Rear End

Motive brand 5.00 ratio 9 inch gear Ring & Pinion EDM / REM NASCAR ARCA

This is a standard weight ring and pinion. The gear is in excellent used condition. Features EDM pinion option for internal pump if needed. Gear is also REM polished.

FORD 9" NASCAR 31 SPLINE H CASE G-FORCE BILLET SCALLOPED LOCKER 3.25" GF9LHLW

Up for your consideration is this GeForce H locker part number GF9LHLW. This is a NASCAR used locker that has 946 miles on it. It’s a 31 spline 3.25 inch for a Ford 9 inch. Part is an excellent condition and comes with the bearings as you see in the photos. This is a scalloped locker, which has been done for weight reduction. Check out our eBay store as we have hundreds of different items relating to NASCARR07 engines SB2 engines and many other HMS parts. We will combine shipping on multiple items bought within the same order. Thanks for looking and have a blessed day.

2022 GMC SIERRA 1500 PICKUP 3.42, SU7 Rear Axle 9.50" Ring Gear AAM LOW MILES

3.42 9.50 RING GEAR SU7, NO CALIPERS. SILVERADO 1500 PICKUP 2020 -2024 9.50" ring gear, AAM built (opt SU7), 3.42 ratio (opt GU6). SILVERADO 1500 PICKUP 2019 -2019 new style (mirrors mount on door skin), 9.5" ring gear, AAM built (opt SU7), 3.42 ratio (opt GU6).

CHEVY / GM 3 SPEED TRANSMISSION Bare Main CASE 3837552

CHEVY / GM 3 SPEED TRANSMISSION Bare Main CASE 3837552

Lot of 14 Quick Change Rear End Gears 10 Spline Frankland and Others

One gear says Frankland. Lot of 14 quick change rear end gears.

Laughlin NASCAR Race Car Tubular Lightweight Throttle Accelerator Gas Pedal ARCA

I have a used Laughlin NASCAR Race Car Tubular Lightweight Throttle Accelerator Gas Pedal - IT WILL NEED A MOUNTING BRACKET. Alaska and Hawaii usually cost about double. International is even more yet.

Quick Change Rear End Aluminum 31 Spline Locker Differential WINTERS FRANKLAND

I have a used Quick Change Rear End Aluminum 31 Spline Locker Differential. We removed this from a complete quick change that we took apart. We now end up only getting around 70% of the item now. The largest single source of waste paper collected for recycling is corrugated boxes.

NASCAR LIGHT WEIGHT BILLET FORD 9" REAR END YOKE 28 SPLINE 1350 U-JOINT 4.150"

ACCEPTS A 1350 U-JOINT (1 3/16" x 3 5/8") AND IS AS STRONG AS THEY GET.

QUICK CHANGE GEAR SET 18 Race Car 23/29 TOOTH 6.12 RATIO REAR END Dirt

Here is a used set of 10 spline quick change gears. They are set # 18. Gears have 23/29 tooth count. They are 5.20 ratio with a 4.11 ring and pinion and 6.12 ratio with a 4.86 ring and pinion. I used these in a vintage dirt race car and they worked good, no issues. No chips or major damage on the teeth, good used condition. Any questions please ask

Fuel Injector DIAL A JET Kinsler Enderle ASCS IMCA WISSOTA K&N Hilborn USCS WOO

This is a USEDDial A Jet.

Quick Change gear set 23/25 10-spline in Speedway Motors box

The gears are in a Speedway motors box with a code of 916-81204. The gears are ten splined. The smaller gear has 23 teeth. The larger one has 25 teeth. The outside of the box is marked "5.28". The gears are stamped C528447-1H6 and C528447-2H6.

Winters quick change gears set 28 10 Spline DIRT Modified/Sportsman 6.51/7.57

Used once, possibly never.

Winters Set #16 Quick Change 5.49-6.48 Rear End Gears 10 Spline Frankland

These are the standard 10 spline gears. We have a used set of Winters Quick Change Rear End Gears. This is Set #16. We now end up only getting around 70% of the item now. Alaska and Hawaii usually cost about double.

