Complete Outboard Powerheads
complete outboard powerheads — pre-owned
Browse 968 complete outboard powerheads — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.

Good compression Johnson Evinrude 4906B Powerhead OEM Freshwater
It has good compression on both cylinders, and it turns over smoothly.

Mercury outboard 35 hp powerhead crankcase assy 61779A84
This powerhead is in good working condition, it was removed from a running outboard that was only used in freshwater. The reciprocating assembly is nice and tight. There are no cracks, breaks, or welds on this powerhead.
You save $48.00

1987 OMC Johnson Evinrude 28 hp powerhead crankcase assembly
Here we have a powerhead for 1987 Johnson Evinrude 2 cylinder/2 stroke 28 hp outboards, this may fit other models too. This powerhead is in good working condition. It was removed from a running outboard that was only used in freshwater.
You save $64.50

Mercury outboard 20 hp powerhead crankcase assy 6434A1
This powerhead is in good working condition, it was removed from a running outboard that was only used in freshwater. The reciprocating assembly is nice and tight. There are no cracks, breaks, or welds on this powerhead.
You save $48.00

2006 Suzuki Df200-Df225-Df250 6 Cylinder Powerhead Crankcase Assembly
Hi I am selling this 2006 Suzuki df225 4 stroke powerhead this was removed from a running motor with good compression on all cylinders 185-190 and motor sounded good when we started it before tear down comes exactly as shown in the pictures ECU AND INTAKE WERE REMOVED MOTOR WAS PARTED OUT DUE TO A MIDSECTION ISSUE please feel free to ask any and all questions and I will be do my best to answer them for you thanks.

5006190 586765 586964 5006454 5006514 Evinrude Powerhead 40/50HP 2006 2007
CLYINDER / CRANKCASE ASSEMBLY Part No. 5006190. FLYWHEEL PN 0586765 (Superseded to PN 0586964); Digitally Stamped: 586765. CYLINDER HEAD ASSEMBLY PN 5006514. Evinrude E-TEC (ETEC) Outboard Motor COMPLETE Powerhead Assembly.

Mercury Outboard 2001 50/60HP 2-stroke 3-CYL Power Head 852071T97 (2683)
Part#: 852071T97.

Freshwater Used OEM Honda 40/50 Hp 4-Stroke Carb Outboard Powerhead # Bf40/50

YAMAHA LONG BLOCK CRANK CYLINDER ASSY, 6H3-W0090-30-4D 60HP TWO STROKE, 124EP-35
YAMAHA LONG BLOCK, CRANK CYLINDER ASSY, NEEDS INNER AND OUTER COVER EXHAUST AND GASKETS, NEEDS 1 EXHAUST BOLT DRILLED AND TAPPED, COMPRESSION IS: 120, 120, 110, NO KNOCKS RAN ENGINE FOR 1 MINUTE. IT IS YOUR RESPONSIBILITY TO VERIFY THIS PART FITS YOUR ENGINE BUT I CAN HELP IN ANY WAY I CAN.

Force 120hp Outboard Powerhead Freshwater Good Compression
This powerhead came off a Mercury force 120 hp freshwater only motor. This was a fully running motor with compression of 150psi on all cylinders. The customer upgraded to a four stroke is only reason this motors being sorted out. It’s in great condition and will fit many different years and sizes of Mercury force outboards.

Mercury 75-90-115 1.7L 4-stroke powerhead crankcase assembly 897148A09
This Powerhead was tested prior to removal 🛠️ SUPPORT & INSTALLATION HELP. • Need it sooner?. Let us know — we can often accommodate rush orders.

2017 Mercury 150 3.0L 4-stroke Outboard Cylinder Head assembly 8M0098629
If Picking up in Person here in Florida only Cash is accepted.

Johnson V4 60° Outboard Powerhead 0438921 Fits 1995-2000 115HP (2805)
Good Used Johnson V4 60° Carbureted Power Head. Fits 1995-2000 115HP Motors. WILL NEED NEW HEAD GASKETS.

