Equipment Parts
equipment parts — pre-owned
Browse 1,978 equipment parts — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
Bounce Pro 14foot Flex Models Replacement Trampoline Leg Base inchWinch Shaped L
*** NEVER USED / NO RETAIL BOX Bounce Pro 14' Flex Models Replacement Trampoline Leg Base ("W" Shaped Leg) also know as a W-Leg. Length 46-inch.
*** TRUE FITNESS Z5.4 HRC TREADMILL LOWER MOTOR CONTROL BOARD ***
Removed from well cared for and functioning Z5.4 HRC treadmill that had an console overlay button stuck. May fit other models, but not sure - last pic is the ID tag from treadmill it was removed from if that helps with your fitment research.
*** TRUE FITNESS Z5.4 HRC TREADMILL GRADE INCLINE LIFT MOTOR ***
Removed from well cared for and functioning Z5.4 HRC treadmill that had an console overlay button stuck. May fit other models, but not sure - last pic is the ID tag from treadmill it was removed from if that helps with your fitment research.
Icon Health & Fitness Treadmill Control Board MC5100-DTS
Icon Health & Fitness Treadmill Control Board
Replacement Bounce Pro 14foot Flex Model Top Rail without Sockets
*** NEVER USED / OPEN BOX Replace only the parts you need with the Bounce Pro 14' Flex Model Replacement Top Rail (without Sockets). This top rail is for 14' round trampoline that holds six springs.
Bounce Pro 14foot Flex Model Replacement Top Rail with Leg Socket
*** NEVER USED / OPEN BOX Replace only the parts you need with the Bounce Pro 14' Flex Model Replacement Top Rail with Leg Socket.
BouncePro 14foot Round Trampoline Vertical Leg Extension with Holes 6B
*** NEVER USED / OPEN BOX This vertical leg trampoline part is part of the trampoline frame. This piece connects the top rail and the "w-leg". Part Name is BouncePro 14' Round Trampoline Vertical Leg Extension with Hole (6B). Compatible with 14FT Bounce Pro Models: Bounce Pro.
Skywalker Trampoline Pole Cap
Pole cap
Bounce Pro 14foot Round Trampoline Vertical Leg Extension 6A
*** NEVER USED / NO RETAIL BOX Bounce Pro 14' Round Trampoline Vertical Leg Extension for Bounce Pro Model: TR-14ES-FSXT & TR-14ES-FSXE. (Trampoline & Enclosure part List # TVL-14-38.1) PART 6A. Length: 26".
Replacement Bounce Pro 14foot Round Trampoline Frame Pad Navy Blue
***ITEM NEVER USED / NO RETAIL BOX Replacement Bounce Pro 14' Round Trampoline Frame Pad, Navy Blue for Models: TR-14ES-FSXT & TR-14ES-FSXE. The trampoline pad will fit a Bounce Pro model that holds 72 springs.
Replacement UPPER FRAME TUBE for BouncePro 14FT Trampoline Enclosure
*** NEVER USED / OPEN BOX Replacement 14ft Trampoline Enclosure UPPER TUBE. This upper tube is part of the enclosure assembly. It is straight with a small curve at the the top end. Please Note: The enclosure pole is two separate pieces. The lower tube is sold separately. The total length of the Upper tube is 42.5".
Bowflex Dumbbell Cradle Base Tray 5-52 Black Plastic Rubber Non-Slip Portable
Model: Bowflex 5-52 dumbbells (model and Bowflex logo visible on label and top cap). Bowflex Dumbbell Base Tray 5-52 Black. This item is in Used, Surface scratches and scuffs throughout with abrasion inside docking slots.
Vintage 1980s Weider Weight Barbell Linear Ball Bearing Carriage Bushing Clamp
Top part moves up and down, pull it up, release and it springs back.
Rogue Monster Strap Safety System 2.0 (30" depth)
The updated design of Rogue’s Monster Safety Strap Hangers makes them even easier to adjust, with full compatibility across all Monster Series racks and rigs. The Monster Strap Safety System 2.0 features a 3" Wide Reinforced Nylon, safety-rated for 10,000LB.
Precor 447-EFX4X7-18 serial AE23 Elliptical Display Console Assembly
The Precor 447-EFX4X7-18 serial AE23 Elliptical Display Console Assembly is a durable and adjustable display console designed specifically for use with Precor elliptical machines. Made of high-quality plastic, this console assembly is hard and built to last. Its features make it suitable for gym and training purposes, providing users with a clear and customizable display. This assembly is designed to be compatible with Precor elliptical models, offering a seamless integration for a smooth fitness experience.
NordicTrack CX 990 Elliptical Display Console Assembly
It also includes a built-in fan and digital display screen. Wiring harness and internal board are present. Refer to photos and diagram provided for part reference. Shows normal signs of wear from previous use (light scratches/scuffs).
