Helicopters

RC helicopter engine mounts 30-36 and ? sizes all goes in pics

RC helicopter engine mounts 30-36 and?. sizes all go in pics.

Thunder Tiger Raptor 30/50 Canopy

Canopy shows somewhere, the windscreen is cracked in two different spots, however, the general condition of the canopy is good. It comes with the original decals as its scheme. The grommets are in good condition. This canopy has a lot of life left in it. The bottom bracket is missing overall, there are no major cracks in the plastic canopy itself, only the windscreen.

Raptor 30/50 Helicopter Skids

Excellent condition raptor skids. Will work on raptor 30 or raptor 50. Will also work on raptor X50. I have owned and flown a collection of Raptor 50 helicopters for 20+ years, and I have a passion for keeping my models airworthy and flying.

Align 105T M1 Helical&Tail Drive Gear Set For T-REX 700X 760X 800E RC Helicopter

Align H70G013XXT 105T M1 Helical Autorotation Tail Drive Gear Set For T-REX 700X 760X 800E RC Helicopter.

Spartan DS760 Adaptive Heading Hold SMM AVCS Gyro Used

Gyro is untested, I pulled it off a parts helicopter that had no battery. Seems to be in good shape. Ships within 1 business day, thank you for supporting my small business!

Goosky RS4 Electric Flybarless RC Helicopter BNF

Nice condition (Flys great) comes with three batteries and Futaba receiver (S-FHSS). Bluetooth module . Adult owned! Will remove tail boom for shipping. Plus extra parts

JP Mantis RC Airplane 120 Amp Programmable Brushless ESC Opto HV

No box or Manual but never used.

Hobbywing FlyFun 160 Amp 8S V5 Brushless ESC

No lid but never used.

JP Mantis RC Airplane 150 Amp Programmable Brushless ESC Opto HV

No box or Manual but never used.

Watt's Up Watt Meter for RC Vehicles

You can enlarge the pictures to get a better look. All others ask for a quote.

Blade 120SR ~ 5 Item Parts Lot ~ RC 120SR Heli Helicopter

Have been in storage for the past 5 years.

Align Trex 450 (clone)Helicopter digital servos spartan gyro.used RC Helicopter

I built this Align Trex (Tarot) 450 pro clone from scratch. These are great helicopters if you take the time and effort to get it right. This is complete and ready to fly just add your RX,TX and battery. Included is the Taro pro kit with an original Align motor,Hobbywing ESC and has EMAX digital servos on the cyclic and on the tail. The Spartan Quark gyro works flawlessly and has a nice set of carbon blades. LANDING GEAR, BLADE and Boom will be removed to save us all on shipping. See pictures,ask questions do research. !!!!!This is sold AS Is due to the nature of the hobby since this hobby has a steep learning curve!!!!!!! All Align Trex 450 pro parts are compatible and readily available.

Kyosho He-18. Concept 30 Sx Sticker Sheet

Package was opened, but sticker sheets were not used. What you see in the photos is what you get Item sold as is

SAB Carbon Fiber Tail Boom (700 Size) XBLADES 713

SAB boom, 713 X Blades and tail blades.

Raptor 30/50 Helicopter Skids PV0035-2

Excellent condition raptor skids. Will work on raptor 30 or raptor 50. I have owned and flown a collection of Raptor 50 helicopters for 20+ years, and I have a passion for keeping my models airworthy and flying.

Gaui RC Helicopter Canopy Red/White/Black Skull Graphic for 300CFX 1:12

Gaui RC Helicopter Canopy Red/White/Black Skull Graphic for 300CFX 1:12

Lot Of Heli Parts Blade 360 Follower Arms BLH4707 HN7100AT Align See Pics F6.2

Lot Of Heli Parts Blade 360 Follower Arms BLH4707 HN7100AT Align See Pics Trex 450 Pro Slant Thread Main Drive Gear 121T H45156QA Linkage Rod Set. What you see is what you get, no returns accepted.

