Other Calibrators

CPI Indi-Check Dial Digital Indicator Calibration System Model 3380R - Metrology

CPI has a nice online video explaining the use of this system. INDI-CHECK Digital Display Readout Module: Features clear, crisp red LED indicators. Output: RS-232 SPC Interface.

NIST SRM 2532 Standard Reference Material Silicon Wafer with 100nm SiO2 Layer

NIST SRM 2532 Standard Reference Material Silicon Wafer with 100nm SiO2 Layer.

IIW Calibration Block - Type 2 1018 Steel NDT ultrasonic inspection

Agilent E5299-65001 (E5299-65401) Low Current Calibration Adapter

This is an Agilent (Keysight) E5299-65001 (replaced with part number E5299-65401) Low Current Calibration Adapter. This adapter is designed to use with Agilent E5260A, E5262A, E526eA or E5270B Semiconductor Parameter Analyzers. It is in very good condition, but I have no way to test it.

VTG General Radio STANDARD INUCTANCE 1.0mH 0.1% Inductor Calibrated-able Lab GR

Hamfest find from a Quasar lab -- Vintage General Radio 106G standard inductance inductor 1.0mH 0.1% at 1 Khz DCR 1.75 ohms, inductance is calibrate-able with the proper equipment which I don't have, I was able to get it to 1.00 mH with my inexpensive multi function tester. Nice and clean inside, exterior with the usual light wear, no cracks or chips in bakelite, original GR tag replaced with Quasar, , , please see photos.

HP 58503A Frequency Time GPSDO standard with all accessories, date OK, #26002

Keysight (Agilent) 85052B

It includes open, short, and load devices, sex-changing adapters, connector gauges for interface integrity, and torque wrenches to ensure proper and repeatable connections. Ideal for advanced RF testing applications demanding precision and durability.

Symmetricom TimeCesium 4500 PRS-4500 Atomic Clock Frequency Standard Untested

• Cesium Primary Frequency Standard. • Type: Cesium Frequency Standard.

Ralston QTHA-KIT4-SS Universal Quick-Test Hose & Adapter Kit WITH EXTRAS

Ralston QTHA-KIT4-SS Universal Quick-Test Hose & Adapter Kit WITH EXTRAS. Condition is Used. Shipped with UPS Ground.

HP Agilent 85130F Adapter Kit 2.4mm-3.5mm (m&f)

Model No. 85130F. At Silicon Salvage, we turn the complex challenge of e-waste into a clear, secure, and sustainable process. — the answer is Silicon Salvage. Silicon Salvage is not an affiliate, representative, or authorized distributor for any manufacturer listed unless explicitly stated.

Skidmore Wilhelm Model HS Bolt Tension Calibrator 170,000 LBS w/ Bushing Plates

MAKE: Skidmore Wilhelm. MODEL: HS - 170,000LBS. HS 520 1-1/4". HS 720 1-1/4". HS 524 1-1/2". HS 724 1-1/2".

Maury Microwave K7005F WR42 Calibration Kit K314 K301 K340 K210C1 K103A4 K230K6

Orders are subject to U.S. Export Administration Regulations (EAR) and must comply with all applicable export laws. Diversion contrary to U.S. law is prohibited.". Silicon Salvage is not an affiliate, representative, or authorized distributor for any manufacturer listed unless explicitly stated.

RADeCO D-8528 Air Flow Calibrator - Untested

AMCS Parker NIST Traceable Calibration device - PH 100905 - Allen-Bradley?

HP/AGILENT 41423A HIGH VOLTAGE SMU CALIBRATION KIT

Set of the following calibration kit items: HP/Agilent 41423-60012 High Voltage Unit (HVU) Calibration Adapter, HP/Agilent 41423-60011 High Voltage Unit (HVU) Calibration Adapter, HP/Agilent 04142-61041 Precision Resistor Load Module, and HP/Agilent 41423-61601 Dual Coaxial High-Voltage Calibration Cable Assembly (I believe that is the part number for that cable. This is definitely the cable assembly in the picture). This kit is associated with calibration of HP/Agilent 4142B system. Believed to be properly operational, but I have no way to test it.

Leeds & Northrup Company 4221-B 0.10 Ohm Standard Resistor/ Current Shunt

Leeds & Northrup 4221-B 0.10 Ohm Standard Resistof metrology grade 3 Amp (+/-0.001%) or 10 Amp (+/-0.05%). Usable for high accuracy DC Current measurement. If calibrated by a standards lab, and using Alpha & Beta coefficients, uncertainties as small as a few ppm are possible. Guaranteed to be in proper working condition. Do not have a calibration certificate.

HP 58503A Frequency Time GPSDO standard with all accessories, date OK, #26001

Additel 925 Hydraulic Pressure Test Pump w/ Ashcroft 302089SD02L800# Test Gauge

Both the pump and the gauge are in great condition. We decided to leave the liquid inside the pump since we don't know how to properly drain it. BATTERIES FOR THE GAUGE WILL NOT INCLUDED . We will do our best to help resolved any issues you may have.

GPSDO 10MHz GPS Disciplined Clock with Antenna&Display Sinewave or Squarewave

ALM:alarm led,on:frequency deviation accuary>0.1Hz,off：frequency deviation accuary<=0.1Hz. - Front panel:10MHz:10M sine wave output or square wave. - Rear panel:DC-IN:12V power input，5.5-2.1 socket，inside is positive ,ouside is negative.

