Chassis, Drivetrain & Wheels
chassis, drivetrain & wheels — pre-owned
Browse 11,334 chassis, drivetrain & wheels — pre-owned on eBay — listings updated every few minutes. All items are pre-owned and sold by eBay sellers directly.
Axial SCX10.3 1:10 Slider. Comes with 2 speed servo and stainless steel screws.
Axial SCX10.3 1:10 Slider. Comes with 2 speed servo and stainless steel screws.
nikko daddy dash chassis parts or project very rare
nikko dandy dash very rare item what you see is what you get
You save $35.00
DHK Maximus 1/8 4x4 MT Roller Chassis w Modified Motor Mount for Long Can Motors
DHK Maxiumus 1/8th Scale Monster Truck Roller Chassis with Modified Motor Mount for Long Can Motors. This set up will fit long can motors with smooth can, it will also fit the 1/8 Castle sidewinder smooth can 2200kv motor, however it WILL NOT FIT THE 2200KV MOTOR WITH THE RIBS AS THEY LIFT THE MOTOR JUST ENOUGH TO MISS THE MOUNTING HOLES.
Vintage TC3 HCR Hardcore Racing Purple Titanium Rear Shocktower Shock Tower RARE
(34) Lot Vintage RC Car Pinion Gears Used Mix Lot Various Pitch & Teeth
Random pitch / tooth RC Vintage lot (34) new / used lot See pics There are a few that have bigger shaft diameter but majority vintage standard brushed motor shaft Most have no set screws See pics
Vintage Traxxas Sledge Hammer w/ original body, used, excellent condition!
HPI Racing RS4 MT 4wd Monster Truck W/ Options Extra Body & Parts Vintage RC
Great condition. It has a ton of option parts and extras. It has mostly all of the HPI option parts which are all very hard to find. The gear diffs were upgraded to ball diffs and bushings upgraded to bearings.
4 Used Vanquish Products KMC XD127 Bully 1.9" Beadlock Crawler Wheel Orange 0676
HPI A911 Two Speed Transmission - RS4 Nitro - w/Clutch Bell - 44/41 & 13/16
HPI Nitro RS4 Two-Speed Transmission. Spur gears have 44 & 41 teeth and clutch bell has 13 & 16 teeth. Everything shown is included. Was removed from a working HPI Nitro RS4 2 R/C car. 1/10 Scale.
Losi TLR SCTE 3.0 Roller Slider Chassis 1/10th Scale 4WD Short Course Truck
Losi TLR SCTE 3.0 Roller Slider Chassis 1/10th Scale 4WD Short Course Truck. It was used for 1 season. Comes with brand new Pro-Line Caliber SC tires pre-mounted. What you see is what you get. RC stand NOT INCLUDED.
VINTAGE (RARE) TEAM CRP 4211 front tires and (4) PRO-LINE TRAC-TA-GATOR
These tires are very hard to find PRO-LINE TRAC-TA-GATOR TIRES made in the 80s TEAM CRP 4211 front spike tires u can Google them iff u need more info CHECK PICS any questions please ask ships to lower 48 states only do to nature of hobby no returns
Axial UTB10 Capra 1.9 4WS Unlimited Trail Buggy Front Rear Portal Axles St Link
1/10 Axial Capra 4WS 1.9 Unlimited Trail Buggy front and rear Currie F9 portal axles with steering links. These were removed from a new 1/10 Axial Capra 4WS 1.9 Unlimited Trail Buggy model AXI-1543T1 or AXI1543T2.
You save $33.53
Pro-Line Badlands MX57 Tires on Black Raid 24mm Hex Wheels Traxxas X-Maxx XRT
Set of 4 Pro-Line Racing 1/6 Badlands MX57 Front/Rear 5.7” Tires Mounted on Black Raid wheels. The wheels have 24mm hexes and will fit the Traxxas XRT and X-Maxx. Wheels and tires are in good shape with lots of tread left on them. FREE SHIPPING
Novak Ballistic 540 1/10 25.5 Turn sensored brushless motor, tested and working
Novak Ballistic 540 1/10 25.5 Turn sensored brushless motor, tested and working
You save $8.25
Castle Creations Copper Head 1/10, tested and working but only as sensorless
Castle Creations Copper Head 1/10, tested and working but only when sensorless, when attempting to test it sensored the motor will not start.
You save $11.10
HCR Hardcore Racing TC3 Front & Rear Titanium Shock Tower Shocktowers Set RARE
These are Rare and hard to find, they are used and have signs of wear but are in excellent functional condition.
Vintage HPI RS4 Nitro Side Belt Tensioner - Purple Aluminum
Anodized purple aluminum material. Was removed from a working HPI Nitro RS4 2 R/C car. 1/10 Scale.
Vintage HPI RS4 Rally Peugeot 206 4WD, Good condition comes as is w/ whats shown
Body is unique and complete with original decals and two riding passengers inside.
