Cylinder Heads

CV-PRODUCTS 7.050" 5/16" push rods Nascar, Late model

HERE IS SEVEN 7.050 LONG PUSH RODS.

Aluminum Cylinder Heads For SBC Chevy 350 190cc 64cc 202160 Ang G2U

AUTO SPEC 7.800" 5/16" push rods Nascar, Late model

HERE IS SIX 7.800 LONG PUSH RODS. AUTO SPEC.

Pushrods, 7/16" diameter, 8.550 5ea., 8.650 4ea. .080 thick, Comp cams

These pushrods are 7/16" diameter and are .080 thick. I bought a bunch of parts at a racing auction and was told then they are Comps. 5 of them are 8.550 long and 4 of them are 8.650 long. I put used in the description but they appear as if they have never been installed.

EDELBROCK 6025 RPM SMALL-BLOCK FORD 1.90" CYLINDER HEAD HYDRAULIC ROLLER

This is for only one head.

1 GM Performance Chevy R- 07 Ported Aluminum Head #17802715

We have 1 used GM Performance Ported Chevy R-07 Aluminum Heads. These have 6 mm intake and 7 mm exhaust valve stem size. Head has no valves and They have epoxy in the intake and exhaust ports as you can see in the pictures.

RARE ORIGINAL 1980s ARIAS 3 PUSH ROD BBC CHEVROLET HEMI HEADS ROCKER ARMS USED

(NOTE THESE ARE EARLY 1980s STYLE ROCKER SUPPORTS THAT BOLT TO THE HEADS. NOT USING THE HEAD STUDS.). THIS SALE IS FOR ONE PAIR OF ROCKER ARMS ONLY. FROM MY OWN COLLECTION OVER 30 YEARS.

GM LS Aluminum Cathedral Port Heads SB Chevy #12564243

We have a used pair of GM LS Aluminum Heads SB Chevy #12564243. The Guides are 7mm intake & Exhaust valves. Heads are complete with valves springs as you can see in the pictures. The largest single source of waste paper collected for recycling is corrugated boxes.

16 HMS LIGHTWEIGHT STEEL RETAINERS 1.100 OD, 6MM OR 7MM VALVE, NASCAR

HERE IS A SET OF 16 HENDRICK MOTORSPORT LIGHTWEIGHT STEEL RETAINERS. NICE RETAINERS. THEY ARE FOR 6MM OR 7MM VALVES.

Auto Spec 7.050" 5/16" push rods Nascar, Late model

HERE IS SIX 7.050 LONG PUSH RODS. AUTO SPEC.

Pair of Tall Valve Circle Track Covers with Breather Tubes for SB Chevy

Look at the pictures and you decide. READ THIS BEFORE YOU BUY. We do not cancel orders. We now end up only getting around 70% of the item now. You can pick these up in Monmouth, Illinois if you want.

RARE ORIGINAL 1990s ARIAS BBC CHEVROLET HEMI HEADS VALVE COVERS NOS UNUSED

(NOTE CENTER HOLD DOWN BOLT HOLES AND BREATHER VENT HOLES ARE UNDRILLED ). THIS SALE IS FOR ONE PAIR OF VALVE COVERS & GASKETS ONLY. FROM MY OWN COLLECTION OVER 30 YEARS.

CROWER 73614-1 ROLLER ROCKER 1.7 FORD 289-302-351W RACE JESEL T&D 072525-17

CROWER ALUM 1.7 RATIO ROLLER ROCKER ARM FOR 7/16 STUD #73614-1. FITS FORD 289--302--351W ENGINES MAY FIT OTHERS ALSO.

CHEVY RO7 HENDRICK T&D ROLLER ROCKER CODE N 1.850 PIVOT 2.10 RATIO

HERE IS 8 T&D--HENDRICK CHEVY RO7 ROLLER ROCKER. 1.850 PIVOT LENGTH. CODE N AT 2.10 RATIO.

AUTO SPEC 7.650" 5/16" push rods Nascar, Late model

HERE IS ELEVEN 7.650 LONG PUSH RODS. AUTO SPEC.

DEL WEST TITANIUM 5/16 Valve Locks, STD, SUPER 7, NASCAR, VALVE SPRINGS

HERE IS 16 DEL WEST TITANIUM VALVE LOCKS. (enough for 8 valves). HEIGHT------- STD. FITS SUPER 7 RETAINERS.

1969-1970 Corvette Chevelle Camaro Cylinder Heads 3927186

Pair of 1969-1970 Chevy Corvette Camaro Chevelle Nova cylinder heads. Casting number 3927186. Casting date B/11/0. February 11th 1970. These were used on all horsepower 4 bbl engines. These heads have 1.94"/1.50" valves. Special high performance engines came with 2.02/1.60" valves. These 1.94 heads can be opened to accommodate the larger 2.02 intake valves the same way done by the factory. When you do this you have a fresh seat and the valve will sit back up to where it did when new. These heads were rebuilt, however I didn't have the work done so I recommend disassembly and inspection.

AUTO SPEC 7.100" 5/16" push rods Nascar, Late model

HERE IS FOUR 7.100 LONG PUSH RODS. AUTO SPEC.

Mopar Small Block W9 Jesel Roller Rocker Arm Pairs - Used

I have 4 pairs of used Jesel rocker arm pairs for W9 heads. There are a total of 8 rocker arms: 2 left intake, 2 right intake and 4 exhaust rockers as well as 4 shafts. The intake rocker ratio is 1.7 and the exhaust rocker ratio is 1.60.