Gear case / lower unit 2000 Model 60 Hp Johnson
Complete gearcase off a 2000 model 3 cyl 60 hp Johnson has fairy new impeller & gear oil , it’s been repainted

1995-2004 OMC Johnson Evinrude 40-50 hp powerhead crankcase assembly 437342
For sale is the powerhead for 1995-2004 OMC Johnson Evinrude 40-50 hp outboards(2 cylinder, 2 STROKE), this may fit other years too.This powerhead is in good working condition, it was removed from a running outboard that was only used in freshwater.
You save $97.50

Evinrude Etec V4 115-130 HP PowerHead Assembly Crankcase. 5007555
This item was removed from a 2007 Etec 115 HP outboard engine. This Powerhead was tested prior to removal 🛠️ SUPPORT & INSTALLATION HELP. • Need it sooner?. Let us know — we can often accommodate rush orders.

120-125 psi Good Suzuki DT135 Powerhead Crankcase OEM

2001 Yamaha 50 HP 2 Stroke Outboard Powerhead Complete
Complete powerhead from a 2001 Yamaha 2-stroke outboard model number 50TLRZ, serial number 446831. Removed from a running outboard. Compression is 115-120 psi in all three cylinders. Everything shown in the pictures is included. Please verify fitment before purchase.

Mercury Outboard 250hp Pro XS 6CYL 3.0L Power Head Freshwater Running Take Off
This powerhead has 800 hours on it.

80-110 psi Yamaha HPDI Powerhead OEM 60Y-W0090-16-1S 60V-15100-03-1S Freshwater
The compression is 80, 105, 110, 110, 110, and 110. The crankshaft turns over smoothly.

Johnson Evinrude OMC 200 225 250 Hp 90° Looper V6 Outboard Powerhead OceanRunner
This item was removed from a 1997 200 HP Evinrude 90 degrees looper Carbeurated outboard engine. This Powerhead was tested prior to removal 🛠️ SUPPORT & INSTALLATION HELP. • Need it sooner?. Let us know — we can often accommodate rush orders.

Evinrude Etec 75-90 HP PowerHead Assembly Crankcase. 5005280
Hi I am selling this powerhead removed from a 2006 evinrude eTec 90 This motor came in as a good running motor, but it was a 25 inch and that’s very hard to sell here powerhead has good compression on all cylinders 110-120 comes exactly as shown please feel free to ask any and all questions and I will do my best to answer them for you thank you

1986 Force 125hp Outboard Power Head 84,85,86,87,88,89,90,91,92,93,94 Powerhead
For sale is a complete Power Head assembly Removed from a 1986 Force 125hp. It is in great condition. It was running before it was removed. It had new exhuast plate gasket installed just before it was removed from the boat.

1982 Johnso Evinrude Outboard Power Head 25 - 35HP (150 PSI Across The board
Taken off from a 1982 Johnson 35HP power head from running outboard from fresh water engine (150 psi Across the board model( J35ELCND

85-105 psi Mercury Optimax Pro XS 3.0L Powerhead OEM 9811A28 9811A27 Freshwater

Mercury Outboard 1997 225HP 3.0L EFI Short Block Powerhead (2122)
Will fit a 225-250 EFI / Carb. Cylinder Block #:9811A19. Compression was 100-105 On all cylinders.

2014 Mercury Verado L6 Powerhead Dressed 300 HP 175-185 PSI RUNNING MOTOR
The motor has great compression. I ran prior to removal on the hose and it sounds great. I have a video of it running prior to removal. Its a complete powerhead minus the PCM. There is a little corrosion at the base on the intake integrated air fuel module which i took several pics of.

130 136 PSI OEM Mariner Yamaha 40hp Powerhead Freshwater From S/N 6E9-425323
It is from an engine with the serial number "6E9-425323".