Losi Truggy 17mm Hex Tires Wheels 1/8 8IGHT XTE 4WD Racing Truggy Set 4 4.0
Brand new takeoffs from the new Losi Truggy Fits all 1/8 truggy with 17mm hex like Arrma Kraton 6s or talon 6s and many many more Sold as set of 4 as shown 17mm hex
Vintage SEES Aluminum Pan Car Wheels
Vintage SEES Aluminum Pan Car Wheels See pictures for details Comes with a new set of rear foam tires
4x Pro-Line BFGoodrich Krawler T/A KX 1.9" Predator Tires 2x Different Foam 1119
Tekno RC SCT410.3 4WD 1/10 Scale Short Course Truck Rolling Chassis Slider
Tekno RC SCT410.3 4WD 1/10 Scale Short Course Truck Rolling Chassis Slider. It was used for 1 season indoor clay then put away. It’s ready to use the way it is but you can give the fluids a tune up if desired. Thank you. It comes as shown. It has Pro-Line Positron tires. RC stand is NOT INCLUDED.
Used Vanquish Currie Front Aluminum Bulkhead Clear w/ Internals Axial Yeti 0003
Used shape, dirty, has scrapes from use, internals roll freely, see all images.
Vintage New Tamiya Radio Box Pin Cam RC buggy SRB Sand Scorcher Race Prep
Made by Race Prep. Sold as-is. Look over the photos for general overall condition of the item.
4x Pit Bull Growler 4.75x1.75 1.9" Crawler Tires on Vanquish Method 105 Wheels
4x Pit Bull Growler 4.75x1.75 1.9" Crawler Tires on Vanquish Method 105 Wheels - This is a used set of tires. They may/will have wear, imperfections, dirt, and other signs of use. Please see pictures closely and check the hexes and tread for wear/defects.
Use Proline Racing Badlands MX43 Pro-Loc 24mm Hub Holes Set of 4
Traxxas Drag Slash Rear Mounted Tires & Black Wheels 9475 MT
2 used wheels. price for each pair of 2 wheels.
HPI RS4 Nitro - Robinson Racing 39 Tooth Ball Differential
HPI RS4 Nitro Robinson ball differential. Aluminum material. Was removed from a working HPI Nitro RS4 2 R/C car. 1/10 Scale. In overall average to good working condition with average wear. Will likely need new ball grease as diff action is rather gritty.
Vintage Tekin RS Brushless control ESC, Tested and working
Vintage Tekin RS Brushless control ESC, Tested and working
You save $12.00
Vintage LRP Sphere Brushed Brushless ESC Tested Working Case Cracked
Vintage LRP Sphere Brushed Brushless ESC Tested & Working, Deans Battery Connector, CASE CRACKED AS SEEN IN PHOTOS.
You save $15.15
KC Racing brushed motor "MS-6", tested and working
You save $8.40
RPM Ultramold car, Very clean with new black transmission case and links
4 Traxxas Big Bore 100mm Aluminum Shocks T-Maxx RC Monster Truck Clodbuster
Nice shocks to upgrade your truck with. There only 4 shocks (on t-maxx 8 shocks). Used on T-Maxx and in retro monster trucks they are good shocks to use on Clodbuster. Shock housing and cap are made out of aluminum.
Fit Traxxas 8S X-Maxx Ultimate Blue Aluminum Caster Steering Block Axle Carriers
Fits Traxxas 1/5 8s X-maxx Ultimate front blue 6061-T6 aluminum caster blocks, steering blocks, rear stub axle carriers and bearings. Parts were removed from a new 1/5 scale Traxxas 8s X-maxx Ultimate model 77097-4.
You save $28.23
HPI RS4 Pro-Nitro-Racer Purple Sway Bar Kit
Includes everything as shown. Was removed from a working HPI Nitro RS4 2 R/C car. 1/10 Scale.
DuraTrax Maximum MT Chassis
DuraTrax Maximum MT chassis This is used and being offered as parts or restoration. Please inspect pictures carefully, everything included is in the pictures. NOTE: the gearbox seems to have issues. the spur gear spins but there is no movement with the differential. The differential seems to work, but not connected to the gear. There’s most likely stripped gears inside the gearbox. This is ideal for parts or electric conversion project
HPI A209 SWAYBAR SET WIDE GREEN FOR SUPER NITRO PRO 2 NITRO RS4 MINI SUPER EP
WHAT YOU SEE IS WHAT YOU GET A SET OF HPI A209 SWAYBARS AND MOUNTS FOR THE NITRO RS4, SUPER NITRO RS4, PRO 2, NITRO RS4 MINI, AND NITRO RS4 2 MODELS.
Corrupt Carbon Works Gold Ninja Chassis W Links,skid,t-case, Fmm
Corrupt Carbon Works Gold Ninja Chassis with Links, Skid, ccw t-case, ccw front motor mount, and body post mounts
Element RC Enduro 1/10 Front & Rear Axle Set w/ Treal Brass Upgrades
Brass front C-hubs/steering upgrades. Complete front and rear axle set. Rear aluminum lower link mounts. Smooth rolling and ready for installation.
Vintage Trinity Cobalt spec brushed 1/10 motor, tested and working, 14 turn
You save $8.10