Chevy SBC 350 205cc 64cc Straight Hydraulic Roller Assembled Cylinder Head

Product Information. While all care is taken, any errors or omissions in the item details is unintentional.

DEL WEST TITANIUM .310 Valve Locks -0.050, DW697,SUPER 7 NASCAR VALVE SPRINGS

HERE IS 16 DEL WEST TITANIUM VALVE LOCKS. (enough for 8 valves). FITS SUPER 7 RETAINERS.

GM SB R07 Ported Bare Aluminum Heads #17802715

We have a used pair of GM SB R07 Ported Aluminum Heads # 17802715. Heads has no valves as you can see in the picturesso it will be sold cheap. The largest single source of waste paper collected for recycling is corrugated boxes.

2 Bare Air Force Research HMS ENFORCER LPC Aluminum Heads SB Chevy

ASSEMBLED OR BARE Bare. APPLICATION Small Block Chevy. MATERIAL 355-T6 High Density Aluminum. Recycling one ton of cardboard saves over 9 cubic yards of landfill space. Alaska and Hawaii usually cost about double.

Auto Spec & cv products 6.600" 5/16" push rods Nascar,Late model

HERE IS SEVEN 6.600 LONG PUSH RODS. 4 ARE CV-PRODUCTS AND 3 ARE AUTO SPEC.

Auto Spec 7.000" 5/16" push rods Nascar, Late model

HERE IS FOUR 7.000 LONG PUSH RODS. AUTO SPEC.

1 GM Performance Chevy R07.2 Ported Aluminum Head #17802715 JR1

We have 1 used GM Performance Ported Chevy R07.2 Aluminum Head. These have 6 mm intake and 6 mm exhaust valve stem size. Head has no valves and They have been repaired and has epoxy in the intake ports as you can see in the pictures.

DEL WEST TITANIUM 5/16" Shoulder Valve Locks .520 long, SUPER 7, NASCAR

HERE IS 16 DEL WEST TITANIUM VALVE LOCKS. (enough for 8 valves). THEY ARE SHOULDER STLYE. THEY ARE FOR SUPER 7 RETAINERS.

1956-1967 283 CHEVY CYLINDER HEADS REBUILT #3748772

The cylinder heads for sale have been cleaned. They are being sold as is.

CHEVY RO7 HENDRICK T&D ROLLER ROCKER CODE P 1.850 PIVOT 2.20 RATIO

HERE IS 8 T&D--HENDRICK CHEVY RO7 ROLLER ROCKER. 1.850 PIVOT LENGTH. CODE P AT 2.20 RATIO.

Chevy SBC 350 190cc 64cc Straight Aluminum Bare Cylinder Head

Product Information. While all care is taken, any errors or omissions in the item details is unintentional.

8) 2.10 Ratio 1.850 Pivot N Code (8) 2.0 Ratio 1850 L Code SB2 T&D Rocker Arms

This is a a set of Hendricks used Rocker Arms. This is a matched set that came out of one of there cars and has a total of 1210537 cycles. Total of 16 rocker arms included these come in the original zip ties set from HMS 8 era 28049 2.0 x 1.850 8 ira 28048 2.10 x 1.850 All are in good condition see pictures Check out our other listings for more great racing items.

Auto Spec 6.650" 5/16" push rods Nascar, Late model

HERE IS SIX 6.650 LONG PUSH RODS. AUTO SPEC.

NEW Xceldyne Titanium valve spring retainers XRE-574-TL coated

New NOS set of 16 Xceldyne Titanium valve spring retainers with Molysil coating part# XRE-574-TL.

8 NEW 6mm CHE BRONZE .500 x 1.800 VALVE GUIDES RACE ROUSH DART IMSA 062617-78

8 NEW BRONZE VALVE GUIDES. SALE IS FOR BOX OF 8 VALVE GUIDES.

AUTO SPEC 7.700" 5/16" push rods Nascar, Late model

HERE IS SIX 7.700 LONG PUSH RODS. AUTO SPEC.

Assortment of Port Plug Fittings in Plastic Case Aluminum & Steel New & Used

Look at the pictures and you decide. READ THIS BEFORE YOU BUY. We do not cancel orders. Alaska and Hawaii usually cost about double. International is even more yet. We now end up only getting around 70% of the item now.

DEL WEST TITANIUM 5/16" Shoulder Valve Locks .545 long, STD, SUPER 7, NASCAR

HERE IS 16 DEL WEST TITANIUM VALVE LOCKS. (enough for 8 valves). THEY ARE SHOULDER STLYE. THEY ARE FOR SUPER 7 RETAINERS.

Extremely RARE SB Chevy Block Tumbling Fixtures from Hendrick Motorsports

One of a kind item with the original paperwork from Randy Dorton. Look at the pictures and you decide. READ THIS BEFORE YOU BUY. We do not cancel orders. You can pick these up in Monmouth, Illinois if you want.

4 JESEL EDCR 2.00 SHAFT ROLLER ROCKER 2.00 RATIO WITH 1.85 PIVOT LENGTH

HERE IS 4 JESEL SHAFT ROLLER ROCKER. THESE ROCKERS ARE 2.00 RATIO AND 1.850 PIVOT LENGTH. NICE ROCKERS.

Chevy SBC 350 190cc 64cc Straight Aluminum Bare Cylinder Head