Engines

Maytag Model 72 Twin Parts Engine

For sale I have a Maytag model 72 which is stuck . But there are lots of good parts here. Please see pictures . If you have any questions , Please ask . Thanks

Vintage Briggs & Stratton Kickstart Engine WMB For Parts Restoration Original

This is an engine I bought in a group with the hopes of restoring. Turns out I have too many projects. This has a lot of good parts and is a great start to a restoration project. The engine is currently stuck (does not turn over).

Scat Trak 1300 Kubota V2203 51 HP Diesel Engine - USED

Scat Trak Skid Steer Kubota V2203 Engine - USED. Kubota V2203 DI or IDI(Direct Injection or Indirect Injection). We need the old engine complete in order for our engine to work in the place of the V2203.

Rare Tecumseh Engine Model LAV25 - 200234 Vertical Shaft Spring Start Motor Runs

This motor is running. We put fresh oil and spark plug in it and it runs nicely.

Briggs & Stratton XR 1150 Professional Series Horizontal OHV Engine Motor

Great running engine. Comes with original carb and replacement oem carburetor. This was on a friend of mines sawmill and we decided to put a larger 18hp engine on it. Motor is it Great condition and very well cared for. I don't know the hours on it but probably not much. 250cc 1" x 2 7/8" Shaft. Will be shipped dry no oil. Free shipping to the lower forty eight states.

72 Air Tube

Air tube, fit in block, held by set screw, no sealer needed.

Model 72 MAYTAG Twin Cylinder Engine Generator Base 9.5" D Flywheel Serial 45544

If you decide you don't want it or find another one cheaper, I won't take it back. Most of my parts are listed "AS IS" and are in unknown working condition, unless otherwise stated. Condition: Due to age this item is being sold "AS IS".

Vintage Antique Clingon engine

numbers on the side, cant see the name on it, turns over, has compression.

Single cylinder vertical steam engine, approx. 3.5" bore x 4" stroke id:1001

Single cylinder vertical steam engine, approx. 24" long, 20" wide, 40" tall.

Briggs & Stratton 1150 Series Engine 250cc Deere 827E

This came off a Deere 827E snowblower. Hopefully any technical info can be seen in the photos. I started it to test it, but have not actually seen it in use to know if it need any tuneup work. Selling as is.

Power Products Engine Runs good

For sale I have a Power Products engine in good shape . This engine starts easy and runs good. Carb was taken apart and cleaned . Pints and plug was cleaned .This engine has muffler and throttle assembly . Needs small amount of cleaning .Small wooden stand does not sell with engine.

Briggs and Stratton model I N air cleaner elbow

For sale is a used Briggs and Stratton model Briggs and Stratton model I, N air cleaner elbow. This is the tall type.

Original John Deere Model E Instruction Book & Repair List Book Gas Engine Motor

Nice condition

Scat Trak Kubota V2203 51 HP Diesel Engine - USED

Scat Trak Skid Steer Kubota V2203 Engine - USED. Kubota V2203 DI or IDI(Direct Injection or Indirect Injection). Right now we have (3)+/- Kubota V2203 Engines. We need the old engine complete in order for our engine to work in the place of the V2203.

Stover Hit & Miss Engine Original

Stover Hit & Miss Engine Rough shape, small crack in head and locked up for parts or repair.

Wisconsin Gas Horizontal Engine on Gorman-Rupp Trash Pump

The product is a Wisconsin Gas Horizontal Engine paired with a Gorman-Rupp Trash Pump. The engine is powered by gas and has a model number of AENLD. This combination is commonly used in stationary engines for various industrial and business applications, providing reliable and efficient power for light equipment and tools.

HOT 6V THORDARSON Low Tension Ignition Coil Hit Miss Gas Engine w/ Igniter

I have been collecting hit miss engines for 35+ years and I am very knowledgeable. (not for use with a spark plug). If you decide you don't want it or find another one cheaper, I won't take it back.

Vintage Briggs Stratton Washing Machine Engine WMB. Runs. Free Shipping.

Older restoration.

Antique Iron Horse Generator 4 Cyl By Johnson Motor Co. ILL. USA

1920's-30's Iron Horse Generator.....4 cycle...Original unpolished condition, does show wear. Spins, may need repair....See photos

Power Products Engine Runs good

For sale I have a power Products engine . Carburetor was taken apart and cleaned as were the points and magnets and spark plug. Engine needs small amount of cleaning Engine starts easy and runs good . Small wooden stand does not sell with it .

Shop Hobby Made RUNNING MACHINED HIT MISS MODEL GAS ENGINE MODEL 5.5" FLYWHEELS

This is a fully functional and hobby machined gas engine model with 5.5" flywheels. Made by a Hobbiest with very good machining skills and welding skills, this Hit & Miss model is perfect for collectors and enthusiasts alike.