Cybex 750T, 751T, Controller, P/N AD-22395-C-A-2.00 Core credit $75 = $415.00
Life Fitness 7424701 Black Short Roller Pad 9" Vinyl Replacement LF328Black
Life Fitness weight machine roller pad. 9"L. Direct replacement fit. Fast shipping from trusted USA seller. 🇺🇸
SciFit Generator For PRO 1000 Upper Body Exerciser
In used, working condition. Pulled off a unit that had issues with the base. Free shipping to the lower 48 states. Additional shipping charges will apply to other locations. Free 30 day returns if you run into any issues with your order. SKU- shelf 7
Bowflex J Hooks Set Of 2! 3 and 3/4" W Washer And Nut
Bowflex J Hooks Set Of 2! 3 and 3/4" W Washer And Nut.
Total Gym XLS Black Workout Machine Hardware Replacement 92" Cable Pulley
You save $6.00
Precor AMT 12 Elliptical RPM Speed Sensor Reed Switch 2 Terminal Wire 12887-020
Precor AMT 12 Elliptical RPM Speed Sensor Reed Switch 2 Terminal Wire 12887-020 has been tested and functions properly. It includes the two small clips that secure it in place.
*** TRUE FITNESS Z5.4 HRC TREADMILL DC DRIVE 3.0HP MOTOR ***
Removed from well cared for and functioning Z5.4 HRC treadmill that had an console overlay button stuck. May fit other models, but not sure - last pic is the ID tag from treadmill it was removed from if that helps with your fitment research.
Skywalker 12foot Round Replacement Trampoline Part Top Tube
***ITEM NEVER USED / NO RETAIL BOX Replacement Skywalker 12' Round Trampoline Top Tube. This top tube holds 6 trampoline springs (72 for the whole trampoline).
Skywalker Trampoline 15foot Round Replacement Frame Part Top Tube
***ITEM NEVER USED / NO RETAIL BOX Replace only the parts you need with the Skywalker Trampoline 15' Round Replacement Frame Part, Top Tube. This top rail will fit 15FT Round trampolines. It has 8 v-spring holes.
*** TRUE FITNESS Z5.4 HRC TREADMILL MOTOR DRIVE BELT ***
Removed from well cared for and functioning Z5.4 HRC treadmill that had an console overlay button stuck. May fit other models, but not sure - last pic is the ID tag from treadmill it was removed from if that helps with your fitment research.
*** TRUE FITNESS Z5.4 HRC TREADMILL RH END CAP W/FASTENERS ***
Removed from well cared for and functioning Z5.4 HRC treadmill that had an console overlay button stuck. May fit other models, but not sure - last pic is the ID tag from treadmill it was removed from if that helps with your fitment research.
Weider 2980 X 115" Cable Assembly 6031643 OEM Gym Parts Repair
Brand: Weider Model Compatibility: 2980 X + others (see part #) Part Number: 6031643 Length: 115 inches Type: Cable Assembly Material: Steel cable w/ coated sheath Features: • Genuine OEM Weider replacement cable • Fits multiple home gym systems (see part number compatibility) • Includes hardware as shown (end fittings, bolt, washer) Condition: • Used condition • Outer coating shows visible cracking/wear (see photos) • Cable core appears intact but selling as parts/repair only • Canle was in use before I disassembled the machine Notes: • Ideal for repair, backup, or parts • Buyer should confirm compatibility before purchase
Generator - Vision Fitness R70-02
Spirit SR225 / SR 225 SS185 Treadmill PCA Power Supply Board 010276
SR225 / SR 225 SS185. X Series Motorized Treadmill - XT175 - 2005-2010. X Series - XT185 - 2011-2012 (185810).
Control Board/Motor Control Board Set - Spirit Fitness CT850, 2014 Version
Rear Roller - Spirit Fitness Treadmill CT850, 2014 version
Bounce Pro 12foot Round Trampoline Vertical Leg Extension with Two Holes 6B
***ITEM NEVER USED / NO RETAIL BOX BouncePro 12' Round Trampoline Vertical Leg Extension with Two Holes (6B) for Bounce Pro Model: TR-126T-PX & TR-126EN-PX. (Trampoline & Enclosure Part List # 6B.
Skywalker 12foot Round Replacement Trampoline Part Leg Extension
***ITEM NEVER USED / NO RETAIL BOX Replacement Skywalker 12' Round Trampoline Leg Extension. This replacement part is for 12FT round trampolines.
*** TRUE FITNESS Z5.4 HRC TREADMILL FRONT DRIVE ROLLER ***
Removed from well cared for and functioning Z5.4 HRC treadmill that had an console overlay button stuck. May fit other models, but not sure - last pic is the ID tag from treadmill it was removed from if that helps with your fitment research.
Schwinn Air-Dyne Speedometer / Tachometer Gauge Monitor Timer Console
(If planning on mounting this to an Airdyne - this will not work with all models). No mount, no cable. Exactly as pictured. Nothing else included.
Cybex Lift Motor For 530T And 550T Treadmill
Preowned Cybex treadmill lift motor. This was removed from a fully functional 550T machine. Includes mounting hardware.
*** TRUE FITNESS Z5.4 HRC TREADMILL POWER SWITCH ***
Removed from well cared for and functioning Z5.4 HRC treadmill that had an console overlay button stuck. May fit other models, but not sure - last pic is the ID tag from treadmill it was removed from if that helps with your fitment research.
Ritfit Power Cage Buffalo Ritfit Plate
Ritfit Power Cage Buffalo Ritfit Name Plate. Some rust
