Calibrators

FLUKE 719PRO 30G PRESSURE CALIBRATOR KIT (PARTS ONLY) FOR PARTS

The FLUKE 719PRO 30G Pressure Calibrator Kit is a premium product manufactured by Fluke, a reputable brand known for high-quality measurement instruments. This calibrator kit is designed specifically for pressure calibration, ensuring accurate and reliable results. Made in the United States, this kit includes essential parts for maintaining and repairing pressure calibrators, making it a valuable asset for businesses and professionals in the field of testing and measurement.

Kaye RTD IRTD-400 Temperature Reference

Last calibrated in 2024

Veeco 50 KA Step Height Standard

This is a Veeco 50 ,000 Angstrom Step Height Standard. Used normally for metrologic / calibration applications. Does not have certificate of calibration. Very good condition

Fluke 718 100g Pressure Calibrator ..Comes on~ Cosmetic on Case

Unit itself is fine.Seal on back has been broken but seems normal on this model from use. has not been opened.

EDC Electronic Development Corporation MV106G DC VOLTAGE STANDARD

INVENTORY: CTEK B12-3.

Starrett - Repeat Reading Gage/Repeat-o-meter Surface Plate Calibration - QG42

Model 81320.

Fluke 5100A 5100B 5101B Calibrators, Lot of 3, A12/A13 Wideband Cards, Extras

A working 5100B could likely be made from swapping boards and parts. Sold as-is! Two have Wideband cards installed, one has the front-panel tape recorder option. The third unit does not power up, the front power switch has been disconnected.

Data Precision 8200 Programmable DC Voltage Current Calibrator GPIB WITH OPTIONS

Note taking was diligent. We can not confirm, so all units are sold as is.

Fluke 700PD6 Pressure Module

Part 33815.

HP 58503A Frequency Time GPSDO standard with all accessories, date OK, #26001

Fluke MD88 Matco Tools Automotive Meter

This item is in excellent pre-owned condition. Includes hard Fluke case shown. Includes RPM and accessories as shown. Screen Protector. Part 33752.

AMETEK Crystal XP2i 1000 PSI Digital Pressure Gauge

It works perfectly. Includes rubber boot as seen.

Fluke 787 ProcessMeter Calibrator Meter Multimeter

This item is in excellent pre-owned condition. There is a screen protector on the display. The display / lens below is flawless and free from any scratches or other blemishes. Part 33709.

Fluke 725 Multifunction Process Calibrator

Item will be made available for pick up at our San Diego, CA, USA location by the carrier you arrange transportation with. 1 Each | FLUK-1547849 | Product Manuals on CD for 725. 1 Each | FLUK-3477369 | Safety Info for 718, 719, 724, 725, 726.

HP 58503A Frequency Time GPSDO standard with all accessories, date OK, #26002

Stanford Research Systems FS725 with Rb Failure

ST2 0 (no error). ST6 0 (no error). ST4 1 Frequency lock disabled.

AMETEK JOFRA HPC600 020C G HANDHELD PRESSURE CALIBRATOR

AMETEK JOFRA HPC600 020C G HANDHELD PRESSURE CALIBRATOR Comes with what you see in pictures, inspect carefully. May be missing cords

Altek Simulator RTD Series 11 Calibrator 100 OHM Platinum (All Settings Working)

Altek Simulator RTD Series 11 Calibrator 100 OHM Platinum

Used Working AMETEK CRYSTAL PRESSURE XP2i DIGITAL TEST GAUGE 0-30 PSI

• Model: XP2i Digital Pressure Gauge. • XP2i Gauge as shown. • Installed fittings/couplers. Unit powers on and appears to function normally.

GE Druck Multifunctional Calibrator, Genii, DPI620G

GE Druck Multi-functional Calibrator, Genii, DPI620G. Item being sold is pictured above and also comes with a working battery and power cable. Item has not been fully tested but looks to be in good working order. Selling the item in the picture and power cable/battery. We do have 2 of these available. Selling as is, no warranties, no returns, and all sales final.