Johnsons High Tech Performance rear end pump pulley, 6-1/4" OD, NASCAR

HERE IS A JOHNSONS HIGH TECH PERFORMANCE REAR END PUMP PULLEY. THE PULLEY IS 6-1/4" OD WITH V-GROOVE.

Offy OFFENHAUSER QUICK CHANGE GEAR Box HALIBRAND Midget USAC SPRINT CAR AAA

Bolt on and go. Its high-quality performance is unmatched, making it a valuable addition to your vehicle.

Wilwood -8-bolt Holes Drive Plate Red Anodized-aluminum

Wilwood drive plate 8-holes for quick change rear end red anodized

FORD 9" NASCAR 31 SPLINE B CASE STOCK SIZE TRACTECH SCALLOPED DETROIT LOCKER #05

FOR USE WITH 31 SPLINE AXLES.

QUICK CHANGE GEARS SET 10-SPLINE 27/25 4.43/3.80

QUICK CHANGE GEARS SET 10-SPLINE 27/25 4.43/3.80

Steering Column Collapsible Shaft 31 1/2"- 26" IMCA WISSOTA KN NASCAR TRUCK CARS

Rare ARC Quickchange Quick Change 12 Bolt Rear End Cover Hot Rod Sprint Car TROG

Up for sale is a nice used ARC 12 bolt quick change rear end cover . Looks like someone was trying to polish it at one time . Nice used condition no bearings . Take a look at the pictures as they show the exact part that you will receive. Shipping will be $12.00. Thank you for looking!!!!!

Torsen Locker Differential 31 Spline from Winters Quick Change Rear End J1

I have a used Torsen Locker Differential Quick Change Rear End 31 Spline locker. We removed this from a complete quick change that we took apart. We now end up only getting around 70% of the item now.

Quick Change Gear set, 10 Spline 23/30 315/536

brand QCE 10 Spline Quick Change Gear Set 23/30 Teeth 4.11=5.36 23 on top4.11 =3.15

9” FORD HOUSING-RACING-ASPHALT-OVAL-ARCA-XFINITY-NASCAR

HERE IS A PREOWNED FORD 9” REAR END HOUSING FROM MULTI CHAMPIONSHIP ARCA TEAM , VENTURINI MOTORSPORTS . THIS REAR END HAS CAMBER AND CASTER ADDED . ALL MEASUREMENTS ARE IN PICTURES ! THIS REAR END CAN BE SHIPPED THRU UPS TRUCK FREIGHT OR CAN BE PICKED UP IN BLOOMINGTON ILLINOIS . YOU WILL GET THE ONE PICTURED . PLEASE ADD ME TO YOUR SAVED SELLERS SHIPPING COSTS CALCULATED BY BUYERS LOCATION

GEM Set #35 Quick Change 5.80-6.86 Rear End Gears & Storage Case IMCA

These are the standard 10 spline gears. We have a used set of GEM Quick Change Rear End Gears. These are 1.315" wide gears for the older quick change rear ends. & the plastic storage case. This is set #35.

Sprint Midget Parts Wheel Bead Lock 15" x 8 wide ASCS IMCA WISSOTA USAC Extreme

This is for USED Aluminum Beadlock Wheel 15 x 8" 4" back space.

6 NASCAR ALUMINUM 1-1/8" THREAD REAR END TRACK BAR ADJUSTER EXTENSION RODS 23.5"

THE TOP ACCEPTS A 1/2" DRIVE RATCHET EXTENSION WHERE YOU WOULD ACCESS IT THROUGH THE REAR WINDOW. 1 OF THEM AS 10" OF THREADS AND THE OTHER 5 HAVE 11.5" OF THREAD LENGTH.

Halibrand Set 35 Quick Change 5.82/6.86 Rear End Gears 10 Spline with Case

These are the 10 spline. These have a little pitting from getting damp and normal wear from racing but worked great so will be sold cheap. We have a used set of Quick Change Rear End Gears. This is set #35.

