Racing Clutches

Aluminum RC 55-57 Chevy Blowproof Bellhousing Scatter Shield 2p Ansen Wedge NHRA

R.C. INC New London. O was one of the first scattershields available that NHRA approved. fits: Small Block Chevy 265-400 & Big Block Chevy 396-454 CID V-8 engines. made of heavy duty cast aluminum with removable bottom.

Quartermaster 7 1/4 Super Pro Double Disc Complete With Flywheel 153t 26spl 250

Used was working good looks like it needs new clutch disc.

BMW Series 3 (E46) Coupe Luk 124 0336 10 Clutch Kit 320Cd Cp� 2p/d/1995cc

The BMW Series 3 (E46) Coupe Luk 124 0336 10 Clutch Kit is a high-performance part designed for the 320Cd Cp� 2p/d/1995cc model. It is specifically designed for tuning and styling purposes, providing improved performance and racing capabilities.

QUARTER MASTER 3 DISC CLUTCH 26 SPLINE CHEVY 2 PIECE SEAL, NO FLOATER PL ATES

HERE IS A QUARTE MASTER 5.5 3 DISC CLUTCH. DISC SIZE-------5.5". DISC--------------.102 -. 102 -.103 THICK.

Olds Pontiac Blowproof Safety Bellhousing Scatter Shield Oldsmobile Lakewood👀🏁

Pontiac Olds Steel Racing Blowproof Safety Bellhousing ( as shown in 11 pictures ). looks like Lakewood # 15100 ?. fits: 64-77 Olds 330-455 CID, 64-81 Pontiac 326-455 CID (check your application). for condition and wear & ensure item fits your project.

Tilton 7.25” Triple Disc Clutch Cover Grey Spring 66-120-3G

Used Tilton 7.25” 3 disc clutch cover with grey spring. This is the cover only no pressure plate or floater. Used on an autocross car for about ‘i events and I’ve switched to a smaller diameter clutch.

Chevy Steel Blowproof Safety Bellhousing Scatter Shield Ansen Lakewood w/plate👀

Chevy Steel Racing Blowproof Safety Bellhousingwith block plate (as shown in 15 pictures ). fits: Small Block Chevy 265-400 CID & Big Block Chevy 396-454 CID & LT1 engines.

Chevy - Ford 2-piece Blowproof Safety Bellhousing Scatter Shield Removable Ansen

Ansen Chevy - Ford 2-pieceSteel Racing Blowproof Safety Bellhousing with block plate (as shown in 16 pictures ). looks like it fits: Chevy V8 & Small block Ford. 2-piece with removable bottom to change clutch or flywheel easier.

RC Ansen Wedge Chevy Blowproof Safety Bellhousing Vintage Early Scatter Shield🏁

I think it's a R.C. Industries but could be an Ansen or a Wedge I'm not sure. fits: Small Block Chevy 265-400 & Big Block Chevy 396-454 CID V-8 engines. early design has side tabs for 1955-1957 mounts on Full-size & Corvettes.

Set of 3 QuarterMaster 26 Spline 7.25" Triple 3 Discs Clutch Pack NASCAR

These have wear from racing but might work for you so they will be sold cheap. We now end up only getting around 70% of the item now. Alaska and Hawaii usually cost about double. International is even more yet.

Chevy Aluminum Bellhousing Quarter Master Tilton type Mini Clutch NASCAR Racing

For mini clutch like Quarter Master or Tilton. Quarter Master/Tilton type Aluminum Bell housing ( shown in pictures ). Fits Chevy s mall block & big block engines. sorry we don't have the clutch fork ( what you see is what you get ).