1986 Mariner 15 Powerhead 110psi Compression 1985-1992 9.9/15 Yamaha /Mariner
110 psi cold compression removed for 1986 Mariner 15hp. Please do your research for parts fitment

Mercury 135-150 2.5L Optimax powerhead crankcase assembly 858961A8 2001-2016
This Powerhead was tested prior to removal 🛠️ SUPPORT & INSTALLATION HELP. Residential rates are the most expensive. Pickup is available. • Need it sooner?. Let us know — we can often accommodate rush orders.

2006-2007 Evinrude E-Tec 75hp-90hp Outboard Motor Etec Powerhead 75 90 hp Engine
Part:Evinrude E-Tec 75-90hp Powerhead. It was removed from a running 2007 Evinrude E-Tec 75HP outboard motor. Condition:In Excellent Used Condition. Removed from a running engine with a bad lower unit.
You save $339.00

1982 Mercury 70HP POWERHEAD USED RUNS Good Compression Test
this is used and was running before being stripped for parts, the serial number of the engine is 6074292. I have included a video of the engine running before being taken apart for ebay. i have also included photos of the compression test, the compression test was done cold with the throttle open. it will ship in a wooden crate via ups or can be picked up in logan iowa 51546 please feel free to ask any questions you may have.

90-105 PSI OEM Evinrude Johnson V6 150hp Powerhead 5006010 0438422 Freshwater
It turns over smoothly.

2016 Yamaha F50HP 4 Stroke Powerhead 4 Cylinder Freshwater Read Description
Good compression but needs new head gasket. Off an Ohio lake boat that was freshwater only. Water was mixed with oil. But block all together is in good condition.

OEM 2008 90hp 90TLR Yamaha Outboard Powerhead - Running Take off 110 110 115 PSI
OEM 2008 90hp 90TLR Yamaha Outboard Powerhead - Running Take off. 2008 90TLR Yamaha w/side oil tank.

1984 Mercury 90-115HP 2 Stroke Outboard Powerhead 97472A32 OEM Good Compression

Good Evinrude Johnson Powerhead Crankcase OEM 0396915 0432013 Freshwater
The crankshaft turns over smoothly, and both cylinders have good compression. This powerhead is from a running engine.

Force 85hp Outboard Power Head 84,85,86,87,88,89,90,91,92,93 Powerhead 1984-1989
For sale is a complete Power Head assembly removed from a 1989 Force 85hp. It is in good condition and was running before it was removed. This will fit many of the 85HP & 90HP Force outboards. 15 Spline.

Johnson Outboard Powerhead 1996 9.9HP 4-Stroke (L12- 1346)
Johnson Evinrude Outboard Powerhead1996 9.9HP 4-StrokePlease be sure you are ordering the correct part before purchasing. We also DO NOT accept returns on New Installed Electrical Components If you are not sure or have any questions please email us or call with your Serial/Model number. If for any reason the item is defective or not as described please let us know as soon as you receive the item so we can correct the problem. IF FREE OR FLAT RATE SHIPPING IS OFFERED ITS FOR THE LOWER 48 STATES ONLYALASKA, HAWAII & PUERTO RICO NEED TO EMAIL US FOR A QUOTE .

Mercury Outboard Powerhead 1995 8hp 2 stroke 811686A92 (2171)
Used Mercury Powerhead85 PSI on both cylindersPart# 811686A92, 811686A97, 811686T97Came off a 1995 Mercury 8HP 2 StrokeModel# 0A962668Please be sure you are ordering the correct part before purchasing. We also DO NOT accept returns on New Installed Electrical Components If you are not sure or have any questions please email us or call with your Serial/Model number. If for any reason the item is defective or not as described please let us know as soon as you receive the item so we can correct the problem. IF FREE OR FLAT RATE SHIPPING IS OFFERED ITS FOR THE LOWER 48 STATES ONLYALASKA, HAWAII & PUERTO RICO NEED TO EMAIL US FOR A QUOTE .