1981-86 GM 833 MY6 3 SPEED WITH O/D 3.09 1ST GEAR 4 X 4 10 X 32 SPLINE 1/2 TON

MY6 GM833 NP440 GM 3 speed with over drive. This transmission is for GM 4 wheel drive truck applications, 1981-1986, this tranny has a Iron case and iron adapter housing. 1st gear ratio: 3.09. Let us know if we can help you out in any way with your manual transmission needs.

Vintage Quarter Master Quick Change Gear Set

Found in the shop of a local racing legend. Let us know what type of measurements or information you need.

CYCLONE 301 In Out Box Dog Clutch Racing Ford Midget Sprint Car Hot Rod Vintage

Ready to bolt on and go. It is designed for those who demand the best in quality and reliability, and is made by one of the most reputable manufacturers in the industry.

9 INCH NODULAR FORD REAR, PROSTREET, RACECAR 28-40 SPLINE SPOOL

(You get to select from the following …. (for a alu. through bolt case and 10 bolt alu. 4) SUPPORTS Nodular, Alu. 6 )I HAVE MANY 1962 TO 1970 NODULAR DATE CODED CASES IF YOU ARE BUILDING A NUMBER MATCH FORD.

ford hot rod rat winters quick change gc rear end cover back cap cast Scta Small

ford hot rod rat winters quick change gc rear end cover back cap cast. SHIPS FAST !!! Older small quick change rear cover .. picked up a large lot of vintage Ford hot rod parts .. all getting listed this week .. check out my eBay store for more As is based off the pics …. Properly packed and ships FAST !!! NO RETURNS All orders over $250 will require an adult signature !! Thanks for choosing COUNTRYSIDEDAVE

Quickchange Center Section Halibrand 301W Aluminum Sprint IMCA Model A RAT #2

Quick Change Gears Set 15C 17/18 Tooth 4.35/5.15 Ratio WINTERS QUARTERMASTER

Fast free ship

9" Ford 5.00 Superlite Polished & Back Cut Ring & Pinion GLEASON XTRAK U18

We have another used 9" Ford 5.00 Superlite Polished & Back Cut Ring & Pinion. This is in good shape. It is Superlite Liteweight and standard 28 spline on the pinion. The largest single source of waste paper collected for recycling is corrugated boxes.

Quick Change Rear End Aluminum 31 Spline Locker Differential Black Gold Track

The Quick Change Rear End Aluminum 31 Spline Locker Differential is a high-performance part designed for auto racing and performance driving. Manufactured in the United States, this product features a durable aluminum construction with a 31 spline design for enhanced durability and strength. The black and gold track design adds a touch of style to the rear end differential, making it a standout choice for those looking to upgrade their vehicle's driveline and transmission system. Ideal for enthusiasts looking to improve their car's performance on the track, this rear end differential is a top choice for serious racers. This was rebuilt and has less than 200 laps on it from Dpi

Quickchange Rear Cover DEEP Winters LYNN ASCS IMCA WISSOTA LMS K&N SPRINT Outlaw

This is a USED Quickchange DEEP rear cover. It is a LYNN Winters Cover. It has a CRACK see the last picture.

Used Ford Quartermaster 509360 V-DRIVE BUTTON FLYWHEEL 7.25 7-1/4" CLUTCH Sbf

From roush Yates $400+ new

Vintage NOS 55P 8.2" 10 Bolt 5:38 Gears Unknown Brand

They appear to be NOS, there are no installation marks on either gear. I'm not sure of the year of manufacture, but I am confident that these are 'Made in the U.S.A.'. If you have a Tri-five to '64 Chevy car that never leaves town, and you don't really do much highway driving, these could be fun.

SCS Gearbox Inc 6 Spline Quick Change Professional Gear Set # 3 Thermal Coated

SCS Gearbox Inc 6 Spline Quick Change Professional Gear Set # 3