Cars, Trucks & Motorcycles
cars, trucks & motorcycles — pre-owned
Browse 16,065 cars, trucks & motorcycles — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
fits M41 Widebody Boat HULL & Hatch Hawaiian Pink catamaran DCB Painted 57046-4
Hull & Hatch, M41 DCB, Never run / Shelf model. If the screws are pictured, they are included. The manufacturers warranty will not be valid in most cases.
vs4-10 chassis , Body Slider , Origin , Pro , Ultra
You’re looking at a nice vanguish pro origin ultra slider. It’s lightly used. It is the derp system.
Hobao HYPER 30 3P Turbo Engine Nitro Used 1/8 Buggy Truggy
Spins over smooth but needs work The item is sold as-is, and you will receive exactly what is shown in the pictures—please examine them closely. All items are tested for quality and sold as pictured. Inspect the images for a detailed view of the condition. If you have any questions or need clarification, don't hesitate to ask. For returns, please contact me before starting the return process. If you're interested in selling any RC items, reach out for cash offers. Thank you for your interest!
1/10 Grave Digger Lexan Body w/ Light - Used
Has scuffs and scratches
Traxxas Slash 2wd Roller Slider Chassis 1/10 With Pro Series 272R Transmission
Pro Series edition 272R Transmission. Traxxas Slash 2wd Roller Slider Chassis 1/10. Roller Slider Chassis - No Electronics. 100% Fully Functional and Ready For Your Electronics. ✔ Need help?. Located in Texas, but willing to travel anywhere in the U.S. for the right deal or large collections.
O.S. Max .12CV Nitro Engine W/ Carburetor. RC10GT RS4 NTC3 4-Tec #1763
Condition is used. The engine has scratches, scuffs, marks, dirt, and oily. (Need Pull Start and One Way Bearing). What you see in the pictures and what you will receive.
LOSI MUGGY
Muggy is in good condition, engine has almost a gal of fuel thru it, it runs strong and stable, it does comes with upgrades please review pics, the steering servo is protek 170 s which is very powerful. Body is ok and usable, tires have wear and tear, 2 front wheels ribs was trimmed to prevent from rubbing and still work as it should with no issues, throttle servo is not that strong but still get the job done. The sale does not comes with radio/receiver, no rx batt, and starting system. You will get what is shown in photo. I have a running video in youtube, just copy and paste, that was the last time i run it, the throttle servo on that video was replaced and its not included in the sale, thanks. https://youtu.be/pcz_hcbWwHc?si=XdJo8GwDIG4TaujV
Axial Wraith Front And Rear Axles
TRAXXAS 1979 Ford Bronco 1/10 Black Crawler Body TRX-4
Used Traxxas 1/10 TRX-4 1979 Ford Bronco black, used but still in decent condition
RC Rock Crawler Chassis Carbon Fiber Rails Suspension Links
Very Nice Traxxas Nitro Rustler 2.5 With Rare Mods Great Compression Spins Free
Older traxxas nitro rustler with very little runtime. Pictures speak for themselves, truck is in great condition, tires aren't ripped, rims are in good condition. Only thing I recommend is cleaning the fuel tank, truck has mainly been sitting on display so it's a little dusty. All electronics work and the engine has phenomenal compression. There is a rare stinger pipe on it along with vintage integy piggyback shocks that hold oil. A arms have been upgraded to traxxas hd arms. This is a very nice truck, my loss is your gain. Feel free to reach out with any questions, due to the nature of the hobby I do not accept returns. You will need a radio and receiver for this truck to be ready to run.
Traxxas Nitro Jato 3.3 Parts Car
Traxxas jato parts car. Motor turns over. includes body
TEAM ASSOCIATED B74.2 ROLLER CARPET CAR W/ JCONCEPTS CUSTOM PAINTED BODY
New jconcepts rear tires on jconcepts wheels and tekno tires and wheels up front. Jconcepts fin turn buckles. Ft upper deck brace. Here we have a very nice 4wd car it's sold as a roller electronics are racers choice.
vanquish vs4-10 Chassis Slider
This is used and new Vanguish vs4-10 chassis. No Canada no Alaska no Hawaii.
Kyosho 2013 McLaren 12C GT3 Mini-Z Body (Orange) MZP256OR
Losi 22 5.0
The Losi 22 5.0 is a 1:10 scale electric buggy model designed for radio control enthusiasts. With the Losi brand known for quality and durability, this model offers compatibility with electric vehicles, making it a popular choice for hobbyists looking to upgrade or customize their collection. Losi 22 5.0 enthusiasts can enjoy a wide range of body parts and interior accessories to enhance their RC model's performance and appearance. Will not come with radio, reciever, charger or battery.
