Camshafts

SB Ford Solid Roller Camshaft Crane .741 Lift 266-280 Duration 106° Lobe Center

Th e specs are 266/280 duration at. 050", the lift is. 732"-.741" with 1.80 ratio rocker arms, the lobe center is 106°. The largest single source of waste paper collected for recycling is corrugated boxes.

Ford 4.6 / 5.4 Variable Valve Timing Disable / VVT Delete Service

You are NOT purchasing cam phasers or any related parts.

Chevy SBC 350 Hydraulic Roller Camshaft 236 Int 242 Exh Duration G1N

Engine Camshaft For Jeep Wrangler Jk 38l 20072011 4781061aa G1N

Billet .657 Lift Roller Camshaft263-269 Duration SB Chevy 119566 Journal 1.868"

We have a used Billet Solid Roller Camshaft from a SB Chevy. Th e specs are 261/271 duration at. 050", the lift is. 655"-.657", the lobe center is 107°. The largest single source of waste paper collected for recycling is corrugated boxes.

REED .795 Lift Solid Roller Camshaft 264-268 Duration SB Chevy SRA297-R302ULX-6

We have a used REED. 795 Lift Solid Roller Camshaft 264-268 Duration SB Chevy SRA297-R302ULX. Th e specs are 264/268 duration at. 050", the lift is. 795"-.738", the lobe center is 106°. The largest single source of waste paper collected for recycling is corrugated boxes.

Custom Kurgan Motorsports Cams 4v 4.6 Turbo Mustang Cobra

Was on a twin turbo 03 cobra. Custom cams from kurgan motorsports. Great drivability and nice chop In great shape No cam card unfortunately

16 SUPERLITE Casidiam Coated .870" Solid Lifters 60 Grams Ford Chevy NASCAR

We have another used set of 16 SUPERLITE Casidiam Coated. 870" Tool Steel Solid Flat Tappet Lifters. They have normal wear and weigh only 60 grams. The largest single source of waste paper collected for recycling is corrugated boxes.

Comp Cams 55 MM 12-309-4 Xtreme Energy .246/.284" Roller for Camshaft LS Chevy

Look at the pictures and you decide. READ THIS BEFORE YOU BUY. We do not cancel orders. Alaska and Hawaii usually cost about double. International is even more yet. NO RESERVE. The largest single source of waste paper collected for recycling is corrugated boxes.

TRW Cam Tp 168 9287-227-44 Rev

16 Xceldyne .937" Keyway Solid Roller Lifters Coated Centered Cups Nascar

From a top NASCAR Team. Look at the pictures and you decide.

Comp Cams 55 MM Xtreme Energy .853 Lift Roller for Camshaft SB Chevy

We have a used Comp Cams Billet Solid Roller Camshaft from a SB Chevy. Th e specs are 262/279 duration at. 050", the lift is. 836"-.853", the lobe center is 108°. Look at the pictures and you decide.

Crane .762 Lift Solid Roller Camshaft 259-267 Duration SB Ford 55 Millimeter

Th e specs are 259/267 duration at. 050", the lift is. 762"-.736", the lobe center is 106°. The largest single source of waste paper collected for recycling is corrugated boxes. Recycling one ton of cardboard saves over 9 cubic yards of landfill space.

13001 9F640 CAMSHAFT SET INT/EX NISSAN PRIMERA P11 MODEL 1999 01 ENGINE QG16DE

Camshaft Assy 119515-14580 11951514580 for Yanmar Engine 3TNV70 3YM20

Fit for Yanmar Engine: 3TNV70, 3TNV70-SSU, 3TNV70-SSU1, 3TNV70-ASA, 3TNV70-QIK, 3TNV70-ASAT, 3YM20,3TNV70-NBK. We will solve the problem for you within 24 hours.

3-Hole, 4 1/4 Turns, #92 Steering Gear Box for Jeep XJ, MJ (84-01), ZJ (96-98)

Only with Power Steering. Case stamped 92. May not include pitman arm or installed arm may be for different application. Part numbers include 52002737 (84-90), 52038002 (91-94), 52038408 (95), 52088015 (96), 52088386 (97), 52088386AB (98), 52088386AD (99), and 52088386AC (00-01).

94-01 Integra OEM engine motor camshaft cam cams shaft & sprocket B18b1 Ls Rs Gs

Off a 98 Acura Integra 2 door Ls model with manual transmission. We want you to be 100% happy with your order.

Comp Cams 55 MM Xtreme Energy .881 Lift Roller for Camshaft SB Chevy

We have a used Comp Cams Billet Solid Roller Camshaft from a SB Chevy. Th e specs are 265/272 duration at. 050", the lift is. 881"-.853", the lobe center is 106°. Look at the pictures and you decide.

Ford Comp cam / Crower hydraulic lifters / 351W / 302 HO FT

You are looking at a Comp Cams cam shaft and Crower hydraulic lifters for 351 W / 302 HO FT the spec sheet is pictured. These have only dyno. Pine City NY, 14871.

16 Morel .937" Keyway Solid Roller Lifters DLC Coated Centered Cups

Look at the pictures and you decide.

Isky Solid Flat Tappet Lifter Camshaft 452 Lift 112° Lobe Center SB Chevy

It looks good. it has a Cam Pro Plus Cam Doctor spec printout sheet with it. The largest single source of waste paper collected for recycling is corrugated boxes. Recycling one ton of cardboard saves over 9 cubic yards of landfill space.

