Chassis Plates, Frames & Kits

Axial SCX10.3 1:10 Slider. Comes with 2 speed servo and stainless steel screws.

Axial SCX10.3 1:10 Slider. Comes with 2 speed servo and stainless steel screws.

nikko daddy dash chassis parts or project very rare

nikko dandy dash very rare item what you see is what you get

DHK Maximus 1/8 4x4 MT Roller Chassis w Modified Motor Mount for Long Can Motors

DHK Maxiumus 1/8th Scale Monster Truck Roller Chassis with Modified Motor Mount for Long Can Motors. This set up will fit long can motors with smooth can, it will also fit the 1/8 Castle sidewinder smooth can 2200kv motor, however it WILL NOT FIT THE 2200KV MOTOR WITH THE RIBS AS THEY LIFT THE MOTOR JUST ENOUGH TO MISS THE MOUNTING HOLES.

Team Associated TC4 Graphite Chassis Plate And Battery Hold Down

Team Associated TC4 Graphite Chassis Plate And Battery Hold Down

Traxxas Nitro 4Tec Vintage Chassis RC Car Parts

Traxxas Nitro 4Tec Vintage Chassis RC Car Parts Has trans parts and some of the rear suspension assembed and working non tested servo sold as is

DuraTrax Maximum MT Chassis

DuraTrax Maximum MT chassis This is used and being offered as parts or restoration. Please inspect pictures carefully, everything included is in the pictures. NOTE: the gearbox seems to have issues. the spur gear spins but there is no movement with the differential. The differential seems to work, but not connected to the gear. There’s most likely stripped gears inside the gearbox. This is ideal for parts or electric conversion project

HPI Racing RS4 MT 4wd Monster Truck W/ Options Extra Body & Parts Vintage RC

Great condition. It has a ton of option parts and extras. It has mostly all of the HPI option parts which are all very hard to find. The gear diffs were upgraded to ball diffs and bushings upgraded to bearings.

Corrupt Carbon Works Gold Ninja Chassis W Links,skid,t-case, Fmm

Corrupt Carbon Works Gold Ninja Chassis with Links, Skid, ccw t-case, ccw front motor mount, and body post mounts

Tamiya 1/10 CHASSIS TT-02 4WD Chassis W/ MOTOR W/3 Upgrades

HPI A933 Nitro RS4 2 Racer Graphite Top Deck W/ Posts

Losi TLR SCTE 3.0 Roller Slider Chassis 1/10th Scale 4WD Short Course Truck

Losi TLR SCTE 3.0 Roller Slider Chassis 1/10th Scale 4WD Short Course Truck. It was used for 1 season. Comes with brand new Pro-Line Caliber SC tires pre-mounted. What you see is what you get. RC stand NOT INCLUDED.

Team Associated TC3 RPM Blue Front Bumper & Trinity Foam & Custom Top Plate RC

Up For Sale Is A Team Associated TC3 RPM Blue Front Bumper & Trinity Foam & Custom Top Plate. RPM Bumper Is A Bit Scraped Up, Others Are In Nice Lightly Used Condition, With Some Small Defects. As Seen In Pics. If You Have Any Questions Please E-mail Me I can Also Take More Pics If Needed Let Me Know.Due To The Nature Of This Hobby Everything Is Sold As Is. Thank You.

Hpi Rs4 Carbon Chassis Electric Parts Chassis

Hpi Rs4 Carbon Chassis Electric Parts Chassis Most of it is there has some missing broken pieces Does have top and bottom parts for chassis all bolt holes appear in proper condition will be a good project or parts car it’s got a lot of good parts remaining and is pretty hard to come by has it some of the drivetrain remaining that still spins and works Will provide more information or photos to serious buyers thanks

Vintage TC3 HCR Hardcore Racing Purple Titanium Rear Shocktower Shock Tower RARE

HCR Hardcore Racing TC3 Front & Rear Titanium Shock Tower Shocktowers Set RARE

These are Rare and hard to find, they are used and have signs of wear but are in excellent functional condition.