RC helicopter washplate bundle, 8mm & 10mm shaft.

RC helicopter washplate bundle, 8mm & 10mm shaft. No returns

E-flite Mini Helicopter 6 pack tools

E-flite mini- helicopter tools. 6 pack. If used was very minor. Includes #00 phillips, #0 Phillips, 2.0mm flat, 1.5 mm, 2.0 mm, 2.5 mm.

Mercury Optimax 20” 47 Hours GEAR HOUSING ASSEMBLY Complete 9011J33 Lower Unit

Super low hours used lower unit, 47 original hours. Removed from 2008 mercury optimax

425mm cf helicopter rotor blade

you are bidding on a pair of carbon fiber main rotor blades 425mm from a blade 500 helicopter. These may fit other helicopters as well. There is a chip on the tip of one of the blades as seen in the pictures, but the blades are still useable.

SAB 690 Main Blades / TREX 700

Good used set as pictured.

ALIGN Feathering Shaft Wrench - T-REX 450/ 500

Works 100%

3x SPMSH3056M 3056M MG Servo Blade 235 S 235S V2 RC Helicopter Replacement

RotorTech 106mm Tail Ultimate Rotor Blade Set [RT-106] 3D

RotorTech blades are finely crafted premium carbon fiber rotor blades from Fun-Key Aeroplane Models. Length: 106mm. Root Size: 5mm.

Lot of 3 Helimax Novus Main Drive Motors

JR Vibe 50 Washout assembly

JR Vibe 50 Washout assembly. No returns

Royal Align Trex 500X Canopy Body Shell

Has a few cracks, please see photos

Theta Servos Razor-T1 Brushless High Voltage Tail Servo Program Box

Raptor 30/50 One Way Clutch With Clutch Shaft Pv0019 And Pv0020

Used in good condition. You will be getting the full package: one way clutch and one way clutch shaft part numbers pv0019 and pv0020

thunder tiger raptor 30 86T main gear AK0031

Used but in very good condition. This part has many more hours of flying left in it. I have owned and flown a collection of Raptor 50 helicopters for 20+ years, and I have a passion for keeping my models airworthy and flying.

BLADE AL X003T509C3

THERE ARE NO EXCEPTIONS! VENUE WILL TAKE PLACE IN BROWARD COUNTY, FLORIDA. THERE ARE NO EXCEPTIONS.

O.S. .91 HZ Competition 3D Helicopter Engine

For Parts Or Repair. No Scoring Just Rough From Sitting.

BLADE Fiberglass Canopy 330S Replacement Helicopter Parts

BLADE Fiberglass Canopy 330S Replacement Helicopter Parts. Condition is Used. Shipped with USPS Ground Advantage.

Bay Blade Lot Of 11 Plus Extras

Good overall condition See pictures

Thunder Tiger Raptor 30/50 Canopy

Painted dark red, the Canopy shows some wear, the windscreen is missing, so you will Need to make or find a new windscreen, however, the general condition of the canopy is good. This canopy has a lot of life left in it. overall, there are no major cracks in this plastic canopy.

Thunder Tiger Blade Balancer for RC Helicopter, part #1077 / Open Box

Thunder Tiger #1077 RC Helicopter Blade Balancer – Open Box, but looks unused. Properly balanced blades can reduce unwanted vibration, improve rotor smoothness, and help protect bearings, linkages, and other components from unnecessary wear.

Blade 120 SR parts only flies but spins left.

Comes with extra parts. - 2 Tail rotors - 1 red Canopy - 1 set Main rotors - 1 set landing gear - 1 extra Tail motor and rotor motor not tested.

JR Vibe 50 Main Rotor Hub - 996138

JR Vibe 50 Main Rotor Hub - 996138. No returns

Genuine Align Trex 500 ESP Main Gear Assembly

Upgrade or repair your helicopter with this precision-engineered main gear assembly from Align.