Chevy LS1 LS3 LS V8 Kelford Cams SS108-A 114 LSA Performance Camshaft

Kelford Cams LS Series V8 camshaft, part number SS108-A. This is for Chevrolet LS engines such as LS1, LS2, LS3 and similar platforms. Camshaft is marked : (see last photo)15 49A11402Item is open box.

Delwest Titanium Valves 1.625 X 5.890 Sb2.2

For Sale are a set of 8 Delwest Titanium Valves they are 1.625 diameter, they are 5.890 long with .310 stem diameter, and Bead type lock, they were used in Sb2.2 Heads and only for a dyno session. the picture of the box says they are CV but thats just the box they are in . please ask any questions prior to Buying

Jesel SBC 55mm cam bearings BRG-60110 coated

1 New Jesel 55mm cam bearing for small block chevy part# BRG-60110.

Camshaft Assy 119515-14580 11951514580 for Yanmar Engine 3TNV70 3YM20

Fit for Yanmar Engine: 3TNV70, 3TNV70-SSU, 3TNV70-SSU1, 3TNV70-ASA, 3TNV70-QIK, 3TNV70-ASAT, 3YM20,3TNV70-NBK.

Pipercam 633 for Rover K Series Engine Lotus Mg Rover with Vernier Pulley

Pipercam 633 for Rover K series engines Lotus Mg Rover with vernier pulley, all in perfect condition, no ecu mod required on old mems (they ran on my ‘96 Lotus Elise without problem) Duration 264º Lift 10.0mm Suggested Lift at TDC for good torque on all rpm: Inlet 0.92mm Exhaust 0.80mm About 7000km from new, I’m selling due to engine 160vvc swap, I could sell just one (i would like to instal the second on exhaust of my 160)

Tomei VALC Camshaft Procam Exhaust 274-11.30mm Lift For Nissan GTR R35 VR38DETT

Unused and unopened.

EXHAUST ADJUSTABLE CAM GEAR RSX K20 K20A2 K20Z1 K20A3 K24A K24Z

Nissan Pulsar Gtir Camshaft Sprocket Bolts

nissan pulsar gtir oem camshaft sprocket bolts

BMW E38 E39 E53 M62TU LEFT OUTLET CAMSHAFT EXHAUST CAM VALVE 1745502 1710901 #47

THIS UNIT WAS REMOVED FROM 81000 MILES 2001 BMW 740I.

Ford Pinto camshaft set. for 2L pinto engine. escort, capri, sierra, transit

Used camshaft for a 2l for pinto.

Tomei VALC Camshaft Poncam Intake 258-10.30mm Lift For Nissan GTR R35 VR38DETT

Sold as is.

90-95 Integra Engine Motor Front Exhaust Camshaft & Sprocket 14121-PR4-A00 OEM

90-95 Integra Engine Motor Front Exhaust Camshaft & Sprocket 14121-PR4-A00 OEM

Tomei VALC Camshaft Poncam Exhaust 266-10.30mm Lift For Nissan GTR R35 VR38DETT

Sold as is.

Datsun 240 260 280 280zx Crane Cam

2014-2019 Dodge Chrysler Jeep Cherokee 3.2L TIMING COVER 68137175AA

In the event that a part is supplied and proven to be incorrect or faulty, Bits & Parts Ltd. must be notified within 48 hours. We willALWAYS try our best to help and sort matters together. Part is used and tested and is IN WORKING ORDER!

Exhaust Adjustable Cam Gearbox Rsx K20 K20A2 K20Z1 K20A3 K24A K24Z

⚓ WICHTIG: Bitte überprüfen Sie vor dem Kauf die Teilenummer und die Bilder des Teils. Andernfalls geben Sie uns die Fahrgestellnummer/Fahrgestellnummer um die Kompatibilität dieses Teils mit Ihrem Fahrzeug noch einmal zu überprüfen. 🔰 Wenn der Käufer die Annahme der Sendung aufgrund von Einfuhrzöllen/Steuern verweigert. Es werden keine Rücksendungen akzeptiert und keine Rückerstattung gewährt. Wir versenden alle Bestellungen innerhalb von 2-3 Werktagen nach Zahlungseingang. Wir verpacken alle unsere Artikel sorgfältig, um sicherzustellen, dass sie sicher ankommen. Wir werden Ihnen ein positives Feedback geben, sobald wir Ihr sehr geschätztes positives Feedback erhalten haben. Wir nehmen unseren Ruf ernst. Wenn Sie mit Ihrer Bestellung nicht zufrieden sind, kontaktieren Sie uns bitte und w.

Yamaha Camshaft Lever U7 YG1 YJ1 YJ2 YGI Trail Master YZ280A P/N122-25355-00 NOS

It has been sitting on our warehouse shelf for more than 30 years. We will try our best to solve the problem and provide amicable solution.

Vintage Comp Cams Custom Grind Roller Tappet Camshaft FORD NASCAR Racing

For sale Vintage Ford nascar Comp Cams Custom Grind roller Tappet Camshaft. Check pictures!!! Cam appears to have no damage. We do not have specs for camshaft. Buyer to pay 18.95 shipping. We are clearing out excess inventory from our race shop check out our other listings for many more vintage racing parts!!

Vintage Billet Custom Grind Flat Tappet Camshaft Chevrolet SB2 NASCAR Racing

For sale Vintage chevrolet billet nascar Custom Grind Flat Tappet Camshaft. Check pictures!!! We do not have specs for camshaft. Appears to be no major damage. Cams might have some surface rust from sitting on shelf decades. Buyer to pay 18.95 shipping. We are clearing out excess inventory from our race shop check out our other listings for many more vintage racing parts!!