FT Associated RC18T CVD EXTREMELY RARE BLUE ANO MINT Condition, Won't Last Long!
FT Associated RC18T CVD EXTREMELY RARE BLUE ANODIZED MINT Condition, Won't Last Long! I have never seen these before, so I know they are RARE. Awesome condition and so unique I want to keep them for myself. No Deals on these, just grab them while you can. I combine shipping and NO Returns!!! Thanks,
O.S. Max .12CV Nitro Engine W/ Carburetor. RC10GT RS4 NTC3 4-Tec #1762
Condition is used. The engine has scratches, scuffs, marks, dirt, oily, and the top of the cooling head has a crack a piece, as shown in the last picture pointed with the red coloring pencil. (Need Pull Start and One Way Bearing).
Axial SCX24 1967 Chevrolet
The Axial SCX24 1967 Chevrolet is a 1:24 scale electric crawler model designed for hobbyists and enthusiasts aged 17 years and up. Made in the United States by Axial, this gray-colored replica features intricate detailing and is compatible with other Axial SCX24 vehicles. Ideal for collectors or hobbyists looking to add a classic Chevrolet model to their RC vehicle collection, this Axial SCX24 1967 Chevrolet is a high-quality and authentic representation of the iconic vehicle. Used a few times comes rtr. Sold as is
Led Program Card For Hobbywing Ezrun Quicrun RTR Cars Boats Brushless ESC
This Led Program Card Fits Most Hobbywing Ezrun, Quicrun ESC And Most RTR Version ESC Like. For Redcat ESC (10BL50 RTR, 10BL60 RTR, S10E-RTR, Team Redcat MAX-10 80A HexFly HEX10 HEX8 & More That OEM By Hobbywing ).
Fits Traxxas T-Maxx 3.3 49077-3 - CHASSIS 5122X 5197R (bulkhead towers skids
Fits T-Maxx 3.3 CHASSIS 5122X 5197R (length upgrade, bulkhead Towers, 49077-3. The manufacturers warranty will not be valid in most cases. If the screws are pictured, they are included. ).
Scx24 Gx470 Parts Lot Axial
Parts lot off a new scx24 gx470. Comes as pictured. Motor, esc, all the links, drive shafts, misc hardware, shocks, etc. sold within USA only w no returns. All in working order
Fits Traxxas 89086-4 1/10 Wide-MAXX - Plastics (Front Rear Bulkhead skid plates
1/10 Wide-MAXX Plastic Set (Front Rear Bulkhead skid plates Brace box 89086-4. 8920 - Front Bulkhead. 8928 - Rear Bulkhead. 8944 - Skid Plate Front/Rear. 8997 - Toe links, 119.8mm (108.6mm center to center) (black) (2). ).
Kyosho Monster Tracker 2wd (PLEASE READ!)
Condition is used. It shows normal ware and tear from the nature of the hobby. Please look at the pictures because it’s most of the description. It does have dust and dirt on it. Please check out my other listings! Tested and everything seems to work as it should but i think it needs either a new radio or receiver when it gets a few feet away its stops working but than once the radio is close and it links it works again just fine Servo esc and motor all seem to work fine just something is up with the radio system Also will need a battery
Fits Traxxas SLASH 4x4 VXL 68386-4 - DIFFERENTIAL (front rear diff stampede
Fits SLASH 4x4 VXL - DIFFERENTIAL (front rear diff stampede rustler 68286-4. Factory assembled differential, front or rear, with TRA6882 gear set, TRA6879 ring gear & diff bearings! Differentials are removed from new RTR models. ).
Losi mini t 1.0 no body and servo with parts look at description
It’s a losi mini t 1.0 with extra parts and the trunk not tasted it was not ran in a while so I do not know if it works or not it work wan I put it a w so what y see is w you get
Redcat Gen 8 V2 International Scout II Body ONLY Decal Sheet & Box NO CHASSIS
Redcat Gen 8 V2 International Scout II New Green Body, NEW Decal Sheet, instructions and original box only. NO CHASSIS. Body, decals, instructions, and box only. Body has a couple scratches from being on display.
You save $28.00
Fits Traxxas SLASH 4x4 ULTIMATE 68277-4 - SPUR & SLIPPER CLUTCH 54t, platinum
Fits SLASH 4x4 ULTIMATE SPUR & SLIPPER CLUTCH 54t, platinum Rustler 68277-4. TRA3956 Spur 54t (0.8m pitch, compatible with 32-p). Assembled Spur / Slipper Assembly Perfect fit on these Traxxas 4x4 Models: Ruster 4x4, Slash 4x4 ,Stampede 4x4, Rally VXL 4x4.
traxxas Drag Rustler Ss Castle Sidewinder And Other Upgrades
This is an extremely upgraded Traxxas rustler that set up to be a drag car. It has a Kyosho speedhouse motor and a castle sidewinder 3s esc. It’s also extremely upgraded. Upgrades include upgraded Traxxas shocks rpm gearbox traxxas metal hubs pro line reaction hp sc tires I also added a traxxas slash wheely bar savox servo and metal front bulkhead rpm shock tower. It also has an upgraded body as shown. This is a 100mph car project and it all works perfectly. If you have any questions let me know.