Altek, 334A Loop Calibrator RDEQ

Manufacturer: Altek. Model: 334A. JM Test Systems complies with ANSI/NCSL Z-540 and ISO 10012-1.

Beamex Calibration Vacuum &Pressure Pump set PGV & PGM In Case Free Ship

Beamex Calibration Vacuum &Pressure Pump set PGV & PGM In Case Free Ship. Listed as used but everything is in super nice shape and if used it was barely. Case has some light surface wear from storage. Contents are in excellent really nice shape. Comes as seen in photos free shipping C-1

SI Hydraulic Pressure Pump HTP1 1000 Bar /15000 Psi

Not a lot I know about it except great build quality , has some liquid inside it I need to get out but haven’t figured it out yet,

Nice Fluke 700P09 Pressure Module - 1500 PSIG, 10340 kPa, 103 mbar

Actual module shown. Well cared for and just out of service.

(2) Ametek Type K PK-854WC Pneumatic Dead Weight Testers with additional weights

Both testers are mounted on a painted steel base with an acrylic cover.

Pacific Scientific T5 Cable Tensiometer With Case T5-8005-110-00 REV N

General Radio 1557-A Vibration Calibrator

Bruker Calibration Step Height Standard 301-113-8um Metrology AFM Calibration

Model: Step Height Standard. Certified Step Height: 7.9 +/- 1.6 nm. The unit and its protective case show minimal signs of use and handling. The standard in the case is fully intact and legible. Model Number/MPN: 301-113-8nm.

BENTLY NEVADA TK3-2E PORTABLE VIBRATION CALIBRATOR KIT MODEL:14700-02

MODEL : 14700-02. WE ARE NOT AN AUTHORIZED DISTRIBUTOR OF ANY LISTED ITEM. MADE IN THE USA.

Crystal XP2i Digital Test Gauge 5000PSI

The Crystal XP2i Digital Test Gauge is a high-quality pressure calibrator capable of measuring up to 5000 PSI. Made in the United States by the reputable brand Crystal, this product is designed to provide accurate and precise measurements for various industrial and business applications. Its compact and portable design makes it easy to use on the go, while its digital display ensures quick and easy readings. The XP2i Digital Test Gauge is a reliable tool for maintaining and testing pressure systems with confidence.

Fluke 715 VOLT/mA Milliamp Process Calibrator Meter

Electronic Development Corporation Programmable DC Calibrator Model 522

Electronic development corporation(Krohn Hite) Model 522 programmable DC calibrator. Powered on to test, no further testing done. Unit may need calibration to be put into service. As is, best offer, no returns. Does not come with power cord. Thanks for shopping and feel free to message with questions offers etc.

Meriam Instrument Meri-Cal Manometer Differential Pressure Calibrator DP200I

Meriam Instrument Meri-Cal Manometer Differential Pressure Calibrator DP200I. Condition is Used. Shipped with UPS Ground.

Fluke 718-300G Pressure Calibrator 12 - 300 PSI (SEND OFFERS)

THE OPERATIONS MANGER AT THIS BUYOUT SAID "THAT DOESNT WORK". I HAVE NO OTHER INFORMATION. Note taking was diligent. We can not confirm, so all units aresold as is.

Emerson HART 475 Field Communicator V3.9 w Soft Case

Software version 3.9.

Meriam Meri Cal DP2000I Digital Manometer Calibrator w/ B-34686 Pump, Leads Set

Includes the A/C adapter Pump and leads and carrying case. all accessories shown are included. pictures of actual item.

Altek 434 Milliamp Calibrator Quik-Chek

Fluke 771 Milliamp Process Clamp Meter FREE SHIPPING

(see pictures).  Best in class 0.2% accuracy.

GR General Radio IET Labs Type 1615-A Capacitance Bridge 1615A

Inter-comparison of capacitance standards diff ering in magnitude by as much as 1000:1. Lever balance, in-line readout.

Horiba MEXA-120NOx Calibration Unit 120 NOx #881562800111

No power cord or any other accessories included. Sold as pictured.