA UMP

Here is a used set of 16 Comp Camspushrods7.80 0" long they are 5/16" dia. Part number 7972. They are. 080 wall. Good shape.

Set of 16 OEM 1955-86 Small Block Chevy Valve Push Rods SBC 265 283 327 350 400

1 SET OF 16 CHEVY SMALL BLOCK PUSHRODS...USED ASK QUESTIONS..DO YOUR RESEARCH

1951-54 Chrysler 331 Low Deck Hemi Custom Adjustable Pushrods use with 392 Head

What i have here are these custom made Adjustable pushrods for a Low Deck 331 Hemi to use tall deck 354/392 Hemi Heads ONLY for/from 1951-54 Chrysler These adjustable Pushrods are made to custom lenghts ONLY to work with 331 low deck Hemi engine with 354/392 Tall Deck engine heads.There are 8 intake pushrods at 12 1/4 inches long and 8-Exhaust Pushrods at 10 11/16 inches.The Ball at the top is .250 at the lifter bottom its .375. These Custom Made Adjustable pushrods are in really good condition.Shipping is $16.95.Please feel free to ask Questions.Selling in AS IS condition.,

Chevy GMC LS LS1 LS2 LS3 LS6 92 Gen III Gen IV Pushrods 10238852 - Set of 16

As a result, it no longer needed the OEM Factory parts. Excellent condition with minimal evidence of use. Part #10238852. These were removed from a low mile vehicle which had performance modifications added.

6X Push Rod 16851-15110 for Kubota Z482 Z602 D722 D782 DF752 WG972 D902 B7410D

The 6X Push Rod 16851-15110 is a high-quality valvetrain component designed specifically for Kubota engines such as Z482, Z602, D722, D782, DF752, and more. This push rod is an essential part of the engine's valvetrain system, ensuring precise and reliable control of the engine's valves. With manufacturer part numbers 16851-15110, 1685115110, and 16851-1511-0, this push rod is a perfect replacement or upgrade for your Kubota engine, providing peace of mind and optimal performance. They came out of a running D782 engine that was in a Kubota ZD21 mower

NOS GM # 3946067 CORVETTE CAMARO Push Rods OEM 454 BIG BLOCK CHEV NHRA GASSER

This is for a single OEM, NOS, GM High performance push rod.21 available.

SOLID 1 PIECE TRIUMPH 650 RACING PUSH RODS 750 LONG ROD WEBCO KIBBLEWHITE TT

USED BUT HAVE BEEN CHECKED OVER AND ARE STRAIGHT.

1 Jesel Pushrod Length Checking Tool D1

We have a used 1 Pushrod Length Checking Tool. AT A WORKING DESKTOP COMPUTER. YOU HAVE TO BE. WE DO NOT CANCEL ORDERS. LOOK AT THE PICTURES AND YOU DECIDE. MOST OF OUR. The largest single source of waste paper collected for recycling is corrugated boxes.

(8) Porsche 356 912 Pushrod Set CHROMOLY STEEL

(8) Porsche 356 912 Push Rod Set These have some shelf wear, although I don’t believe they have ever been installed.

NOS GM Pushrods # 14095256 (quantity of 7) 5/16" dia

This rod 100% fits for General Motors cars. 1984 GMC Suburban C2500 Base, High Sierra, Sierra Classic 5.0L V8 - Gas, 5.7L V8 - Gas. 1984 GMC Suburban C1500 Base, High Sierra, Sierra Classic 5.0L V8 - Gas, 5.7L V8 - Gas.

Set Of 18 Caterpillar Cat C10 Diesel Engine Exhaust Intake Push Rods 1043568 OEM

Caterpillar CAT 3500 3508 3512 3516 Cylinder #6 PUSH RODS 100-3879 w BRIDGES OEM

Set Of 12 Cummins ISC ISL 8.3 Diesel Engine Pushrods 3905194 OEM

USED ALUMINUM SPRING LOADED PUSH ROD TUBE SET 8 VW BUG GHIA THING BUS EMPI 9096

This product is a set of eight used aluminum spring-loaded push rod tubes designed for the VW Bug, Ghia, and Thing models. The tubes were blue anodized but the finish is discolored. I always kept some on hand when I was off roading incase I bent one of the original tubes. Each tube uses 3 seals. They can be a life saver when in the boondocks. Look at the pictures as they are part of the description. Sold to the lower 48 States only.

Pushrods Set All For 11-14 Ford F-250 Super Duty 6.7 F4TE6565AA Diesel

Ford 6.7L, Diesel. Ford F-250 Super Duty 2011-2014 6.7L. Ford F-350 Super Duty 2011-2014 6.7L.

Trick Flow Chromoly Pushrods Set of 16 5/16" Dia Ball - Ball 6.750" .080

This is a set of push rods I removed from a Mustang 302 with trick flow heads

1932 Ford 4 Cylinder ENGINE PISTON RODS Original set 4 Model B C cores

This is an original set of 4 - 1932 Model B Ford Engine Rods.Goodlooking condition, look to be good cores for restoration-see photos.These fit all '32-34 Fords with 4 cylinder engine.

2001-2016 Chevy/gmc 2500HD 3500HD6.6L Duramax Used Push Rod Lb7 Lly Lbz Lmm Lml

This push rod is compatible with all Chevy/GMC 2500HD and 3500HD models from 2001 to 2016 that have a 6.6L Duramax engine. It is made for use in Valvetrain components and is specifically designed for use with Push Rods.

Set 16 New Push Rods 57 58 Chrysler 392 HEMI NORS Int 10-1/8 Exh 11-19/32 Long

Up for sale is a set of 16 HEMI push rods Except 300. Then these push rods will not be right. Made in the USA many years ago. 1957 - 1958 Chrysler 392 Hemi EXCEPT 300. Intake 10-1/18 or 10.132 Long.

Set 16 New Rusty Push Rods 1957-1962 Cadillac 365 390 DeVille Eldorodo USA NORS

1958 - 1962 Cadillac All 365 & 390. Then these push rods will not be right. These push rods were made in USA many years ago. 1957 Cadillac 365 After engine number 043298. The length is 9-37/64 or 9.580 long.

1998.5-2018 OEM Cummins Pushrod Set 24 Valve Dodge Ram Diesel 5.9L 6.7L(12)

1998.5-2018 OEM Cummins Pushrod Set 24 Valve Dodge Ram Diesel 5.9L 6.7L set of 12 used pushrods out of a 2007 dodge ram. they are in good working order

1998-2018 Set of 12 Cummins Diesel ISB QSB 6.7l 24V PUSH ROD Valves 3941253 OEM