Used Traxxas stampede VXL
Used traxxas stampede vxl 2wd with ARRMA granite tires message me if you have questions
Polaris RZR PRO XP / PRO R Carbon Fiber Dash Bezel Trim Cover
Sleek carbon fiber dash bezel, precisely designed for the Polaris RZR PRO XP / PRO R models. This stylish trim cover enhances the interior of your vehicle with a modern, high-performance aesthetic. Offering a snug fit and easy installation, it seamlessly integrates with the existing dashboard. A durable and eye-catching addition, this bezel trim is perfect for off-road adventures, weekend cruises, or enhancing your vehicle's overall appearance. Open box, but item is new/unused. Please see pics. Measurements: • 8 13/16" (Inner Width) • 3 15/16" (Inner Height) • 7 1/10" (Height) • 10 13/16" (Width) Compatible Vehicle Type: Truck Enjoy fast shipping and epic customer service from a trusted seller!
You save $13.46
Subaru Impreza RC Car Body Shells Blue Solberg #5 for RC Cars
Never used RC Body with no cracks or scratches. I believe this is 1/10 scale Subaru Rally Hatchback.
Fits Traxxas Slayer PRO 4x4 59076-3 - DIFFERENTIAL (diff gearbox,front & rear
Slayer PRO 4x4 DIFFERENTIAL (diff gearbox, Revo front or rear 59076-3. Factory Assembled differential. Can be used in the front or rear. If the screws are pictured, they are included. The manufacturers warranty will not be valid in most cases. ).
You save $5.70
L8-0711 team losi TLR 8ight-E 4.0 buggy chassis
We're happy to help.
HUGE RC Misc Parts Lot - Proline Wings/T6.4 Parts/FlyLites/Xray/Mini Z/Hobbico !
FlyLites Light Tubes / White x2 / Green / Blue. -Xray 30 1186 Graphite Pads Lipo Set. -Hobbico HCAP0310 - Banana Plugs x4. -ProLine 6281-02 Clear Front Wings x3. -ProLine 6281 Clear Front Wings x3. HUGE misc RC lot!
Fits Traxxas 89086-4 1/10 Wide-MAXX - BUMPERS (Front & Rear, Includes Mounts
1/10 Wide-MAXX BUMPERS (Front & Rear, Includes Mounts 89086-4. 8934: Rear Mount. 8936: Rear Bumper. 8935: Front Bumper. 8933: Front Mount. If the screws are pictured, they are included. The manufacturers warranty will not be valid in most cases. ).
fits CLASSIC T-maxx (49104) - SHOCKS (8 oil-filled Dampers & springs) Traxxas
CLASSIC T-maxx 2.5 SHOCKS (8 ultra oil-filled Dampers & springs 49104. Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (TRA3762A). PRODUCT LINES. The manufacturers warranty will not be valid in most cases. ).
You save $1.30
Associated RC18T CVD Axels RC18B, Complete (Set of 4) RARE MIP, MINT Condition!
These RC18T CVD are very rare in this condition and price. Complete set of 4 shafts designed specifically for the Associated RC18T models. These swing shafts are compatible with the RC18B, RC18MT, and RC18T buggy vehicles at a 1:18 scale. Look to be the MIP axels? Perfect for those looking to upgrade or replace worn-out or damaged parts, this set ensures a smooth and consistent performance for your RC vehicle. No more lost dogbones and springs. US SHIPPING ONLY NO RETURNS Combined shipping available
d413 Remote Control Car With Sanwa MT-S 4-Channel 2.4GHz Telemetry
as is what you see is what you get not rc car savy but tested and runs really good someone loved this car check the pictures out car has been upgraded that's all know comes with controller already synced to rc car just get your own battery and your set 😀
Traxxas Summit 1/10
The Traxxas Summit 1/10 body shell is specifically designed for electric RC model vehicles in a 1:10 scale. This product is suitable for advanced hobbyists aged 17 years and up. Made by the reputable brand Traxxas, this body shell is compatible with their products and is a high-quality option for customizing and upgrading your RC vehicle. Ideal for those looking to enhance the appearance and performance of their 1:10 scale electric car or truck. For sale is this Traxxas summit 1/10 brushed edition. This truck overall is VERY nice shape! Tires are in excellent condition as well as the body! Absolutely everything works and has no issues at all! No batteries are included! No returns