Competition Clutch Stage 2 Organic Clutch Kit For Subaru Impreza 2.0 WRX STi 6MT

Competition Clutch Stage 2 Organic Clutch Kit For Subaru Impreza 2.0 WRX STi 6MT Removed from a 2004 Sti Impreza Loads of life left as seen in the photos

NASCAR QUARTER MASTER 509363 SBF FORD FLYWHEEL BUTTON FOR 8 BOLT 3 DISC CLUTCHES

IT HAS THE RELUCTOR TABS AROUND THE OUTSIDE FOR THE NASCAR EFI SYSTEM (NOT REQUIRED FOR USE). THESE ARE FOR USE WITH THE MORE MODERN QUARTER MASTER 8 BOLT CLUTCHES, NOT THE TRADITIONAL 6 BOLT STYLE AND IS 7.25" CLUTCH SIZE.

Tilton Triple Disc 10 Spline Plates NASCAR Imsa

Tilton 3 plates set all measure .099-.102

Chevy SBC/BBC Bellhousing 12" clutch 4 speed 5-1/8" GM 6263756 Alum 73-87 Pickup

The Chevy Truck Bellhousing 12" clutch 4 speed 5-1/8" GM 6263756 Alum. 73-87 Pickup is a performance part designed for auto performance and racing applications. Manufactured by GM, this bellhousing is specifically designed for Chevy trucks from 1973 to 1987.

COMPETITION CLUTCH OEM For Mitsubishi EVO X 4B11T

STOCK OEM EVO X CLUTCH GREAT CONDITION NO ISSUES

Chevy Steel Blowproof Safety Bellhousing Scatter Shield Ansen Lakewood Racing 👀

Chevy Steel Racing Blowproof Safety Bellhousing (as shown in 12 pictures ). looks like McLeod or Ansen not sure Lakewood ?. fits: Small Block Chevy 265-400 CID & Big Block Chevy 396-454 CID & LT1 engines.

Set of 3 Tilton 29 Spline 7.25" Triple 3 Discs Clutch Pack NASCAR Jerico G-Force

These have wear from racing but might work for you so they will be sold cheap. We now end up only getting around 70% of the item now. Alaska and Hawaii usually cost about double. International is even more yet.

Ford 289-302-351w 5.0 L Fox Body 1979-93 McLeod 8660 Steel Blowproof Bellhousing

Ford289-302-351W Steel Blowproof Bell housing ( as shown in 13 pictures ). looks like a McLeod # 8660 ?. Fits Ford small block 289- 302 - 351W. for condition and wear & ensure item fits your project. sorry we don't have the clutch fork.

Mc Leod RXT ALUMINIUM FLYWHEEL AND TWIN PLATE CLUTCH SMALL BLOCK FORD 1964-95

Mc Leod RXT ALUMINIUM FLYWHEEL AND TWIN PLATE CLUTCH PRESSURE PLATE. FLYWHEEL WEIGHS 5.216 kgs. NO CENTRE PLATES. SMALL BLOCK FORD 1964-95. IF YOU GO TO THE McLEOD WEBSITE TYPE IN 6923-07 OR 563100.

1973 1975 1977 1980 1984 1987 Chevy Truck Bellhousing 12" clutch 5-1/8" 460486

This is a genuine GM bell housing for the 1973-1987 Chevrolet and GMC pickups with standard shift transmission. It may be correct for other years as well. We had it shot peened to clean it and to make sure there were no defects. There are no cracks or other damage present and I’m confident it isn’t broken or damaged. There are no signs of any past repairs. There is a part number of 460486 visible in the photos. PLEASE LOOK CLOSELY AT THE PHOTOGRAPHS. THEY DEPICT THE ACTUAL ITEM YOU WILL RECEIVE. WE DO NOT USE FILE PHOTOS. SHIPPING IS FIXED AT $35 ANYWHERE IN THE CONTINENTAL UNITED STATES.

Vintage ANSEN NHRA Chevrolet Blowproof Bell Housing 5002 T

Retroford TTV racing stage 4 Ceramic Type 9 Escort Pinto Clutch Duratec Zetec

Welcome to my listing for a TTV racing Retroford Stage 4 Ceramic Clutch kit. This has been fitted to a 2.3 pinto with a Type 9 for around 450 miles before changing gearbox to a ZF. As can be seen from the photos there is absolute minimal wear to the clutch plate. The cover was balanced to the flywheel so has some balancing marks. Please see my other listing for the Titan slave cylinder that was used with this.