TESA Dual Probe Gage Block Comparator - Model UP - W/ DRO, Air Pump, pedal - QJ2

NIST SRM 1358 Certified Coating Thickness Calibration Standard

Standard Reference Material 1358. The coatings are electrodeposited copper with a thin layer of chromium for wear resistance on steel substrates, which have the magnetic properties of AISI 1010 steel.

RC Component Substitution Selector Box 1940s Wood Rotary Switch Ohm MFD Untested

Handbuilt wood cabinet resistance and capacitance component selector/substitution box, 1940s-1950s; features two rotary selector switches with labeled resistance values (10 ohm to 22 meg) and capacitance values (.005 mfd to 1 mfd), cane grill front panel, tube connections on bottom panel; untested, sold as-is; heavy wear on wood exterior, 7"x11.5"x11.5", 6.5 lbs.

EDC MV105G Millivolt Calibrator Source Electronic Development Corporation

Good working, lightly used condition vintage EDC MV105G M-Milli-volt calibrator source. Comes exactly as shown in pictures ready for use.

Skidmore Wilhelm MS Bolt Tension Calibrator, 100,000#, 7/8", 3/4", 1" Adapters

Model: MS. 100,000#. Includes 3/4" and 1" bolt adapters as shown in pictures. Includes Pelican Case.

Ametek Jofra DK-3520 LPCA Low Pressure Temperature Calibrator & Pump Set

Ametek Jofra DK-3520 LPCA Low Pressure Temperature Calibrator Set

Waters Torque Watch 6500-T2 Torque Calibrator Precision

Waters Torque Watch 6500-T2 Torque Calibrator Precision.

The calibrated PRS10 10MHz Rubidium standard with interface board and heatsink

Since the OCXO is quite good and there is no DDS circuit inside of the PRS10, so the output sine wave looks good, also its phase noise is low;. one PRS10 module with interface board, heat sink;. the board exist 2 LED for the system.

Trimble ThunderBolt Timing GPS Receiver GPSDO 10MHz 1PPS GPS Disciplined Clock

The 10 MHz is divided down to provide a 1 Pulse Per Second (! The first generation ThunderBolt receivers went out of production in mid 2006 because of Rohas lead free EU rules. ).

Singer Gertsch Ratio Tran RT-61 Rack Mount Ratio Transformer

What you see in the photos is what you are expected to receive. If it is not in the photos it is not included with the sale.

AGILENT /HP 41422-61610 HCU CALIBRATION ADAPTER CABLE

Agilent Hewlett Packard 41422-61610 HCU Calibration Adapter Cable. Part of calibration kit used as part of calibrating Agilent HP 4142B or its 41422A modules used with semiconductor analysis measurement. This came from former use by a major semiconductor manufacturer. It was used and kept in a commercial semiconductor lab area. It is believed to have been working properly at last use.

VLSI STANDARDS NFTS6-1200 Silicon Nitride Film Thicknesd Standard

This is a VLSI STANDARDS NTFS6-1200 Silicon Nitride Film Thickness Standard on a 6 inch wafer. Film type is 120 nanometer thickness Low Pressure Chemical Vapor Deposition (LPCVD). This was made as a NIST Traceable calibration standard. I do not have calibration certificate, but it may still be available from the OEM.

Force Check Cat 40/50 Digital Drawbar Force Gauge Kit

Cat 40 and ST/Cat 50 attachments with Display and case. Everything pictured is included. Part numbers: 461.200.940.000, 461.200.950.000, 461.100.

ADVANTEST Takeda Riken TR6142 PROGRAMMABLE DC Voltage/Current Generator

All of our products are 100% authentic.

ESI (Tegam/IET) Complete SR1030 Resistance Standard Instruction Manual Guide OEM

Calibration Kit Parts 3.5mm Open Shorts Lot

One 3.5mm Female Short 6-BH. One 3.5mm Male Short 5-BF. One 3.5mm Male Short 7-AP. One 3.5mm Short 6BA.

Datel DVC 8500 Voltage Calibrator *Guaranteed* Ships Fast Calibrators INC

All the Flappers are nice and firm -- None are wobbly or loose. NO Rattling or Loose pieces. NO Rust, Dust or Oxidation. NO Dents, Dings, Scuffs, Scrapes.

Data Precision 8200 Programmable DC Voltage Current Calibrator GPIB WITH OPTIONS

Note taking was diligent. We can not confirm, so all units are sold as is.

Digitool Solutions SP-0502 3/8" Portable Torque & Angle Meter 5-50 ft-lb Recharg

Used once! Like brand new! I ship daily!

Roger K. Sherman Co. Precision Line Width Standard LWS-1-XP 2304

Roger K. Sherman Co. Precision Line Width Standard LWS-1-XP 2304

Skidmore Wilhelm Bolt Tension Calibrator, Model P Made In USA

Skidmore Wilhelm Bolt Tension Calibrator, Model P The Skidmore Wilhelm model P-101 3/8" bolt tension tester is a high-quality unit made in the USA. This tool is designed for precision testing and inspection of bolt tension, ensuring optimal performance and safety in industrial applications.This is in good working condition.