Exotek Aluminum Chassis W/ Saddle Pack Setups Rare For Team Associated SC10 4x4

Good used setup for Exotek Aluminum Chassis with center and forward battery arrangements. Both of these carbon battery strap sets are by Exotek and are designed for this chassis. Returns are NOT accepted due to the nature of the hobby. Thank you for your interest, and God bless. :)

Traxxas 2521X Graphite Upper Deck (NB SQ #1) - Traxxas SRT

From a New build Shelf Queen and in Mint condition.

Traxxas 2wd Stampede Bigfoot BL-2s Screws Hex Fasteners & Tools Nuts XL-5 Black

Traxxas 2wd Stampede Bigfoot BL-2s screw and tool kit. These were removed from a new 2wd Stampede Bigfoot BL-2s, model 36334-8. 95% of the screws will fit all 2wd Stampede trucks. Condition-New take off screws.

Losi XXX-SCT Chassis W/ Upper Brace Battery Strap Servo Mounts Used LOSB2410

One used team Losi xxx-act chassis along with the upper deck/brace, servo mounts and battery strap. It is used and has been raced with so it does have scratches on the chassis. They are shown in the photos.

Fits Traxxas 64077-3 XO-1 - CENTER blue DRIVESHAFT drive hub pinion gears screw

Driveshaft, center, 6061-T6 aluminum (blue-anodized) (TRA6456). Rear diff pinion gear (TRA6879). Front diff pinion gear (TRA5379X). Front drive hub, hardened steel w/screw pin (TRA6888X). If the screws are pictured, they are included.

Vintage RC10 Graphite Team Car Stealth Trans /Novak ESC /Futaba Parts W/ Manual

Team Associated RC10 — Original Graphite Team Car. Built with period-correct electronics and complete with the original instruction manual. • ✅ Team Associated RC10 Graphite Team Car chassis. • ✅ Original Team Associated RC10 Instruction Manual — carbon weave cover edition.

Fits Slash Modified - CHASSIS (Low CG Gray composite 5832G Traxxas 104354-74

5832g - Chassis - LCG. The manufacturers warranty will not be valid in most cases. If the screws are pictured, they are included.

Fits Traxxas 64077-3 XO-1 - SPUR GEAR, slipper clutch center cush drive M1 46t

Housing, cush drive (front & rear halves) (TRA6464). Input shaft (cush drive)/ pin (TRA6466). Drive hub, center, rear (1)/ front (1)/screw pin (TRA6888). If the screws are pictured, they are included.

Vintage O'Donnell Z01B Grab Bag of Miscellaneous - Read Me & Look at Pictures #4

New and Used?. Miscellaneous Parts for the Z01B Buggy. Look at Photographs.

Arrma V2 Limitless Battery Box Straps Side Skirt Set Electronics Module Braces

This was removed from a new Arrma V2 Limitless. These are about 6-1/4in long.

Fit Traxxas 1/5 8s X-Maxx Screws Tool Hardware Set Kit Fastener Wheel Hex Wrench

Fits Traxxas 77086-4 1/5 8s X-Maxx screw and tool set. These were carefully removed from a new 8s X-Maxx truck. This is not every screw on the vehicle, only the ones we remove during disassembly (about 95%).

Fits Traxxas 64077-3 XO-1 - HIGH SPEED PINION GEAR - 34 tooth 34t 1m

Fits XO-1 HIGH SPEED PINION GEAR - 34 tooth 34t 1m (#6493) 64077-3. If the screws are pictured, they are included. The manufacturers warranty will not be valid in most cases.

Fits Traxxas Supra GT4 93064-4 - CHASSIS, composite 9345 plate

Fits Supra GT4 - CHASSIS, composite 9345 plate 93064-4. Unique to the Toyota Supra GT4. 9345 - Just the bare grey composite chassis. The manufacturers warranty will not be valid in most cases. If the screws are pictured, they are included.