ANSEN CHEVY GM 2 PIECE STEEL BLOWPROOF SAFETY BELLHOUSING SCATTER SHIELD RARE

SUPER COOL STEEL BELLHOUSING IT HAS THE BACK PARTS. HARD TO FIND COOL PART.

VOLKSWAGEN Formula 3 AP RACING twin plate race clutch + steel lightened flywheel

7.25" twin plate - sintered plates - 7/8 20 spline.

Vintage Ansen NHRA Approved Chevy Blowproof Safety Bellhousing Scatter Shield

Quartermaster Premium 29 Spline 7-1/4" Triple Discs Clutch Pack NASCAR D12

Recycling one ton of cardboard saves over 9 cubic yards of landfill space. Alaska and Hawaii usually cost about double. International is even more yet.

5.5" Quarter Master 325090 Clutch Pack 3 Disc 26 spline Chevy race 061425-6-25

OEM E30, E36 318 M40B18 Clutch Kit

The OEM E30, E36 318 M40B18 Clutch Kit is a high-performance part designed specifically for these vehicle models. This clutch kit ensures smoother and more efficient transmission, providing a better driving experience for those looking to enhance the performance of their vehicle. With a focus on delivering reliable and effective results, this kit is a popular choice for car tuning and styling enthusiasts looking to upgrade their transmission system.

QuarterMaster V-Drive 7-1/4" Double 2 Disc 26 Spline Clutch from a SB Chevy

Alaska and Hawaii usually cost about double. International is even more yet. Look at the pictures and you decide. READ THIS BEFORE YOU BUY. We do not cancel orders. Oct 2 09:10:56.

Quarter Master Pro 7.25" Triple Disc Racing Clutch 10 Spline NASCAR

used triple disc clutch for sbc. the disc seem be in great shape. please see photos any questions please ask.

Hays 91-1007 Hays Street 450 Clutch Kit - GM

It is a great clutch where drivability is the most important factor. This clutch is made to work with the early flat style flywheels found on LS1 and LS6 engines. It will not work with the recessed surface flywheels found on LS2, LS3, and LS7 engines.

PRO SPORT BROWELL BELLHOUSING CLUTCH CAN 8-1/8" TRACTOR PULLER SUPER FHOT FARM

I PUT IT AS USED BUT I THINK IT NEVER BEEN INSTALLED.

7 1/4" QUARTER MASTER #710100 HYDRAULIC RELEASE BEARING RACE 061425-24-25

1 HYDRAULIC CLUTCH RELEASE BEARING. Hydraulic Throwout Bearing Style, Aluminum.

5.5" Quarter Master 325090 Clutch Pack 3 Disc 26 spline Chevy race 061425-9-25

5.5" Quarter Master 325090 Clutch Pack 3 Disc 26 spline Chevy race 061425-4-25

1 RED Aluminum Threaded Coil Over Shock Kit For 5" Spring UMP IMCA RRR18

We have a Used RED Aluminum Coil Over Shock Kit For 5" Springs. Threaded adjuster sleeve is close to 7" Long. Look at the pictures and you decide. READ THIS BEFORE YOU BUY. We do not cancel orders.

Howe Throwout Bearing Hydraulic Flat Face OE Style Stock Clutchs 060925-12-25

Hydraulic Throwout Bearing Style, Aluminum. Throwout Bearing. Howe #82870. 1 HYDRAULIC CLUTCH RELEASE BEARING.

2pc Clutch Kit for Jaguar/Ford Mondeo 624313609

National 2pc Clutch Kit for Jaguar / Ford Mondeo – 624313609. Part Number: 624313609. Compatible with a wide range of Jaguar & Ford Mondeo models. Kit Contents: Pressure Plate & Clutch Disc (2 Piece Kit).

Nissan Skyline Extream Clutch

Extream clutch used,slipped at high rpm on 700+hp conversion probably will. need new drive plates,was a lovely clutch to drive on the road