1929 Maytag Model 92 Restored Runs good

For sale , I have a 1929 Maytag 92 engine. This engine was taken apart , wire brushed and painted while in pieces . Head was honed with new rings and gaskets .Engine starts and runs good . Engine has new decals and is ready to show .

Maytag Upright Hit & Miss Gas Engine Pick Up Tube Original

Maytag Upright Hit & Miss Gas Engine Pick Up Tube is new, new screen. I have been selling for more than 22 years around the states of Illinois and Florida. Thanks for your interest in my items.

Sentinel dual cylinder Steam powered Marine steering gear, id:995

Mfg. in Scotland, we don't know what vessel it was in service on, wild cat for X" size chain drive.

Vintage Novo Hot And Miss Engine Brass Engine Tag 1 1/2 Hp Novo Lansing Mi.

His brass tag is from a Novo 1 1/2 hp engine. It is a replacement or reproduction tag. Please look at pictures.

Briggs & Stratton Model N Aluminum Intake Elbow

For sale is a used Briggs & Stratton Briggs & Stratton Model N Aluminum Intake Elbow.

3 Champion W18 518 7/8 Spark Plug Hit & Miss Gas Engine - Good, Clean, Used

The Champion W18 518 7/8 Spark Plug is a reliable and durable component designed for gas-powered hit and miss engines. Manufactured by Flywheel Supply, this spark plug ensures good performance and clean operation in various industrial and light equipment applications. With a focus on quality and compatibility, this product is a valuable choice for those looking to maintain or upgrade their stationary engine.

Briggs and Stratton model I Valves Springs Keepers

For sale is a used Briggs and Stratton model Briggs and Stratton model I Valves, Springs, Keepers.

Vintage Antique briggs and stratton engine Type 306214

VTG Briggs, turns over, has compression.

Brass Oil LIne Gauge Hit & Miss Fairbanks Steam FIG. 530 Size #1

The Brass Oil Line Gauge Hit & Miss Fairbanks Steam FIG. 530 Size #1 is a unique and valuable tool for determining the proper size of oil lines for steam-powered engines. Made by Flywheel Supply, this gauge is specifically designed for hit and miss engines, providing accurate measurements for a seamless operation. This product is essential for ensuring the optimal performance of vintage and antique steam engines, making it a must-have for any collector or enthusiast in the business and industrial sector.

VAUGHAN 4hp HIT & MISS STATIONARY ENGINE model D for LOGGING DRAG SAW antique

Vaughan hit & miss gas engine from a logging drag saw -- Model 'D' rated at 3.5 or 4 hp. "VAUGHAN MODEL D LIGHTWEIGHT "STANDARD MACHINE". Lubrication: grease cup on crank bearing, oil dripper on connecting rod.

Kubota KX-121 Diesel Engine - USED

Kubota V2203 DI or IDI 51 HP Engine - USED. Kubota V2203 DI. Right now we have (3)+/- Kubota V2203 Engines. 47-51 HP (4) Cylinder Diesel Engine. 4 Cylinder Diesel Engine. We need the old engine complete in order for our engine to work in the place of the V2203 and/or V2203M.

Maytag Gas Engine Model 92 Tank Bolts

Briggs and Stratton model I Throttle Control

Tube is brazed on to mounting bracket.

Lauson TLC-366 Engine Aluminum Cylinder Head

For sale is a used Lauson TLC-366 Engine Cylinder Head.

Rumely Watts Corn Sheller Olds Gas Engine Postcard

Rumely Watts Corn Sheller Olds Gas Engine Postcard

Maytag Gas Engine Model 92 Crankshaft Support Bushing Bolts Acorn Style

These are the Acorn Style.

4 Count GITS BROS Drive In Oil Cups Covers Lathe Hit Miss Magneto 3/4" NPT

They have a 3/4" NPT opening on the bottom and 1-1/8" on the top. It stands 1-3/8" Tall. (LL-B-Box 348).

Mustang Skid Steer Kubota V2203 51 HP Diesel Engine - USED

Mustang Skid Steer Kubota V2203 DI 51 HP Engine - USED. Kubota V2203 DI or IDI (Direct Injection or Indirect Injection). Right now we have (3)+/- Kubota V2203 Engines. We need the old engine complete in order for our engine to work in the place of the V2203.

Vintage Briggs & Stratton Engine WMB For Parts Restoration Original Go Cart

This is an engine I bought in a group with the hopes of restoring. Turns out I have too many projects. This has a lot of good parts and is a great start to a restoration project. The engine is currently stuck (does not turn over).