VTG Team Associated RC10 Black Pan Chassis B-Stamp Stealth Transmission Roller

Vintage Team Associated RC10 buggy roller. This is a highly sought-after B-Stamp black pan chassis featuring a Stealth transmission. The chassis shows significant scratches and wear on the underside from previous track use, and the white nylon parts show typical yellowing and aging. Includes front and rear shock towers, shocks, A-arms, and battery cup. Being sold as a roller/project for restoration. Does not include electronics, wheels, tires, or body. Perfect for a vintage RC enthusiast looking to restore a piece of RC history. 1944-PC

HPI crawler bumper 85059 incomplete

HPI crawler bumper 85059 incomplete, bought this set for my crawler build but didn't need these extra parts.

Tekno RC SCT410.3 4WD 1/10 Scale Short Course Truck Rolling Chassis Slider

Tekno RC SCT410.3 4WD 1/10 Scale Short Course Truck Rolling Chassis Slider. It was used for 1 season indoor clay then put away. It’s ready to use the way it is but you can give the fluids a tune up if desired. Thank you. It comes as shown. It has Pro-Line Positron tires. RC stand is NOT INCLUDED.

Vintage New Team Associated RC10T RC Stadium Truck Nose Chassis Plate 1/10

Original 1990’s RC10T nose plate. It was not used. In great shape. Sold as-is. Look over the photos for general overall condition of the item.

M-08 Aluminum Motor Bridge Tamiya 54968 With Chassis Uprights

As pictured

Axial Wraith 1.9 Poison Spyder Racing Body Fastback Chassis

good used axial wraith 1.9 chassis with rare poison spyder body fast back chop and interior as is, no refunds or returns due to nature of hobby

Arrma V6 Kraton 6s BLX EXB Battery Tray &Receiver Box Set ARA8708 Outcast Mojave

They also fit the Arrma 6s Kraton, Outcast, Notorious, Talion, Typhon and Mojave. This battery tray will accommodate batteries up to.

Toyota FJ Chassis Frame HPI Venture Sbk Scale Builder Kit 1:10 Crawler HPI117255

Frame, some links, and front motor mount with trans , no t case or axle etc … you get only what you see, nothing more or less . Any questions please feel free to msg me.

Hot Trick Associated Rc10 Wide Front End/Nose Plate Red

Up for sale is a used Hot Trick Associated rc10 wide front end/nose plate in color red. can be used with classic short front suspension arms or can be used with the long arms for an even wider stance. Has scuffs and scratches consistent with being used but overall in good condition. Please look at all pictures. Please reach out with any questions. Thanks for looking.

Prather Products Radio Box for Prather 31" and 40" Outboard Deep Vee Boats 8110

This will give you access to the full website which will show the link.

Traxxas 1/10 RC Car Rolling Chassis Frame w/ Suspension Arms & Shocks

The Traxxas 1/10 RC Car Rolling Chassis Frame is designed specifically for electric cars, featuring suspension arms and shocks for improved performance on various terrains. This chassis is compatible with Traxxas vehicles and offers a sturdy and durable foundation for customizing and upgrading your RC car. With the trusted Traxxas brand behind it, this frame is a reliable choice for hobbyists looking to enhance their remote-controlled car's handling and overall functionality. E revo UPGRADED parts!!!!!!

Rovan LT 5T Front A Brace Support Arm fit HPI Losi 5IVE T King Motor

The Rovan LT 5T Front A Brace Support Arm is a high-quality RC model vehicle part designed specifically for the HPI Losi 5IVE T King Motor. This chassis component is made by the brand RV and is suitable for gasoline-powered cars in 1:5 scale. The support arm is essential for maintaining the structural integrity of the vehicle, ensuring smooth and stable performance during off-road racing. Perfect for hobbyists and enthusiasts looking to enhance their RC car's performance, this front A brace is a must-have for the Losi 5IVE model.